- 24 7月, 2010 1 次提交
-
-
由 Chris Lalancette 提交于
Add the library entry point for the new virDomainQemuMonitorCommand() entry point. Because this is not part of the "normal" libvirt API, it gets its own header file, library file, and will eventually get its own over-the-wire protocol later in the series. Changes since v1: - Go back to using the virDriver table for qemuDomainMonitorCommand, due to linking issues - Added versioning information to the libvirt-qemu.so Changes since v2: - None Changes since v3: - Add LGPL header to libvirt-qemu.c - Make virLibConnError and virLibDomainError macros instead of function calls Changes since v4: - Move exported symbols to libvirt_qemu.syms Signed-off-by: NChris Lalancette <clalance@redhat.com>
-
- 29 6月, 2010 1 次提交
-
-
由 Ryota Ozaki 提交于
Because tty path is unexpectedly not saved in the live configuration file of a domain, libvirtd cannot get the console of the domain back after restarting. The reason why the tty path isn't saved is that, to save the tty path, the save function, virDomainSaveConfig, requires that the target domain is running (pid != -1), however, lxc driver calls the function before starting the domain to pass the configuration to controller. To ensure to save the tty path, the patch lets lxc driver call the save function again after starting the domain.
-
- 15 6月, 2010 2 次提交
-
-
由 Eric Blake 提交于
* src/esx/esx_driver.c (esxDomainCreate): Move guts... (esxDomainCreateWithFlags): ...to new function. (esxDriver): Trivially support the new API. * src/lxc/lxc_driver.c (lxcDomainStart, lxcDomainStartWithFlags) (lxcDriver): Likewise. * src/opennebula/one_driver.c (oneDomainStart) (oneDomainStartWithFlags, oneDriver): Likewise. * src/openvz/openvz_driver.c (openvzDomainCreate) (openvzDomainCreateWithFlags, openvzDriver): Likewise. * src/qemu/qemu_driver.c (qemudDomainStart) (qemudDomainStartWithFlags, qemuDriver): Likewise. * src/test/test_driver.c (testDomainCreate) (testDomainCreateWithFlags, testDriver): Likewise. * src/uml/uml_driver.c (umlDomainStart, umlDomainStartWithFlags) (umlDriver): Likewise. * src/vbox/vbox_tmpl.c (vboxDomainCreate) (vboxDomainCreateWithFlags, Driver): Likewise. * src/xen/xen_driver.c (xenUnifiedDomainCreate) (xenUnifiedDomainCreateWithFlags, xenUnifiedDriver): Likewise. * src/xenapi/xenapi_driver.c (xenapiDomainCreate) (xenapiDomainCreateWithFlags, xenapiDriver): Likewise.
-
由 Eric Blake 提交于
Persistent domain creation needs the same features as transient domains, but virDomainCreate lacks the flags argument present in virDomainCreateXML. virDomainCreateFlags is already claimed as a public enum, so we have to break convention and expose virDomainCreateWithFlags. * include/libvirt/libvirt.h.in (virDomainCreateWithFlags): Add. * src/driver.h (virDrvDomainCreateWithFlags): Internal API. * src/libvirt.c (virDomainCreateWithFlags): Glue public API to driver API. * src/libvirt_public.syms (LIBVIRT_0.8.2): Expose public API. * src/esx/esx_driver.c (esxDriver): Add stub for driver. * src/lxc/lxc_driver.c (lxcDriver): Likewise. * src/opennebula/one_driver.c (oneDriver): Likewise. * src/openvz/openvz_driver.c (openvzDriver): Likewise. * src/phyp/phyp_driver.c (phypDriver): Likewise. * src/qemu/qemu_driver.c (qemuDriver): Likewise. * src/remote/remote_driver.c (remote_driver): Likewise. * src/test/test_driver.c (testDriver): Likewise. * src/uml/uml_driver.c (umlDriver): Likewise. * src/vbox/vbox_tmpl.c (Driver): Likewise. * src/xen/xen_driver.c (xenUnifiedDriver): Likewise. * src/xenapi/xenapi_driver.c (xenapiDriver): Likewise.
