- 26 2月, 2008 1 次提交
-
-
由 Daniel Veillard 提交于
src/remote_internal.c src/test.c src/util.c src/util.h src/xen_unified.c: added probe interface at the driver level, use that to improve default hypervisor selection in the absence of a given URI when connecting Daniel
-
- 23 2月, 2008 1 次提交
-
-
由 Jim Meyering 提交于
Avoid warnings like this: file:nnn:format not a string literal and no format arguments * qemud/qemud.c: Insert a "%s" format argument. * qemud/remote.c: Likewise. * src/iptables.c: Likewise. * src/qemu_driver.c: Likewise. * src/storage_backend.c: Likewise. * src/storage_backend_fs.c: Likewise. * src/storage_backend_iscsi.c Likewise. * src/storage_backend_logical.c: Likewise. * src/storage_conf.c: Likewise. * src/storage_driver.c: Likewise.
-
- 22 2月, 2008 1 次提交
-
-
由 Jim Meyering 提交于
Also add "make syntax-check" rules to ensure no new uses sneak in. There are many uses of write like this: if (write (fd, xml, towrite) != towrite) return -1; The problem is that the syscall can succeed, yet write less than the requested number of bytes, so the caller should retry rather than simply failing. This patch changes most of them to use util.c's safewrite wrapper, which encapsulates the process. Also, there were a few cases in which the retry loop was open-coded, and I replaced those, too. * Makefile.maint (sc_avoid_write): New rule, to avoid recurrence. * .x-sc_avoid_write: New file. Record two legitimate exemptions. * qemud/qemud.c (sig_handler, qemudClientWriteBuf): Use safewrite, not write. * src/conf.c (__virConfWriteFile): Likewise. * src/qemu_conf.c (qemudSaveConfig, qemudSaveNetworkConfig): Likewise. * src/qemu_driver.c (qemudWaitForMonitor, qemudStartVMDaemon) (qemudVMData, PROC_IP_FORWARD): Likewise. * proxy/libvirt_proxy.c: Include "util.h". (proxyWriteClientSocket): Use safewrite. * src/test.c (testDomainSave, testDomainCoreDump): Likewise. * src/proxy_internal.c (virProxyWriteClientSocket): Likewise. * src/virsh.c: Include "util-lib.h". (vshOutputLogFile): Use safewrite. * src/console.c: Include "util-lib.h". (vshRunConsole): Use safewrite.
-
- 08 2月, 2008 1 次提交
-
-
由 Jim Meyering 提交于
* po/POTFILES.in: Add names of many new files. * Makefile.maint (err_func_re): Add qemudLog. Mark diagnostics with _(...). Split some long lines. * qemud/qemud.c (remoteCheckCertFile, remoteInitializeGnuTLS): (qemudDispatchSignalEvent, qemudSetCloseExec, qemudSetNonBlock): (qemudWritePidFile, qemudListenUnix, remoteMakeSockets): (remoteListenTCP, qemudInitPaths, qemudInitialize): (qemudNetworkInit, remoteInitializeTLSSession, remoteCheckDN): (remoteCheckCertificate, remoteCheckAccess, qemudDispatchServer): (qemudClientReadBuf, qemudDispatchClientRead): (qemudClientWriteBuf, qemudDispatchClientWrite, qemudOneLoop): (remoteConfigGetStringList, checkType, GET_CONF_STR): (remoteConfigGetAuth, remoteReadConfigFile, main): * qemud/remote.c (remoteDispatchAuthSaslInit, remoteSASLCheckSSF): (remoteSASLCheckAccess, remoteDispatchAuthSaslStart): (remoteDispatchAuthSaslStep, remoteDispatchAuthSaslInit): (remoteDispatchAuthSaslStart, remoteDispatchAuthSaslStep): (qemudGetSocketIdentity, remoteDispatchAuthPolkit): * src/iptables.c (notifyRulesUpdated, MAX_FILE_LEN, iptRulesSave): (iptRulesReload): * src/qemu_conf.c (qemudExtractVersionInfo, qemudLoadConfig): (qemudLoadNetworkConfig, qemudScanConfigDir): * src/qemu_driver.c (qemudSetCloseExec, qemudSetNonBlock): (qemudAutostartConfigs, qemudStartup, qemudReload): (qemudWaitForMonitor, qemudStartVMDaemon, qemudVMData): (qemudShutdownVMDaemon, qemudStartNetworkDaemon): (qemudShutdownNetworkDaemon, qemudMonitorCommand): (qemudDomainUndefine, qemudNetworkUndefine): * src/uuid.c (virUUIDGenerate): * src/xm_internal.c (xenXMAttachInterface):
-
- 06 2月, 2008 1 次提交
-
-
由 Jim Meyering 提交于
* Makefile.cfg (local-checks-to-skip): Remove sc_trailing_blank. * .x-sc_trailing_blank: New file, to exempt the few binary files.
