Commit f1a89a8b allowed parsing configs from /etc/libvirt
without validating the emulator capabilities.

Check for the presence of a machine type in the qemu driver's
post parse function instead of crashing.

https://bugzilla.redhat.com/show_bug.cgi?id=1267256

Check if we correctly parse the persistent config even with
the VIR_DOMAIN_DEF_PARSE_SKIP_OSTYPE_CHECKS flag.

Revert commit 55e6d8cd.

This fix for https://bugzilla.redhat.com/show_bug.cgi?id=1267256
unconditionally required a machine type for all machine types
even though qemu is the only emulator using them.

Revert it to fix persistent configs for drivers with no machine type:
https://www.redhat.com/archives/libvir-list/2016-February/msg01228.html

Allow testing XML parsing with different flags.

libxlMakeNic opens a virConnect object and takes a reference on a
virNetwork object, but doesn't drop the references on all error
paths. Rework the function to follow the standard libvirt pattern
of using a local 'ret' variable to hold the function return value,
performing all cleanup and returning 'ret' at a 'cleanup' label.

Generates a false positive for Coverity, but it turns out there's no need
to check ret == -1 since if VIR_APPEND_ELEMENT is successful, the local
vol pointer is cleared anyway.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Found by my Coverity checker - virCheckFlags call could return -1, but
not virCommandFree(destroy_cmd).
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

When parsing the barrier:limit values, use virStringSplitCount in order
to split the pair and make the approriate checks to get the data.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

The virHostdevIsVirtualFunction() was called exactly twice, and in
both cases the return value was saved to a temporary variable before
being checked. This would be okay if it improved readability, but in
this case is pretty pointless.

Get rid of the temporary variable and check the return value
directly; while at it, change the check from '<= 0' to '!= 1' to
align it with the way other similar *IsVirtualFunction() functions
are used thorough the code.

virNetDevIsVirtualFunction() returns 1 if the interface is a
virtual function, 0 if it isn't and -1 on error. This means that,
despite the name suggesting otherwise, using it as a predicate is
not correct.

Fix two callers that were doing so adding an explicit check on
the return value.

Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

There's been a report on the upstream list [1] describing we
access /sys/devices/system/cpu/present directly on the host from
within our test suite. This may end up in unpredictable results
as no all linux systems are required to have that file. Mock
access to the file.

libvirt.git/tests $ ../run strace vircgrouptest
...
access("/sys/devices/system/cpu/present", F_OK) = 0
...
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

RHBZ: https://bugzilla.redhat.com/show_bug.cgi?id=1298070

The corresponding chardev must be attached first, otherwise the
the qemu command line won't be complete (missing the host part),

Yet again, selinux has been adding const-correctness; this change
is ABI-compatible, but breaks API, which affects us when we try to
override things in our testsuite:

../../tests/securityselinuxhelper.c:307:24: error: conflicting types for 'selabel_open'
 struct selabel_handle *selabel_open(unsigned int backend,
                        ^~~~~~~~~~~~
In file included from ../../tests/securityselinuxhelper.c:32:0:
/usr/include/selinux/label.h:73:24: note: previous declaration of 'selabel_open' was here

The problem is a new 'const' prior to the second parameter.

Fix it the same way we did in commit 292d3f2d: check for the new
const at configure time.
Signed-off-by: NEric Blake <eblake@redhat.com>

Introduce support for domainInterfaceStats API call for querying
network interface statistics. Consequently it also enables the use of
`virsh domifstat <dom> <interface name>` command plus seeing the
interfaces names instead of "-" when doing `virsh domiflist <dom>`.

After successful guest creation we fill the network interfaces names
based on domain, device id and append suffix if it's emulated in the
following form: vif<domid>.<devid>[-emu].  We extract the network
interfaces info from the libxl_domain_config object in
libxlDomainCreateIfaceNames() to generate ifname. On domain cleanup we
also clear ifname, in case it was set by libvirt (i.e. being prefixed
with "vif"). We also skip these two steps in case the name of the
interface was manually inserted by the administrator. Since the
introduction of netprefix (commit a040ba9e), ifnames with a registered
prefix will be freed on virDomain{Obj,Def}Format*, thus eliminating
the migration issues observed with the reverted commit d2e5538b whereas
source and destination would have the same ifname.