-
- 09 6月, 2010 1 次提交
-
-
由 Eric Blake 提交于
* include/libvirt/libvirt.h.in (virDomainCreateFlags): Add VIR_DOMAIN_START_PAUSED. * src/libvirt.c (virDomainCreateXML): Update documentation. * src/lxc/lxc_driver.c (lxcDomainCreateAndStart): Reject new flag as unimplemented. * src/opennebula/one_driver.c (oneDomainCreateAndStart): Likewise. * src/openvz/openvz_driver.c (openvzDomainCreateXML): Likewise. * src/phyp/phyp_driver.c (phypDomainCreateAndStart): Likewise. * src/qemu/qemu_driver.c (qemudDomainCreate): Likewise. * src/test/test_driver.c (testDomainCreateXML): Likewise. * src/uml/uml_driver.c (umlDomainCreate): Likewise. * src/vbox/vbox_tmpl.c (vboxDomainCreateXML): Likewise. * src/xen/xend_internal.c (xenDaemonCreateXML): Likewise. * src/xenapi/xenapi_driver.c (xenapiDomainCreateXML): Likewise.
-
- 25 5月, 2010 1 次提交
-
-
由 Jim Meyering 提交于
* src/lxc/lxc_driver.c (lxcSetSchedulerParameters): Ensure that "->field" is "cpu_shares" before possibly giving a diagnostic about a type for a "cpu_shares" value. Also, virCgroupSetCpuShares could fail without evoking a diagnostic. Add one.
-
- 18 5月, 2010 1 次提交
-
-
由 Jim Meyering 提交于
* src/lxc/lxc_driver.c (lxcFreezeContainer): Remove test-after-deref. Correct indentation in expression.
-
- 04 5月, 2010 3 次提交
-
-
由 Jiri Denemark 提交于
Report VIR_ERR_OPERATION_INVALID when operation which requires running domain is called on inactive domain and vice versa.
-
由 Jiri Denemark 提交于
-
由 Jiri Denemark 提交于
Consistently use virDomainFindByUUID instead of virDomainFindByID and virDomainFindByName and report VIR_ERR_NO_DOMAIN when domain cannot be found.
-
- 03 5月, 2010 1 次提交
-
-
由 Ryota Ozaki 提交于
[Error message] error: Failed to start domain lxc_test1 error: internal error Failed to create veth device pair: 512 The reason of the failure is that lxc driver unexpectedly re-uses an auto-assigned veth name and tries to create the created veth again. The failure will happen when a domain has multiple network interfaces and the names of those are not specified in XML. The patch fixes the problem by resetting buffers of veth names in every iteration of creating veth. * src/lxc/lxc_driver.c: prevent re-using auto-assigned veth name Reported by Kumar L Srikanth-B22348.
