This flag causes virtlockd to use different offset when locking
the file.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

This will help in future expansions of the code when it is be
harder to track if @newName and/or @newLockspace were already
allocated or not and thus whether it is safe to 'return' or we
need to 'goto error'. By using the 'cleanup' label those two
cases merge into a single one.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

If drvNew callback fails, nobody calls drvFree and thus private
data of the driver might leak.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

The if() is completely useless since args.path is set to NULL in
the line just above.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

On daemon deinit only fileLockSpaceDir is freed. The other two
(scsiLockSpaceDir and lvmLockSpaceDir) are missing even though
they are allocated in virLockManagerLockDaemonLoadConfig().
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Replace instances where we previously called virGetLastError just to
either get the code or to check if an error exists with
virGetLastErrorCode to avoid a validity pre-check.
Signed-off-by: NRamy Elkest <ramyelkest@gmail.com>
Reviewed-by: NErik Skultety <eskultet@redhat.com>

Seeing a log message saying 'flags=93' is ambiguous & confusing unless
you happen to know that libvirt always prints flags as hex.  Change our
debug messages so that they always add a '0x' prefix when printing flags,
and '0' prefix when printing mode. A few other misc places gain a '0x'
prefix in error messages too.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

When building with gcc-5 (particularly gcc-5.3.0 now) and having pdwtags
installed (package dwarves) make check fails with the following error:

  $ make lock_protocol-struct
  GEN      lock_protocol-struct
  --- lock_protocol-structs	2016-01-13 15:04:59.318809607 +0100
  +++ lock_protocol-struct-t3	2016-01-13 15:05:17.703501234 +0100
  @@ -26,10 +26,6 @@
           virLockSpaceProtocolNonNullString name;
           u_int                      flags;
   };
  -enum virLockSpaceProtocolAcquireResourceFlags {
  -        VIR_LOCK_SPACE_PROTOCOL_ACQUIRE_RESOURCE_SHARED = 1,
  -        VIR_LOCK_SPACE_PROTOCOL_ACQUIRE_RESOURCE_AUTOCREATE = 2,
  -};
   struct virLockSpaceProtocolAcquireResourceArgs {
           virLockSpaceProtocolNonNullString path;
           virLockSpaceProtocolNonNullString name;
  Makefile:10415: recipe for target 'lock_protocol-struct' failed
  make: *** [lock_protocol-struct] Error 1

That happens because without any specific options gcc doesn't keep enum
information in the resulting binary object.  I managed to isolate the
parameters of gcc that caused this issue to disappear, however I
remember that they influenced the resulting binaries quite a bit and
were definitely not something we would want to add as mandatory to the
build process.

So to deal with this cleanly, let's take that enum and separate it out
to its own header file.  Since it is only used in the lockd driver and
the protocol, lock_driver_lockd.h feels like a suitable name.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Fix memory leaks, failure to restore umask and missing man
page docs.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Some hypervisors like Xen do not have PIDs associated with domains.
Relax the requirement for PID != 0 in the locking code so it can
be used by hypervisors that do not represent domains as a process
running on the host.
Signed-off-by: NJim Fehlig <jfehlig@suse.com>

In the order of appearance:

* MAX_LISTEN - never used
  added by 23ad665c (qemud) and addec57 (lock daemon)

* NEXT_FREE_CLASS_ID - never used, added by 07d1b6b5

* virLockError - never used, added by eb8268a4

* OPENVZ_MAX_ARG, CMDBUF_LEN, CMDOP_LEN
  unused since the removal of ADD_ARG_LIT in d8b31306

* QEMU_NB_PER_CPU_STAT_PARAM - unused since 897808e7

* QEMU_CMD_PROMPT, QEMU_PASSWD_PROMPT - unused since 1dc10a7b

* TEST_MODEL_WORDSIZE - unused since c25c18f7

* TEMPDIR - never used, added by 714bef5b

* NSIG - workaround around old headers
  added by commit 60ed1d2a
  unused since virExec was moved by commit 02e86910

* DO_TEST_PARSE - never used, added by 9afa0060

* DIFF_MSEC, GETTIMEOFDAY - unused since eee6eb66

Commit v1.2.4-52-gda879e59 fixed issues with domains started before
sanlock driver was enabled by checking whether a running domain is
registered with sanlock and if it's not, sanlock driver is basically
ignored for the domain.

However, it was checking this even for domain which has just been
started and no sanlock_* API was called for them yet. This results in

    cmd 9 target pid 2135544 not found

error messages to appear in sanlock.log whenever we start a new domain.

