- 24 6月, 2011 31 次提交
-
-
由 Eric Blake 提交于
This reverts commit d74b86f5. Conflicts: python/generator.py
-
由 Eric Blake 提交于
This reverts commit 12cd77a0. Conflicts: python/libvirt-override-virConnect.py python/libvirt-override.c src/remote/remote_protocol.x
-
由 Eric Blake 提交于
I'm not sure when Py_ssize_t was introduced; but Fedora 14 Python 2.7 has it, while RHEL 5 Python 2.4 lacks it. It should be easy enough to adjust if someone runs into problems. * python/typewrappers.h (Py_ssize_t): Define for older python.
-
由 Eric Blake 提交于
Use NUMA's older nodemask_t (fixed-size map) rather than the newer 'struct bitmask' (variable-size) in order to still compile on RHEL 5, with its numactl-devel-0.9.8. * src/qemu/qemu_process.c [HAVE_NUMA]: Prefer back-compat mode. (qemuProcessInitNumaMemoryPolicy): Use older nodemask_t.
-
由 Minoru Usui 提交于
* src/util/sysinfo.[ch]: also parse and save all the SMBIOS informations about memory modules
-
由 Minoru Usui 提交于
* src/util/sysinfo.c: add parsing and formatting of processor information data
-
由 Minoru Usui 提交于
* src/util/sysinfo.c: Separate BIOSInfo and SystemInfo part from virSysinfoRead()
-
由 Daniel P. Berrange 提交于
To ensure virnetprotocol.[ch] are generated before any other files, add them to BUILT_SOURCES and MAINTAINERCLEANFILES. At the same time, move ESX_DRIVER_GENERATED out of DISTCLEAN and into MAINTAINERCLEANFILES, since they are included in EXTRA_DIST * src/Makefile.am: Add virnetprotocol.[ch] to BUILT_SOURCES
-
由 Eric Blake 提交于
* src/xenxs/xen_sxpr.c (xenParseSxprPCI): Comment fix. * tests/object-locking.ml (driverTables): Likewise. * tests/testutils.c (virtTestDifferenceBin): Likewise.
-
由 Daniel P. Berrange 提交于
The Makefile.am rules for generating RPC protocol had a couple of bugs - A instance of remote/rpcgen_fix.pl was not changed to rpc/genprotocol.pl - A dep from rpc/virnetmessage.h on the generated rpc/virnetprotocol.h was missing - The generated rpc/virnetprotocol.[ch] were not listed in MAINTAINERCLEANFILES * Makefile.am: Fix RPC protocol generation
-
由 Daniel P. Berrange 提交于
* src/qemu/qemu_process.c: Add missing _(...)
-
由 Daniel P. Berrange 提交于
The qemuMigrationPrepareDirect/PrepareTunnel methods accidentally set the domain job to QEMU_JOB_MIGRATION_OUT when it should have been QEMU_JOB_MIGRATION_IN. This didn't have any ill-effect, but it is none-the-less wrong. * src/qemu/qemu_migration.c: Fix job type
-
由 Daniel P. Berrange 提交于
The code emitting taint warnings was mistakenly thinking that guests run from the QEMU session driver were tainted for having high privileges. This is of course nonsense since the session driver is always unprivileged * src/qemu/qemu_domain.c: Don't warn for high privileges in non-privileged QEMU
-
由 Daniel P. Berrange 提交于
If an application is using libvirt + KVM as a piece of its internal infrastructure to perform a specific task, it can be desirable to guarentee the VM dies when the virConnectPtr disconnects from libvirtd. This ensures the app can't leak any VMs it was using. Adding VIR_DOMAIN_START_AUTOKILL as a flag when starting guests enables this to be done. * include/libvirt/libvirt.h.in: All VIR_DOMAIN_START_AUTOKILL * src/qemu/qemu_driver.c: Support automatic killing of guests upon connection close * tools/virsh.c: Add --autokill flag to 'start' and 'create' commands
-
由 Daniel P. Berrange 提交于
