- 25 2月, 2013 13 次提交
-
-
由 Peter Krempa 提交于
This patch implements support for the virtio-rng-pci device and the rng-random backend in qemu. Two capabilities bits are added to track support for those: QEMU_CAPS_DEVICE_VIRTIO_RNG - for the device support and QEMU_CAPS_OBJECT_RNG_RANDOM - for the backend support. qemu is invoked with these additional parameters if the device is enabled: -object rng-random,id=rng0,filename=/test/phile (to add the backend) -device virtio-rng-pci,rng=rng0,bus=pci.0,addr=0x4 (to add the device)
-
由 Peter Krempa 提交于
-
由 Peter Krempa 提交于
This patch adds basic configuration support for the RNG device supporting the virtio model with the "random" and "egd" backend types as described in the schema in the previous patch.
-
由 Peter Krempa 提交于
This patch documents XML elements used for (basic) support of virtual RNG devices. In the devices section in the domain XML users may specify: For the default 'random' backend: <devices> <rng model='virtio'> <backend model='random'>/dev/urandom</backend> </rng> </devices> For the slightly more advanced EGD backend: <devices> <rng model='virtio'> <backend model='egd' type='udp'> <!-- this is a definition of a character device --> <source mode='bind' service='1234'/> <source mode='connect' host='1.2.3.4' service='1234'/> <!-- or other valid character device configuration --> </backend> </rng> </devices> For the planned random daemon/pool: <devices> <rng model='virtio'> <backend model='pool' pool='poolname'>class</backend> </rng> </devices> to enable the RNG device for guests.
-
由 Peter Krempa 提交于
This patch adds a fake switch statement to force the compiler to warn after a new device type was added. This should remind the contributor to add the new device also to this iterator function.
-
由 Gene Czarcinski 提交于
Originally, only a host name was used to associate a DHCPv6 request with a specific IPv6 address. Further testing demonstrates that this is an unreliable method and, instead, a client-id or DUID needs to be used. According to DHCPv6 standards, this id can be a duid-LLT, duid-LL, or duid-UUID even though dnsmasq will accept almost any text string. Although validity checking of a specified string makes sure it is hexadecimal notation with bytes separated by colons, there is no rigorous check to make sure it meets the standard. Documentation and schemas have been updated. Signed-off-by: NGene Czarcinski <gene@czarc.net> Signed-off-by: NLaine Stump <laine@laine.org>
-
由 Gene Czarcinski 提交于
Although in IPv4 one must pick either mac or name, either can be omitted. Similarly, for IPv6, the name can be optionally omitted. Signed-off-by: NGene Czarcinski <gene@czarc.net> Signed-off-by: NLaine Stump <laine@laine.org>
-
由 Laine Stump 提交于
-
由 Ján Tomko 提交于
For really old qemu-img binaries which do not support specifying the format of the backing file, display a DEBUG message instead of INFO that this can't be done.
-
由 Ján Tomko 提交于
Modify the expected output of storagevolxml2argv tests as well.
-
由 Ján Tomko 提交于
-
由 Ján Tomko 提交于
This allows us to create a test for the generated command line.
-
由 Ján Tomko 提交于
-
- 24 2月, 2013 1 次提交
-
-
由 Eric Blake 提交于
It makes no sense to prohibit reuse of the wrapper in other LGPL projects, since most of libvirt is designed to be LGPL. Of course, when using the wrapper to wrap a GPL program, the combined result is still effectively GPL, but that shouldn't force us to license the wrapper as GPL in isolation. * run.in: Relicense to LGPLv2+.
-
- 23 2月, 2013 26 次提交
-
-
由 Michal Privoznik 提交于
If a migration fails, we need to stop all block jobs running so qemu doesn't try to send data to destination over and over again.
-
由 Michal Privoznik 提交于
At the end of migration, it is important to stop NBD server and thus release all allocated resources.
-
由 Michal Privoznik 提交于
This function does the source part of NBD magic. It invokes drive-mirror on each non shared and RW disk with a source and wait till the mirroring process completes. When it does we can proceed with migration. Currently, an active waiting is done: every 500ms libvirt asks qemu if block-job is finished or not. However, once the job finishes, qemu doesn't report its progress so we can only assume if the job finished successfully or not. The better solution would be to listen to the event which is sent as soon as the job finishes. The event does contain the result of job.
