- 29 4月, 2015 1 次提交
-
-
由 Michael Chapman 提交于
We will want to use synchronous block jobs from qemu_migration as well, so split this function out into a new source file. Signed-off-by: NMichael Chapman <mike@very.puzzling.org>
-
- 27 4月, 2015 1 次提交
-
-
由 Michal Privoznik 提交于
In a lot places we use path like this: $(srcdir)/../src/.... when in fact it can be: $(top_srcdir)/src/ Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
- 24 4月, 2015 2 次提交
-
-
由 Cole Robinson 提交于
Similar to what was done for the channel socket in the previous commit.
-
由 Cole Robinson 提交于
Rather than depend on the RPM to put it in place, since this doesn't cover the qemu:///session case. Currently auto allocated socket path is completely busted with qemu:///session https://bugzilla.redhat.com/show_bug.cgi?id=1105274 And because we chown the directory at driver startup now, this also fixes autosocket startup failures when using user/group=root https://bugzilla.redhat.com/show_bug.cgi?id=1044561 https://bugzilla.redhat.com/show_bug.cgi?id=1146886
-
- 22 4月, 2015 1 次提交
-
-
由 Jim Fehlig 提交于
Introduce libxl.conf configuration file, adding the 'autoballoon' setting as the first knob for controlling the libxl driver. Signed-off-by: NJim Fehlig <jfehlig@suse.com>
-
- 15 4月, 2015 1 次提交
-
-
由 Michal Privoznik 提交于
Throughout the code, we have several places need to construct a path somewhere in /sys/class/net/... They are not consistent and nearly each code piece invents its own way how to do it. So unify this by: 1) use virNetDevSysfsFile() wherever possible 2) At least use common macro SYSFS_NET_DIR declared in virnetdev.h at the rest of places which can't go with 1) Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
- 26 3月, 2015 1 次提交
-
-
由 Amy Fong 提交于
In some circumstances where the build tree differs from the source, libvirt's compile will try to create the symlink for cpu_map.xml before creating the directory $(abs_builddir)/cpu: 'src/cpu/cpu_map.xml': No such file or directory' Do not create the symlink, it is no longer needed after commit e562e82f Load CPU map from builddir when run uninstalled Signed-off-by: NAmy Fong <amy.fong@windriver.com> Signed-off-by: NJán Tomko <jtomko@redhat.com>
-
- 25 3月, 2015 2 次提交
-
-
由 Pavel Hrdina 提交于
Commit 95695388 introduced new util/virthreadjob.c/h files but the makefile has type that breaks rpm build. Signed-off-by: NPavel Hrdina <phrdina@redhat.com>
-
由 Jiri Denemark 提交于
Each thread can use a thread local variable to keep the name of a job which is currently running in the job. The virThreadJobSetWorker API is supposed to be called once by any thread which is used as a worker, i.e., it is waiting in a pool, woken up to do a job, and returned back to the pool. The virThreadJobSet/virThreadJobClear APIs are to be called at the beginning/end of each job. Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
-
- 23 3月, 2015 1 次提交
-
-
由 Natanael Copa 提交于
Always add udev linker flags when WITH_UDEV is enabled to avoid underlinking. See commit 43dbcb15 (interface: always build all available backends) Signed-off-by: NNatanael Copa <ncopa@alpinelinux.org>
-
- 18 3月, 2015 1 次提交
-
-
由 Antoni Segura Puimedon 提交于
Adds the port type definitions and methods that will be used to bind interfaces to the Midonet virtual ports. virtnetdevmidonet.c adds the way to bind and unbind the ports by calling into the Midonet Host Agent control command line (installed with the midolman package). Signed-off-by: NAntoni Segura Puimedon <toni+libvirt@midokura.com>
-
- 21 2月, 2015 1 次提交
-
-
由 Peter Krempa 提交于
For a while now there are two places that gather information about NUMA related guest configuration. While the XML can't be changed we can at least store the data in one place in the definition. Rename the numatune_conf.[ch] files to numa_conf as later patches will move the rest of the definitions from the cpu definition to this one.