-
- 30 4月, 2010 1 次提交
-
-
由 Daniel P. Berrange 提交于
This defines the internal driver API and stubs out each driver * src/driver.h: Define virDrvDomainGetBlockInfo signature * src/libvirt.c, src/libvirt_public.syms: Glue public API to drivers * src/esx/esx_driver.c, src/lxc/lxc_driver.c, src/opennebula/one_driver.c, src/openvz/openvz_driver.c, src/phyp/phyp_driver.c, src/test/test_driver.c, src/uml/uml_driver.c, src/vbox/vbox_tmpl.c, src/xen/xen_driver.c, src/xenapi/xenapi_driver.c: Stub out driver
-
- 06 4月, 2010 2 次提交
-
-
由 Chris Lalancette 提交于
and domainIsPersistent. Signed-off-by: NChris Lalancette <clalance@redhat.com>
-
由 Matthias Bolte 提交于
-
- 05 4月, 2010 1 次提交
-
-
由 Chris Lalancette 提交于
Signed-off-by: NChris Lalancette <clalance@redhat.com>
-
- 04 4月, 2010 1 次提交
-
-
由 Daniel Veillard 提交于
virDomainManagedSave() is to be run on a running domain. Once the call complete, as in virDomainSave() the domain is stopped upon completion, but there is no restore counterpart as any order to start the domain from the API would load the state from the managed file, similary if the domain is autostarted when libvirtd starts. Once a domain has restarted his managed save image is destroyed, basically managed save image can only exist for a stopped domain, for a running domain that would be by definition outdated data. * include/libvirt/libvirt.h.in src/libvirt.c src/libvirt_public.syms: adds the new entry points virDomainManagedSave(), virDomainHasManagedSaveImage() and virDomainManagedSaveRemove() * src/driver.h src/esx/esx_driver.c src/lxc/lxc_driver.c src/opennebula/one_driver.c src/openvz/openvz_driver.c src/phyp/phyp_driver.c src/qemu/qemu_driver.c src/vbox/vbox_tmpl.c src/remote/remote_driver.c src/test/test_driver.c src/uml/uml_driver.c src/xen/xen_driver.c: add corresponding new internal drivers entry points
-
- 01 4月, 2010 1 次提交
-
-
由 Matthias Bolte 提交于
virParseVersionString uses virStrToLong_ui instead of sscanf. This also fixes a bug in the UML driver, that always returned 0 as version number. Introduce STRSKIP to check if a string has a certain prefix and to skip this prefix.
-
- 30 3月, 2010 1 次提交
-
-
由 Daniel Veillard 提交于
Right now this implements only 2 basic hooks: - before the lxc control process is being launched - after the lxc control process is terminated the XML description of the domain is passed to the hook script stdin /etc/libvirt/hook/lxc * src/lxc/lxc_driver.c: implement synchronous script hooks for LXC at domain startup and end
-
- 27 3月, 2010 2 次提交
-
-
由 Jiri Denemark 提交于
When a domain is defined on host1, migrated to host2 and then migrated back to host1, its current configuration would overwrite the libvirtd's in-memory copy of persistent configuration of that domain. This is not desired as we want to preserve the persistent configuration untouched. This patch introduces new 'live' parameter to virDomainAssignDef. Passing 'true' for 'live' means the configuration passed to virDomainAssignDef describes a configuration of live instance of the domain. This applies for saved domains which are being restored or for incoming domains during migration. All callers have been changed to pass the appropriate value.
-
由 Stefan Berger 提交于
To find out where the net type 'direct' needs to be handled I introduced the 'enum virDomainNetType' in the virDomainNetDef structure and let the compiler tell me where the case statement is missing. Then I added the unhandled device statement to the UML driver. * src/conf/domain_conf.h: change _virDomainNetDef type from int to virDomainNetType enum * src/conf/domain_conf.c src/lxc/lxc_driver.c src/qemu/qemu_conf.c src/uml/uml_conf.c: make sure all enum cases are properly handled in switches
-
- 26 3月, 2010 4 次提交
-
-
由 Daniel P. Berrange 提交于
The current virDomainAttachDevice API can be (ab)used to change the media of an existing CDROM/Floppy device. Going forward there will be more devices that can be configured on the fly and overloading virDomainAttachDevice for this is not too pleasant. This patch adds a new virDomainUpdateDeviceFlags() explicitly just for modifying existing devices. * include/libvirt/libvirt.h.in: Add virDomainUpdateDeviceFlags * src/driver.h: Internal API for virDomainUpdateDeviceFlags * src/libvirt.c, src/libvirt_public.syms: Glue public API to driver API * src/esx/esx_driver.c, src/lxc/lxc_driver.c, src/opennebula/one_driver.c, src/openvz/openvz_driver.c, src/phyp/phyp_driver.c, src/qemu/qemu_driver.c, src/remote/remote_driver.c, src/test/test_driver.c, src/uml/uml_driver.c, src/vbox/vbox_tmpl.c, src/xen/xen_driver.c, src/xenapi/xenapi_driver.c: Add stubs for new driver entry point