Migration is a multi-step process 1. Begin(src) 2. Prepare(dst) 3. Perform(src) 4. Finish(dst) 5. Confirm(src) At step 2, a QEMU process is lauched in the destination to accept the incoming migration. Occasionally the process that is controlling the migration workflow aborts, and fails to call step 4, Finish. This leaves a QEMU process running on the target (albeit with paused CPUs). Unfortunately because step 2 actives a job on the QEMU process, it is unkillable by normal means. By registering the VM for autokill against the src virConnectPtr in step 2, we can ensure that the guest is forcefully killed off if the connection is closed without step 4 being invoked * src/qemu/qemu_migration.c: Register autokill in PrepareDirect and PrepareTunnel. Unregister autokill on successful run of Finish * src/qemu/qemu_process.c: Unregister autokill when stopping a process
-
由 Daniel P. Berrange 提交于
Sometimes it is useful to be able to automatically destroy a guest when a connection is closed. For example, kill an incoming migration if the client managing the migration dies. This introduces a map between guest 'uuid' strings and virConnectPtr objects. When a connection is closed, any associated guests are killed off. * src/qemu/qemu_conf.h: Add autokill hash table to qemu driver * src/qemu/qemu_process.c, src/qemu/qemu_process.h: Add APIs for performing autokill of guests associated with a connection * src/qemu/qemu_driver.c: Initialize autodestroy map
-
由 Daniel P. Berrange 提交于
For controlled shutdown we issue a 'system_powerdown' command to the QEMU monitor. This triggers an ACPI event which (most) guest OS wire up to a controlled shutdown. There is no equiv ACPI event to trigger a controlled reboot. This patch attempts to fake a reboot. - In qemuDomainObjPrivatePtr we have a bool fakeReboot flag. - The virDomainReboot method sets this flag and then triggers a normal 'system_powerdown'. - The QEMU process is started with '-no-shutdown' so that the guest CPUs pause when it powers off the guest - When we receive the 'POWEROFF' event from QEMU JSON monitor if fakeReboot is not set we invoke the qemuProcessKill command and shutdown continues normally - If fakeReboot was set, we spawn a background thread which issues 'system_reset' to perform a warm reboot of the guest hardware. Then it issues 'cont' to start the CPUs again * src/qemu/qemu_command.c: Add -no-shutdown flag if we have JSON support * src/qemu/qemu_domain.h: Add 'fakeReboot' flag to qemuDomainObjPrivate struct * src/qemu/qemu_driver.c: Fake reboot using the system_powerdown command if JSON support is available * src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h, src/qemu/qemu_monitor_json.c, src/qemu/qemu_monitor_json.h, src/qemu/qemu_monitor_text.c, src/qemu/qemu_monitor_text.h: Add binding for system_reset command * src/qemu/qemu_process.c: Reset the guest & start CPUs if fakeReboot is set
-
由 Daniel P. Berrange 提交于
Move the daemon/remote_generator.pl to src/rpc/gendispatch.pl and move the src/remote/rpcgen_fix.pl to src/rpc/genprotocol.pl * daemon/Makefile.am: Update for new name/location of generator * src/Makefile.am: Update for new name/location of generator
-
由 Daniel P. Berrange 提交于
To facilitate creation of new clients using XDR RPC services, pull alot of the remote driver code into a set of reusable objects. - virNetClient: Encapsulates a socket connection to a remote RPC server. Handles all the network I/O for reading/writing RPC messages. Delegates RPC encoding and decoding to the registered programs - virNetClientProgram: Handles processing and dispatch of RPC messages for a single RPC (program,version). A program can register to receive async events from a client - virNetClientStream: Handles generic I/O stream integration to RPC layer Each new client program now merely needs to define the list of RPC procedures & events it wants and their handlers. It does not need to deal with any of the network I/O functionality at all.