-
- 05 2月, 2008 1 次提交
-
-
由 Jim Meyering 提交于
* Makefile.maint (sc_prohibit_virBufferAdd_with_string_literal): New rule. * src/buf.h (virBufferAddLit): Define. * src/conf.c (virConfSaveValue): Use virBufferAddLit, in place of virBufferAdd everywhere possible. (virConfSaveEntry): Likewise. * src/qemu_conf.c (qemudGenerateXML, qemudGenerateNetworkXML): Likewise. * src/qemu_driver.c (qemudGetFeatures, qemudGetCapabilities): Likewise. * src/test.c (testDomainDumpXML, testNetworkDumpXML): Likewise. * src/xen_internal.c (xenHypervisorMakeCapabilitiesXML): Likewise. * src/xend_internal.c (xend_parse_sexp_desc_os): Likewise. (xend_parse_sexp_desc, sexpr_to_xend_topology_xml): Likewise. * src/xm_internal.c (xenXMDomainFormatXML, xenXMDomainPinVcpu): Likewise. * src/xml.c (virSaveCpuSet, virParseXenCpuTopology): Likewise. (virDomainParseXMLGraphicsDescImage): Likewise. (virDomainParseXMLGraphicsDescVFB, virDomainParseXMLOSDescHVM): Likewise. (virDomainParseXMLOSDescPV, virDomainParseXMLDiskDesc): Likewise. (virDomainParseXMLIfDesc, virDomainParseXMLDesc): Likewise.
-
- 30 1月, 2008 2 次提交
-
-
由 Jim Meyering 提交于
Use <config.h>, not "config.h", per autoconf documentation. * Makefile.cfg (local-checks-to-skip) [sc_require_config_h]: Enable. * .x-sc_require_config_h: New file, to list exempted files. * Makefile.am (EXTRA_DIST): Add .x-sc_require_config_h.
-
由 Jim Meyering 提交于
Likewise, given if (foo != NULL) free (foo); remove the useless "if" test. * proxy/libvirt_proxy.c: Remove unnecessary "if" test before free. * python/generator.py: Likewise. * qemud/qemud.c: Likewise. * src/buf.c: Likewise. * src/conf.c: Likewise. * src/hash.c: Likewise. * src/iptables.c: Likewise. * src/libvirt.c: Likewise. * src/openvz_conf.c: Likewise. * src/qemu_conf.c: Likewise. * src/qemu_driver.c: Likewise. * src/remote_internal.c: Likewise. * src/test.c: Likewise. * src/virsh.c: Likewise. * src/virterror.c: Likewise. * src/xen_internal.c: Likewise. * src/xen_unified.c: Likewise. * src/xend_internal.c: Likewise. * src/xm_internal.c: Likewise. * src/xml.c: Likewise. * src/xmlrpc.c: Likewise. * src/xs_internal.c: Likewise. * tests/testutils.c: Likewise. * tests/xencapstest.c: Likewise. * tests/xmconfigtest.c: Likewise.