For getting the interface statistics we resort to virNetInterfaceStats
and let libvirt handle the platform specific nits. Note that the
latter is not yet supported in FreeBSD.
Signed-off-by: NJoao Martins <joao.m.martins@oracle.com>

Signed-off-by: NChunyan Liu <cyliu@suse.com>

%zu is not always synonymous with uint64_t; on 32-bit machines,
size_t is only 32 bits.  Prefer "%lld"/'unsigned long long' when
the variable is under our control, and "%"PRIu64 when we are
stuck with 'uint64_t' from RBD.

Fixes errors such as:

../../src/storage/storage_backend_rbd.c: In function 'virStorageBackendRBDVolWipe':
../../src/storage/storage_backend_rbd.c:1281:15: error: format '%zu' expects argument of type 'size_t', but argument 8 has type 'uint64_t {aka long long unsigned int}' [-Werror=format=]
     VIR_DEBUG("Need to wipe %zu bytes from RBD image %s/%s",
               ^
../../src/util/virlog.h:90:73: note: in definition of macro 'VIR_DEBUG_INT'
     virLogMessage(src, VIR_LOG_DEBUG, filename, linenr, funcname, NULL, __VA_ARGS__)
                                                                         ^
../../src/storage/storage_backend_rbd.c:1281:5: note: in expansion of macro 'VIR_DEBUG'
     VIR_DEBUG("Need to wipe %zu bytes from RBD image %s/%s",
     ^
Signed-off-by: NEric Blake <eblake@redhat.com>

There's this check when building command line that whenever
domain has no graphics card configured we put -nographics onto
qemu command line. The check is 'if (!def->graphics)'. This
makes coverity think that def->graphics can be NULL, which is
true. But later in the code every access to def->graphics is
guarded by check for def->ngraphics, so no crash occurs. But this
is something that coverity fails to deduct.
In order to shut coverity up lets change the condition to
'if (!def->ngraphics)'.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

After 6604a3dd in which new helper function has been
introduced, the code calls virStringReplace and dereference the
result immediately. The string function can, however, return NULL
so this would SIGSEGV right away. Check for the return value of
the string function.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

After 457ff97f there are two defects in our code. In both of
them we use a signed variable to hold up a number of snapshots
that domain has. We use a helper function to count the number.
However, the helper function may fail in which case it returns
a negative one and control jumps to cleanup label where an
unsigned variable is used to iterate over array of snapshots. The
loop condition thus compare signed and unsigned variables which
in this specific case ends up badly for us.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Imagine you have partially installed libvirt, or maybe you're
just running 'make uninstall' from a different version than 'make
install' has been ran. One way or another, we are doing plain
'rm' instead of 'rm -f' and thus not trying hard enough when
uninstalling. In the rest of our code we stick with -f switch. Do
that for docs too.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

No functional changes.

xl/libxl already supports qemu's network-based block backends
such as nbd and rbd. libvirt has supported configuring such
<disk>s for long time too. This patch adds support for rbd
disks in the libxl driver by generating a rbd device URL from
the virDomainDiskDef object. The URL is passed to libxl via the
pdev_path field of libxl_device_disk struct. libxl then passes
the URL to qemu for cosumption by the rbd backend.
Signed-off-by: NJim Fehlig <jfehlig@suse.com>

The target= setting in xl disk configuration can be used to encode
meta info that is meaningful to a backend. Leverage this fact to
support qdisk network disk types such as rbd. E.g. <disk> config
such as

   <disk type='network' device='disk'>
     <driver name='qemu' type='raw'/>
     <source protocol='rbd' name='pool/image'>
       <host name='mon1.example.org' port='6321'/>
       <host name='mon2.example.org' port='6322'/>
       <host name='mon3.example.org' port='6322'/>
     </source>
     <target dev='hdb' bus='ide'/>
     <address type='drive' controller='0' bus='0' target='0' unit='1'/>
   </disk>

can be converted to the following xl config (and vice versa)

  disk = [ "format=raw,vdev=hdb,access=rw,backendtype=qdisk,
            target=rbd:pool/image:auth_supported=none:mon_host=mon1.example.org\\:6321\\;mon2.example.org\\:6322\\;mon3.example.org\\:6322"
         ]

Note that in xl disk config, a literal backslash in target= must
be escaped with a backslash. Conversion of <auth> config is not
handled in this patch, but can be done in a follow-up patch.