-
由 Daniel P. Berrange 提交于
Allow RPC servers to advertise themselves using MDNS, via Avahi * src/rpc/virnetserver.c, src/rpc/virnetserver.h: Allow registration of MDNS services via avahi * src/rpc/virnetserverservice.c, src/rpc/virnetserverservice.h: Add API to fetch the listen port number * src/rpc/virnetsocket.c, src/rpc/virnetsocket.h: Add API to fetch the local port number * src/rpc/virnetservermdns.c, src/rpc/virnetservermdns.h: Represent an MDNS advertisement
-
由 Daniel P. Berrange 提交于
To facilitate creation of new daemons providing XDR RPC services, pull a lot of the libvirtd daemon code into a set of reusable objects. * virNetServer: A server contains one or more services which accept incoming clients. It maintains the list of active clients. It has a list of RPC programs which can be used by clients. When clients produce a complete RPC message, the server passes this onto the corresponding program for handling, and queues any response back with the client. * virNetServerClient: Encapsulates a single client connection. All I/O for the client is handled, reading & writing RPC messages. * virNetServerProgram: Handles processing and dispatch of RPC method calls for a single RPC (program,version). Multiple programs can be registered with the server. * virNetServerService: Encapsulates socket(s) listening for new connections. Each service listens on a single host/port, but may have multiple sockets if on a dual IPv4/6 host. Each new daemon now merely has to define the list of RPC procedures & their handlers. It does not need to deal with any network related functionality at all.
-
由 Daniel P. Berrange 提交于
This extends the basic virNetSocket APIs to allow them to have a handle to the TLS/SASL session objects, once established. This ensures that any data reads/writes are automagically passed through the TLS/SASL encryption layers if required. * src/rpc/virnetsocket.c, src/rpc/virnetsocket.h: Wire up SASL/TLS encryption
-
由 Daniel P. Berrange 提交于
This provides two modules for handling SASL * virNetSASLContext provides the process-wide state, currently just a whitelist of usernames on the server and a one time library init call * virNetTLSSession provides the per-connection state, ie the SASL session itself. This also include APIs for providing data encryption/decryption once the session is established * src/Makefile.am: Add to libvirt-net-rpc.la * src/rpc/virnetsaslcontext.c, src/rpc/virnetsaslcontext.h: Generic SASL handling code
-
由 Daniel P. Berrange 提交于
This provides two modules for handling TLS * virNetTLSContext provides the process-wide state, in particular all the x509 credentials, DH params and x509 whitelists * virNetTLSSession provides the per-connection state, ie the TLS session itself. The virNetTLSContext provides APIs for validating a TLS session's x509 credentials. The virNetTLSSession includes APIs for performing the initial TLS handshake and sending/recving encrypted data * src/Makefile.am: Add to libvirt-net-rpc.la * src/rpc/virnettlscontext.c, src/rpc/virnettlscontext.h: Generic TLS handling code
-
由 Daniel P. Berrange 提交于
Introduces a simple wrapper around the raw POSIX sockets APIs and name resolution APIs. Allows for easy creation of client and server sockets with correct usage of name resolution APIs for protocol agnostic socket setup. It can listen for UNIX and TCP stream sockets. It can connect to UNIX, TCP streams directly, or indirectly to UNIX sockets via an SSH tunnel or external command * src/Makefile.am: Add to libvirt-net-rpc.la * src/rpc/virnetsocket.c, src/rpc/virnetsocket.h: Generic sockets APIs * tests/Makefile.am: Add socket test * tests/virnetsockettest.c: New test case * tests/testutils.c: Avoid overriding LIBVIRT_DEBUG settings * tests/ssh.c: Dumb helper program for SSH tunnelling tests
-
由 Daniel P. Berrange 提交于