-
- 22 1月, 2008 1 次提交
-
-
由 Daniel P. Berrange 提交于
-
- 14 1月, 2008 1 次提交
-
-
由 Jim Meyering 提交于
* src/qemu_conf.c: Add "static" and "const" attributes to some globals. * src/qemu_conf.h: Update a declaration. * src/qemu_driver.c (qemud_driver): Declare static. Author: Jim Meyering <meyering@redhat.com>
-
- 10 1月, 2008 2 次提交
-
-
由 Mark McLoughlin 提交于
and run lokkit each time a new rule is added.
-
由 Daniel P. Berrange 提交于
-
- 12 12月, 2007 1 次提交
-
-
由 Jim Meyering 提交于
Given code like: T *var = calloc (n, sizeof (T)); Convert to this: T *var = calloc (n, sizeof (*var)); This first-cut change adjusts all malloc, calloc, and realloc statements. The only binary differences are in remote_internal.c (due to the bug fix) and in xmlrpc.c (due to factorization). * python/libvir.c: As above. * qemud/event.c: Likewise. * qemud/mdns.c: Likewise. * qemud/qemud.c: Likewise. * qemud/remote.c: Likewise. * src/bridge.c: Likewise. * src/buf.c: Likewise. * src/conf.c: Likewise. * src/hash.c: Likewise. * src/iptables.c: Likewise. * src/openvz_conf.c: Likewise. * src/qemu_conf.c: Likewise. * src/qemu_driver.c: Likewise. * src/test.c: Likewise. * src/xen_internal.c: Likewise. * src/xen_unified.c: Likewise. * src/xm_internal.c: Likewise. * src/xml.c: Likewise. * tests/qemuxml2argvtest.c: Likewise. * src/xmlrpc.c (xmlRpcValuePtr): Likewise, and minor factorization. * src/remote_internal.c (remoteAuthMakeCredentials): Use the right type when allocating space for an array of cred _pointers_.
-
- 06 12月, 2007 2 次提交
-
-
由 Jim Meyering 提交于
New files go into these directories: gnulib/lib gnulib/m4 gnulib/tests * bootstrap: A wrapper around gnulib-tool. * configure.in: Invoke gl_EARLY and gl_INIT, being careful to put gl_EARLY before any macro that uses AC_COMPILE_IFELSE. (AC_OUTPUT): Add lib/Makefile and gl-tests/Makefile. Remove m4/Makefile. * Makefile.am (SUBDIRS): Add gnulib/lib and remove m4. Add gnulib/tests early enough that those tests run before any libvirt unit tests. * m4/Makefile.am: Remove file. Not needed. * src/Makefile.am (INCLUDES): Add -I$(top_srcdir)/gnulib/lib -I../gnulib/lib. (LDADDS, libvirt_la_LIBADD): Add ../gnulib/lib/libgnu.la. * src/nodeinfo.c: Include "physmem.h". * qemud/qemud.c, src/remote_internal.c: Include "getaddrinfo.h". (MEMINFO_PATH, linuxNodeInfoMemPopulate): Remove definitions. (virNodeInfoPopulate): Use physmem_total, not linuxNodeInfoMemPopulate. * tests/Makefile.am (INCLUDES): Add -I$(top_srcdir)/gnulib/lib -I../gnulib/lib. (LDADDS): Add ../gnulib/lib/libgnu.la. * qemud/Makefile.am (libvirtd_LDADD): Add ../gnulib/lib/libgnu.la. * tests/nodeinfotest.c (linuxTestCompareFiles): No longer read total memory from a file. Update expected output not to include "Memory: NNNN" * tests/nodeinfodata/linux-nodeinfo-1.txt: * tests/nodeinfodata/linux-nodeinfo-2.txt: * tests/nodeinfodata/linux-nodeinfo-3.txt: * tests/nodeinfodata/linux-nodeinfo-4.txt: * tests/nodeinfodata/linux-nodeinfo-5.txt: * tests/nodeinfodata/linux-nodeinfo-6.txt: * src/test.c [WITH_TEST]: Remove definition of _GNU_SOURCE that would conflict with the one now in "config.h". * autogen.sh: Add -I gnulib/m4. * src/conf.c, src/sexpr.c: Don't define _GNU_SOURCE. Instead, include "config.h". * qemud/qemud.c: Remove definition of _GNU_SOURCE. * src/openvz_driver.c: Likewise. * src/qemu_driver.c: Likewise. * src/remote_internal.c: Likewise. * configure.in: Use AC_CONFIG_AUX_DIR(build-aux), so that a bunch of gettextize-generated files go into build-aux/, rather than in the top-level directory. * .cvsignore: Adjust. * build-aux/.cvsignore: New file. Author: Jim Meyering <meyering@redhat.com>
-
由 Daniel P. Berrange 提交于
-
- 05 12月, 2007 1 次提交
-
-
由 Richard W.M. Jones 提交于
* python/libvir.c, python/libvirt_wrap.h, qemud/qemud.c, qemud/remote.c, src/internal.h, src/openvz_conf.c, src/openvz_driver.c, src/proxy_internal.h, src/qemu_conf.c, src/qemu_driver.c, src/remote_internal.h, src/test.h, src/util.c, src/xen_unified.c, src/xen_unified.h, tests/nodeinfotest.c, tests/qemuxml2argvtest.c, tests/qemuxml2xmltest.c, tests/reconnect.c, tests/sexpr2xmltest.c, tests/virshtest.c, tests/xencapstest.c, tests/xmconfigtest.c, tests/xml2sexprtest.c: Change #include <> to #include "" for local includes. Removed many includes from src/internal.h and put them in the C files which actually use them. Removed <ansidecl.h> - unused. Added a comment around __func__. Removed a clashing redefinition of VERSION symbol. All limits (PATH_MAX etc) now done in src/internal.h, so we don't need to include those headers in other files.
-
- 03 12月, 2007 1 次提交
-
-
由 Daniel P. Berrange 提交于
-
- 01 12月, 2007 1 次提交
-
-
由 Daniel P. Berrange 提交于
-
- 26 11月, 2007 1 次提交
-
-
由 Richard W.M. Jones 提交于
* src/bridge.c, src/bridge.h, src/qemu_conf.c, src/qemu_conf.h, src/qemu_driver.c, src/qemu_driver.h, src/test.c: Disable more of qemu if configured --without-qemu.
-
- 21 11月, 2007 1 次提交
-
-
由 Richard W.M. Jones 提交于
* src/bridge.c, src/qemu_driver.c: Incorrect call to brSetForwardDelay changed to brSetEnableSTP.
-
- 16 11月, 2007 1 次提交
-
-
由 Richard W.M. Jones 提交于
* src/stats_linux.c: Fix parsing of short interface names occurring in the /proc/net/dev file. * src/qemu_driver.c: Collect interface stats for QEMU & KVM domains.
-
- 14 11月, 2007 1 次提交
-
-
由 Richard W.M. Jones 提交于
* src/libvirt.c and all internal driver interfaces: Parse the URI only once and pass it to virDrvOpen instead of the unparsed name string.