-
由 Daniel P. Berrange 提交于
The libvirtd daemon impl will need to switch over to using the new event APIs. To make this simpler, ensure all drivers currently providing events support both the new APIs and old APIs. * src/lxc/lxc_driver.c, src/qemu/qemu_driver.c, src/test/test_driver.c, src/vbox/vbox_tmpl.c, src/xen/xen_driver.c: Implement the new virConnectDomainEvent(Dereg|Reg)isterAny driver entry points
-
由 Daniel P. Berrange 提交于
The internal domain events APIs are designed to handle the lifecycle events. This needs to be refactored to allow arbitrary new event types to be handled. * The signature of virDomainEventDispatchFunc changes to use virConnectDomainEventGenericCallback instead of the lifecycle event specific virConnectDomainEventCallback * Every registered callback gains a unique ID to allow its removal based on ID, instead of function pointer * Every registered callback gains an 'eventID' to allow callbacks for different types of events to be distinguished * virDomainEventDispatch is adapted to filter out callbacks whose eventID does not match the eventID of the event being dispatched * virDomainEventDispatch is adapted to filter based on the domain name and uuid, if this filter is set for a callback. * virDomainEvent type/detail fields are moved into a union to allow different data fields for other types of events to be added later * src/conf/domain_event.h, src/conf/domain_event.c: Refactor to allow handling of different types of events * src/lxc/lxc_driver.c, src/qemu/qemu_driver.c, src/remote/remote_driver.c, src/test/test_driver.c, src/xen/xen_driver.c: Change dispatch function signature to use virConnectDomainEventGenericCallback
-
由 Daniel P. Berrange 提交于
The current API for domain events has a number of problems - Only allows for domain lifecycle change events - Does not allow the same callback to be registered multiple times - Does not allow filtering of events to a specific domain This introduces a new more general purpose domain events API typedef enum { VIR_DOMAIN_EVENT_ID_LIFECYCLE = 0, /* virConnectDomainEventCallback */ ...more events later.. } int virConnectDomainEventRegisterAny(virConnectPtr conn, virDomainPtr dom, /* Optional, to filter */ int eventID, virConnectDomainEventGenericCallback cb, void *opaque, virFreeCallback freecb); int virConnectDomainEventDeregisterAny(virConnectPtr conn, int callbackID); Since different event types can received different data in the callback, the API is defined with a generic callback. Specific events will each have a custom signature for their callback. Thus when registering an event it is neccessary to cast the callback to the generic signature eg int myDomainEventCallback(virConnectPtr conn, virDomainPtr dom, int event, int detail, void *opaque) { ... } virConnectDomainEventRegisterAny(conn, NULL, VIR_DOMAIN_EVENT_ID_LIFECYCLE, VIR_DOMAIN_EVENT_CALLBACK(myDomainEventCallback) NULL, NULL); The VIR_DOMAIN_EVENT_CALLBACK() macro simply does a "bad" cast to the generic signature * include/libvirt/libvirt.h.in: Define new APIs for registering domain events * src/driver.h: Internal driver entry points for new events APIs * src/libvirt.c: Wire up public API to driver API for events APIs * src/libvirt_public.syms: Export new APIs * src/esx/esx_driver.c, src/lxc/lxc_driver.c, src/opennebula/one_driver.c, src/openvz/openvz_driver.c, src/phyp/phyp_driver.c, src/qemu/qemu_driver.c, src/remote/remote_driver.c, src/test/test_driver.c, src/uml/uml_driver.c, src/vbox/vbox_tmpl.c, src/xen/xen_driver.c, src/xenapi/xenapi_driver.c: Stub out new API entries
-
- 22 3月, 2010 1 次提交
-
-
由 Jim Fehlig 提交于
Invoking virDomainSetMemory() on lxc driver results in libvirtd segfault when cgroups has not been configured on the host. Ensure driver->cgroup is non-null before invoking virCgroupForDomain(). To prevent similar segfaults in the future, ensure driver parameter to virCgroupForDomain() is non-null before dereferencing.