This provides a new struct that contains a buffer for the RPC message header+payload, as well as a decoded copy of the message header. There is an API for applying a XDR encoding & decoding of the message headers and payloads. There are also APIs for maintaining a simple FIFO queue of message instances. Expected usage scenarios are: To send a message msg = virNetMessageNew() ...fill in msg->header fields.. virNetMessageEncodeHeader(msg) ...loook at msg->header fields to determine payload filter virNetMessageEncodePayload(msg, xdrfilter, data) ...send msg->bufferLength worth of data from buffer To receive a message msg = virNetMessageNew() ...read VIR_NET_MESSAGE_LEN_MAX of data into buffer virNetMessageDecodeLength(msg) ...read msg->bufferLength-msg->bufferOffset of data into buffer virNetMessageDecodeHeader(msg) ...look at msg->header fields to determine payload filter virNetMessageDecodePayload(msg, xdrfilter, data) ...run payload processor * src/Makefile.am: Add to libvirt-net-rpc.la * src/rpc/virnetmessage.c, src/rpc/virnetmessage.h: Internal message handling API. * testutils.c, testutils.h: Helper for printing binary differences * virnetmessagetest.c: Validate all XDR encoding/decoding
-
由 Daniel P. Berrange 提交于
This patch defines the basics of a generic RPC protocol in XDR. This is wire ABI compatible with the original remote_protocol.x. It takes everything except for the RPC calls / events from that protocol - The basic header virNetMessageHeader (aka remote_message_header) - The error object virNetMessageError (aka remote_error) - Two dummy objects virNetMessageDomain & virNetMessageNetwork sadly needed to keep virNetMessageError ABI compatible with the old remote_error The RPC protocol supports method calls, async events and bidirectional data streams as before * src/Makefile.am: Add rules for generating RPC code from protocol & define a new libvirt-net-rpc.la helper library * src/rpc/virnetprotocol.x: New generic RPC protocol
-
由 Eric Blake 提交于
On RHEL 5, I got: /usr/bin/python ./generator.py /usr/bin/python File "./generator.py", line 427 "virStreamFree", # Needed in custom virStream __del__, but free shouldn't ^ SyntaxError: invalid syntax * python/generator.py (function_skip_python_impl): Use same syntax as other skip lists.
-
由 Eric Blake 提交于
GCC complained about a C99 for-loop declaration outside of C99 mode when compiling on RHEL 5. * src/qemu/qemu_driver.c (qemudDomainPinVcpuFlags): Avoid C99 for loop, since gcc 4.1.2 hates it.
-
由 David S. Wang 提交于
This patch adds documentation about the 802.1Qbh related parameters of the virtualport element for 'direct' interfaces. Signed-off-by: NDavid S. Wang <dwang2@cisco.com> Signed-off-by: NRoopa Prabhu <roprabhu@cisco.com> Signed-off-by: NChristian Benvenuti <benve@cisco.com> Signed-off-by: NVasanthy Kolluri <vkolluri@cisco.com>
-
由 Eric Blake 提交于
Gnulib has been busy, with 397 commits; it's easier to update now even without any known libvirt issue to be fixed, rather than having to analyze an even larger changeset later on. * .gnulib: Update to latest, for lots of changes. * bootstrap: Synchronize to upstream.
-
- 23 6月, 2011 9 次提交
-
-
由 Stefan Berger 提交于
This patch fixes the compilation of netlink.c and interface.c on those systems missing either libnl or that have an older linux/if_link.h include file not supporting macvtap or VF_PORTS. WITH_MACVTAP is '1' if newer include files were detected, '0' otherwise. IFLA_PORT_MAX is defined in linux/if_link.h if yet more functionality is supported.
-
由 Matthias Bolte 提交于
If macvtap is required then libnl has to be available, otherwise libnl is optional.
-
由 Cole Robinson 提交于
Turns out I was right in removing this the first time :) This is needed in our custom __del__ function, but the C code wasn't being generated. Add new infrastructure to do what we want
-
由 Eric Blake 提交于
* cfg.mk (sc_prohibit_setuid) (exclude_file_name_regexp--sc_prohibit_setuid): New rule. (VC_LIST_ALWAYS_EXCLUDE_REGEX): Always exempt po files. (exclude_file_name_regexp--sc_prohibit_asprintf): Simplify. (exclude_file_name_regexp--sc_prohibit_can_not): Drop. (exclude_file_name_regexp--sc_prohibit_doubled_word): Likewise.
-
由 Matthias Bolte 提交于
apibuild.py expects a sentence that starts with "Returns" describing the return value of a function.
-
由 Osier Yang 提交于
-
由 Osier Yang 提交于
Move "VIR_FREE(buf) into label "closelog", so that "buf" could be freed before returning.
-
由 Jiri Denemark 提交于
We only care about NUMA availability if NUMA configuration is requested in domain XML.
-
由 Matthew Booth 提交于
volDelete used to return VIR_ERR_INTERNAL_ERROR when attempting to delete a volume which was still being allocated. It should return VIR_ERR_OPERATION_INVALID. * src/storage/storage_driver.c: Fix return of volDelete.
-