-
由 Michal Privoznik 提交于
We need to start NBD server and feed it with all non-<shared/>, RW and source-full disks. Moreover, with new virPortAllocator we must ensure the borrowed port for NBD server will be returned if either migration completes or qemu process is torn down.
-
由 Michal Privoznik 提交于
This will be used after all migration work is done to stop NBD server running on destination. It doesn't take any arguments, just issues a command.
-
由 Michal Privoznik 提交于
This will be used with new migration scheme. This patch creates basically just monitor stub functions. Wiring them into something useful is done in later patches.
-
由 Michal Privoznik 提交于
This will be used with new migration scheme. This patch creates basically just monitor stub functions. Wiring them into something useful is done in later patches.
-
由 Michal Privoznik 提交于
This migration cookie is meant for two purposes. The first is to be sent in begin phase from source to destination to let it know we support new implementation of VIR_MIGRATE_NON_SHARED_{DISK,INC} so destination can start NBD server. Then, the second purpose is, destination can let us know, on which port the NBD server is running.
-
由 Michal Privoznik 提交于
This just keeps track whether qemu knows nbd-server-* commands so we can use it during migration or not.
-
由 Pieter Hollants 提交于
This patch adds support for a new <option>-Tag in the <dhcp> block of network configs, based on a subset of the fifth proposal by Laine Stump in the mailing list discussion at https://www.redhat.com/archives/libvir-list/2012-November/msg01054.html. Any such defined option will result in a dhcp-option=<number>,"<value>" statement in the generated dnsmasq configuration file. Currently, DHCP options can be specified by number only and there is no whitelisting or blacklisting of option numbers, which should probably be added. Signed-off-by: NPieter Hollants <pieter@hollants.com> Signed-off-by: NLaine Stump <laine@laine.org>
-
由 Eric Blake 提交于
Nothing in run required bash, except for the shebang. On systems where /bin/bash doesn't exist (I hit it on FreeBSD), using /bin/sh instead fixes a 'make check' failure: gmake[3]: Entering directory `/usr/home/dummy/libvirt/python' GEN check-local /usr/local/bin/bash: ../run: /bin/bash: bad interpreter: No such file or directory * run.in: Use /bin/sh, not bash.
-
由 Sage Weil 提交于
The bfree and blocks fields are supposed to be in units of frsize. We were calculating capacity correctly using those units, but the available calculation was using bsize instead. Most file systems report these as the same value specifically because many programs are buggy, but that is no reason to rely on that behavior, or to behave inconsistently. This bug has been present since e266ded2 (2008) and aa296e6c, when the code was originally introduced (the latter via cut and paste). Signed-off-by: NSage Weil <sage@newdream.net>
-
由 Eric Blake 提交于
On FreeBSD, I got a 'make check' failure: GEN check-symsorting Symbol block at ./libvirt_atomic.syms:4: viratomic.h not found * src/Makefile.am (SYM_FILES): New define. (check-symsorting): Check on all symfiles, even when not used. * src/libvirt_atomic.syms: Fix offender.
-
由 Jiri Denemark 提交于
-
由 Jiri Denemark 提交于
This is a command wrapping virDomainMigrateGetCompressionCache and virDomainMigrateSetCompressionCache.
-
由 Jiri Denemark 提交于
-
由 Jiri Denemark 提交于
-
由 Jiri Denemark 提交于
Introduce virDomainMigrateGetCompressionCache and virDomainMigrateSetCompressionCache APIs.
-
由 Jiri Denemark 提交于
-
由 Jiri Denemark 提交于
As a side effect, this also fixes reporting disk migration process. It was added to memory migration progress, which was wrong. Disk progress has dedicated fields in virDomainJobInfo structure.
-
由 Jiri Denemark 提交于
-
由 Jiri Denemark 提交于
-
由 Jiri Denemark 提交于
remoteDeserializeTypedParameters can now be called with either preallocated params array (size of which is announced by nparams) or it can allocate params array according to the number of parameters received from the server.
-
由 Jiri Denemark 提交于
-
由 Jiri Denemark 提交于
This is an extensible version of virDomainGetJobInfo.
-
由 Jiri Denemark 提交于
-