-
- 27 10月, 2007 3 次提交
-
-
由 Daniel P. Berrange 提交于
-
由 Daniel P. Berrange 提交于
-
由 Daniel P. Berrange 提交于
-
- 13 10月, 2007 1 次提交
-
-
由 Daniel P. Berrange 提交于
-
- 11 10月, 2007 1 次提交
-
-
由 Daniel P. Berrange 提交于
-
- 30 9月, 2007 1 次提交
-
-
由 Daniel Veillard 提交于
src/driver.h src/libvirt.c src/openvz_driver.c src/qemu_driver.c src/test.c src/xen_unified.c src/xend_internal.c: add new API virNodeGetFreeMemory(), extends the driver. Lacks remote and QEmu support though. * src/libvirt.c: allows to fix virNodeGetCellsFreeMemory() adding parameter check for startCell. * proxy/libvirt_proxy.c src/xend_internal.[ch] include/libvirt/libvirt.h include/libvirt/libvirt.h.in: applied vncpasswd dump patch from Mark Johnson but with the virDomainXMLFlags extension as suggested by Daniel Berrange this changed a couple of internal APIs too * tests/sexpr2xmldata/sexpr2xml-no-source-cdrom.xml: fix one of the tests affected by bootloader dump change. Daniel
-
- 28 9月, 2007 1 次提交
-
-
由 Daniel Veillard 提交于
src/qemu_driver.c src/remote_internal.c src/test.c src/xen_internal.[ch] src/xen_unified.c src/xend_internal.[ch] src/libvirt.c src/libvirt_sym.version: adding NUMA support patches from Beth Kon adding new virNodeGetCellsFreeMemory entry point and extending the virConnectGetCapabilities one. Fix a couple of issues in the patch and add to exported symbols from shared lib. * docs/virsh.pod docs/virsh.1 src/virsh.c: added new command freecell to get the available memory on the node or in a NUMA cell. * docs/*: updated and regenerated the documentation Daniel
-
- 22 9月, 2007 1 次提交
-
-
由 Daniel P. Berrange 提交于
-
- 21 9月, 2007 2 次提交
-
-
由 Richard W.M. Jones 提交于
* src/bridge.c, src/qemu_driver.c, configure.in: Try to detect the paths of dnsmasq and brctl at compile time. If found then compile them in, otherwise search $PATH at runtime. * libvirt.spec.in: BR dnsmasq and bridge-utils so we have their paths at compile time.
-
由 Richard W.M. Jones 提交于
* src/qemu_driver.c, docs/libvir.html: Support virConnectGetHostname and virConnectGetURI for qemu driver.
-
- 21 8月, 2007 3 次提交
-
-
由 Richard W.M. Jones 提交于
* src/libvirt.c (virDomainBlockStats, virDomainInterfaceStats): Added block device and network interface statistics. * src/xen_internal.c: Support for stats from Xen domains. * qemud/remote.c, qemud/remote_protocol.x, qemud/remote_internal.c: Support for fetching device and network interface stats across remote connections. * src/virsh.c: Added 'virsh domblkstat' and 'virsh domifstat' commands to display stats. * docs/libvir.html, docs/hvsupport.html: Updated hvsupport documentation.
-
由 Richard W.M. Jones 提交于
* src/libvirt.c (virDomainMigrate): Added virDomainMigrate API call. * src/xend_internal.c, src/xen_unified.c: Support for migration of Xen domains. * src/xen_internal.c: Xen capabilities indicates level of support for migration. * qemud/remote.c, qemud/remote_protocol.x, src/remote_internal.c: Support for migration between remote hypervisors. * src/virsh.c: Added 'virsh migrate' command. * docs/libvir.html, docs/hvsupport.html: Updated hvsupport documentation.
-
由 Richard W.M. Jones 提交于
* qemud/remote.c, qemud/remote_protocol.x, src/driver.h, src/internal.h, src/libvirt.c, src/libvirt_sym.version, src/qemu_driver.c, src/remote_internal.c, src/test.c: Add a private interface so that libvirt.c coordination functions can detect the availability of features in underlying drivers, using the VIR_DRV_SUPPORTS_FEATURE macro.
-
- 14 8月, 2007 5 次提交
-
-
由 Daniel P. Berrange 提交于
-
由 Daniel P. Berrange 提交于
-
由 Daniel P. Berrange 提交于
-
由 Daniel P. Berrange 提交于
-
由 Daniel P. Berrange 提交于
-