-
- 20 3月, 2010 1 次提交
-
-
由 Jiri Denemark 提交于
-
- 03 3月, 2010 2 次提交
-
-
由 Daniel P. Berrange 提交于
This provides the internal glue for the driver API * src/driver.h: Internal API contract * src/libvirt.c, src/libvirt_public.syms: Connect public API to driver API * src/esx/esx_driver.c, src/lxc/lxc_driver.c, src/opennebula/one_driver.c, src/openvz/openvz_driver.c, src/phyp/phyp_driver.c, src/qemu/qemu_driver.c, src/remote/remote_driver.c, src/test/test_driver.c src/uml/uml_driver.c, src/vbox/vbox_tmpl.c, src/xen/xen_driver.c: Stub out entry points
-
由 Daniel P. Berrange 提交于
The internal glue layer for the new pubic API * src/driver.h: Define internal driver API contract * src/libvirt.c, src/libvirt_public.syms: Wire up public API to internal driver API * src/esx/esx_driver.c, src/lxc/lxc_driver.c, src/opennebula/one_driver.c, src/openvz/openvz_driver.c, src/phyp/phyp_driver.c, src/qemu/qemu_driver.c, src/remote/remote_driver.c, src/test/test_driver.c, src/uml/uml_driver.c, src/vbox/vbox_tmpl.c, src/xen/xen_driver.c: Stub new entry point
-
- 13 2月, 2010 1 次提交
-
-
由 Daniel P. Berrange 提交于
If giving a lxc:// URI instead of lxc:/// the open method would crash ona NULL pointer * src/lxc/lxc_driver.c: Cope with a NULL URI path
-
- 12 2月, 2010 1 次提交
-
-
由 Jiri Denemark 提交于
-
- 10 2月, 2010 2 次提交
-
-
由 Daniel P. Berrange 提交于
-
由 Daniel P. Berrange 提交于
-
- 09 2月, 2010 5 次提交
-
-
由 Matthias Bolte 提交于
It was used for error reporting only.
-
由 Matthias Bolte 提交于
It was used for error reporting only.
-
由 Matthias Bolte 提交于
-
由 Matthias Bolte 提交于
-
由 Jim Fehlig 提交于
Implementation of domain{Attach,Detach}DeviceFlags handlers in the drivers.
-
- 21 1月, 2010 1 次提交
-
-
由 Laine Stump 提交于
* src/lxc/lxc_container.c src/lxc/lxc_controller.c src/lxc/lxc_driver.c src/network/bridge_driver.c src/qemu/qemu_driver.c src/uml/uml_driver.c: virFileMakePath returns 0 for success, or the value of errno on failure, so error checking should be to test if non-zero, not if lower than 0
-
- 20 1月, 2010 1 次提交
-
-
由 Jiri Denemark 提交于
I noticed some debug messages are printed with an empty lines after them. This patch removes these empty lines from all invocations of the following macros: VIR_DEBUG VIR_DEBUG0 VIR_ERROR VIR_ERROR0 VIR_INFO VIR_WARN VIR_WARN0 Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
-
- 18 1月, 2010 1 次提交
-
-
由 Jim Meyering 提交于
* src/lxc/lxc_driver.c (lxcSetupInterfaces): Remove always-true array-is-non-NULL test. git grep 'mac\[.*\];'|grep -F .h src/conf/domain_conf.h: unsigned char mac[VIR_MAC_BUFLEN];
-