Also add a test for the conversions.
Signed-off-by: NJim Fehlig <jfehlig@suse.com>

The most formal form of xl disk configuration uses key=value
syntax to define each configuration item, e.g.

format=raw, vdev=xvda, access=rw, backendtype=phy, target=disksrc

Change the xl disk formatter to produce this syntax, which allows
target= to contain meta info needed to setup a network-based
disksrc (e.g. rbd, nbd, iscsi). For details on xl disk config
format, see  $xen-src/docs/misc/xl-disk-configuration.txt

Update the disk config in the tests to use the formal syntax.
But add tests to ensure disks specified with the positional
parameter syntax are correctly converted to <disk> XML.
Signed-off-by: NJim Fehlig <jfehlig@suse.com>

While at it, improve a few comments. No functional change.
Signed-off-by: NJim Fehlig <jfehlig@suse.com>

Mostly labels names and whitespace.

No functional changes.

Since we have the macro there's no need for us to unwind it by
hand and check for mutually exclusive flags ourselves.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

We have macros that check and reject mutually exclusive
parameters to our commands. Use those instead of if-else tree.
At the same time, the variable @current becomes useless therefore
it is dropped.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

It may be useful in some cases to call TristateSwitch helper with TristateBool.
Document that enum values equivalency in the code.
Signed-off-by: NMarc-André Lureau <marcandre.lureau@redhat.com>

In case you will specify graphics like this:

<graphics type='spice' port='-1'/>

or

<graphics type='spice' port='-1' tlsPort='6000'/>

libvirt will automatically add autoport='no'.  This leads to an issue
that in qemuProcessStop() we don't release that port because we are
releasing both port if autoport=yes or only port marked as reserved.

If autoport=no but we request to generate port via '-1' we need to mark
that port as reserved in order to release it.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1299696Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

Checking whether x > 0 before looping over [0..x] items doesn't make
sense and multi-line body must have curly brackets around it.

Best viewed with '-w'.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

This does nothing more than adding the new device and capability.
The device is present since QEMU 2.6.0.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

There's a check if a domain definition has any graphics card and
if so, we iterate over each one of them. This makes no sense,
because even if it has none we can still iterate over.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

When getting a list of servers registered for a daemon, it's
returned as a dynamically allocated array filled in with pointers
to constant strings. Because the array is dynamic, it should be
freed when no longer needed (but not the strings!). Even the
function that creates the array suggests that.

==19446== 48 bytes in 3 blocks are definitely lost in loss record 821 of 1,034
==19446==    at 0x4C2C28E: realloc (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
==19446==    by 0x54BAFC8: virReallocN (viralloc.c:245)
==19446==    by 0x54BB0BE: virExpandN (viralloc.c:294)
==19446==    by 0x54BB391: virInsertElementsN (viralloc.c:436)
==19446==    by 0x164E3D: virNetDaemonGetServerNames (virnetdaemon.c:217)
==19446==    by 0x15616F: adminDaemonListServers (admin_server.c:52)
==19446==    by 0x155B8C: adminDispatchConnectListServers (admin.c:151)
==19446==    by 0x155FD8: adminDispatchConnectListServersHelper (admin_dispatch.h:101)
==19446==    by 0x568E862: virNetServerProgramDispatchCall (virnetserverprogram.c:437)
==19446==    by 0x568E3C3: virNetServerProgramDispatch (virnetserverprogram.c:307)
==19446==    by 0x5687B5B: virNetServerProcessMsg (virnetserver.c:135)
==19446==    by 0x5687C1B: virNetServerHandleJob (virnetserver.c:156)
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

GIC v2 is the default, but checking against that specific version when
we want to know whether the default has been selected is potentially
error prone; using an alias instead makes it safer.

Recent changes to the handling of GIC version, specifically commit
2a7b11ea, have clearly defined what values are acceptable for the
version attribute of the <gic> element. Update the documentation
accordingly.