This patch avoids this useless check for freshly started domains.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

virLockManager*New APIs are never called with
VIR_LOCK_MANAGER_USES_STATE. Moreover, lockd driver does not maintain
any state that would need to be transferred during migration and thus it
should not mention VIR_LOCK_MANAGER_USES_STATE at all.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

Not all files we want to find using virFileFindResource{,Full} are
generated when libvirt is built, some of them (such as RNG schemas) are
distributed with sources. The current API was not able to find source
files if libvirt was built in VPATH.

Both RNG schemas and cpu_map.xml are distributed in source tarball.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

https://bugzilla.redhat.com/show_bug.cgi?id=1160995

In our config files users are expected to pass several integer values
for different configuration knobs. However, majority of them expect a
nonnegative number and only a few of them accept a negative number too
(notably keepalive_interval in libvirtd.conf).
Therefore, a new type to config value is introduced: VIR_CONF_ULONG
that is set whenever an integer is positive or zero. With this
approach knobs accepting VIR_CONF_LONG should accept VIR_CONF_ULONG
too.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

C guarantees that static variables are zero-initialized.  Some older
compilers (and also gcc -fno-zero-initialized-in-bss) create larger
binaries if you explicitly zero-initialize a static variable.

* src/conf/nwfilter_conf.c: Fix initialization.
* src/cpu/cpu_x86.c: Likewise.
* src/interface/interface_backend_netcf.c: Likewise.
* src/locking/lock_daemon.c: Likewise.
* src/locking/lock_driver_lockd.c: Likewise.
* src/locking/lock_driver_sanlock.c: Likewise.
* src/network/bridge_driver.c: Likewise.
* src/node_device/node_device_udev.c: Likewise.
* src/nwfilter/nwfilter_learnipaddr.c: Likewise.
* src/rpc/virnetserver.c: Likewise.
* src/security/security_selinux.c
(virSecuritySELinuxGenSecurityLabel): Likewise.
Signed-off-by: NEric Blake <eblake@redhat.com>

On some places in the libvirt code we have:

  f(a,z)

instead of

  f(a, z)

This trivial patch fixes couple of such occurrences.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

In many places we define a variable as a 'const char *' when in fact
we modify it just a few lines below. Or even free it. We should not do
that.

There's one exception though, in xenSessionFree() xenapi_utils.c. We
are freeing the xen_session structure which is defined in
xen/api/xen_common.h public header. The structure contains session_id
which is type of 'const char *' when in fact it should have been just
'char *'. So I'm leaving this unmodified, just noticing the fact in
comment.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Commits e18a80a3 and 57e5c3c2 switched from a getenv wrapper which
does not allocate a string to virFileFindResource which does not,
without freeing it.

https://bugzilla.redhat.com/show_bug.cgi?id=1116427

Make the lock plugin use virFileFindResource to find the
virtlockd daemon path, so that it executes the in-builddir
daemon if run from source tree.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Any source file which calls the logging APIs now needs
to have a VIR_LOG_INIT("source.name") declaration at
the start of the file. This provides a static variable
of the virLogSource type.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Convert the sanlock and lockd lock driver plugins over to use
the new virCryptoHashString APIs instead of having their own
duplicated code.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Most of the usage of getuid()/getgid() is in cases where we are
considering what privileges we have. As such the code should be
using the effective IDs, not real IDs.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Unconditional use of getenv is not secure in setuid env.
While not all libvirt code runs in a setuid env (since
much of it only exists inside libvirtd) this is not always
clear to developers. So make all the code paranoid, even
if it only ever runs inside libvirtd.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Convert the type of loop iterators named 'i', 'j', k',
'ii', 'jj', 'kk', to be 'size_t' instead of 'int' or
'unsigned int', also santizing 'ii', 'jj', 'kk' to use
the normal 'i', 'j', 'k' naming
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

A 'uri' parameter was added for the benefit of sanlock. This
causes a warning in the lockd driver though

2013-05-03 13:20:35.347+0000: 28403: error : virLockManagerLockDaemonNew:482 : internal error Unexpected parameter uri for object

Ignore this parameter, since lockd does not require it and it
is harmless if not used.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

The lockd plugin for the lock manager was not correctly
handling the release of resource locks. This meant that
during migration, or when pausing a VM, the locks would
not get released. This in turn made it impossible to
resume the domain, or finish migration

The source code base needs to be adapted as well. Some files
include virutil.h just for the string related functions (here,
the include is substituted to match the new file), some include
virutil.h without any need (here, the include is removed), and
some require both.