-
- 19 2月, 2015 1 次提交
-
-
由 Jiri Denemark 提交于
Not all files we want to find using virFileFindResource{,Full} are generated when libvirt is built, some of them (such as RNG schemas) are distributed with sources. The current API was not able to find source files if libvirt was built in VPATH. Both RNG schemas and cpu_map.xml are distributed in source tarball. Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
-
- 27 1月, 2015 2 次提交
-
-
由 Daniel P. Berrange 提交于
For stateless, client side drivers, it is never correct to probe for secondary drivers. It is only ever appropriate to use the secondary driver that is associated with the hypervisor in question. As a result the ESX & HyperV drivers have both been forced to do hacks where they register no-op drivers for the ones they don't implement. For stateful, server side drivers, we always just want to use the same built-in shared driver. The exception is virtualbox which is really a stateless driver and so wants to use its own server side secondary drivers. To deal with this virtualbox has to be built as 3 separate loadable modules to allow registration to work in the right order. This can all be simplified by introducing a new struct recording the precise set of secondary drivers each hypervisor driver wants struct _virConnectDriver { virHypervisorDriverPtr hypervisorDriver; virInterfaceDriverPtr interfaceDriver; virNetworkDriverPtr networkDriver; virNodeDeviceDriverPtr nodeDeviceDriver; virNWFilterDriverPtr nwfilterDriver; virSecretDriverPtr secretDriver; virStorageDriverPtr storageDriver; }; Instead of registering the hypervisor driver, we now just register a virConnectDriver instead. This allows us to remove all probing of secondary drivers. Once we have chosen the primary driver, we immediately know the correct secondary drivers to use. Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
由 Daniel P. Berrange 提交于
A bunch of code is wrapped in #if WITH_LIBVIRTD in order to enable the virStateDriver to be disabled when libvirtd is not built. Disabling this code doesn't have any real functional benefit beyond removing 1 pointer from the virConnectPtr struct, while having a cost of many more conditionals. Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
- 16 1月, 2015 1 次提交
-
-
由 Cédric Bosdonnat 提交于
Moving code for parsing and formatting network routes to networkcommon_conf helps reusing those routes for domains. The route definition has been hidden to help reducing the number of unnecessary checks in the format function.
-
- 14 1月, 2015 1 次提交
-
-
由 Jim Fehlig 提交于
Introduce a parser/formatter for the xl config format. Since the deprecation of xm/xend, the VM config file format has diverged as new features are added to libxl. This patch adds support for parsing and formating the xl config format. It supports the existing xm config format, plus adds support for spice graphics and xl disk config syntax. Disk config is specified a bit differently in xl as compared to xm. In xl, disk config consists of comma-separated positional parameters and keyword/value pairs separated by commas. Positional parameters are specified as follows target, format, vdev, access Supported keys for key=value options are devtype, backendtype The positional paramters can also be specified in key/value form. For example the following xl disk config are equivalent /dev/vg/guest-volume,,hda /dev/vg/guest-volume,raw,hda,rw format=raw, vdev=hda, access=rw, target=/dev/vg/guest-volume See $xen_sources/docs/misc/xl-disk-configuration.txt for more details. xl disk config is parsed with the help of xlu_disk_parse() from libxlutil, libxl's utility library. Although the library exists in all Xen versions supported by the libxl virt driver, only recently has the corresponding header file been included. A check for the header is done in configure.ac. If not found, xlu_disk_parse() is declared externally. Signed-off-by: NKiarie Kahurani <davidkiarie4@gmail.com> Signed-off-by: NJim Fehlig <jfehlig@suse.com>
-
- 13 1月, 2015 6 次提交
-
-
由 Jim Fehlig 提交于
This reverts commit 2c78051a. Conflicts: src/Makefile.am Signed-off-by: NJim Fehlig <jfehlig@suse.com>
-
由 Jim Fehlig 提交于
This reverts commit 703ef966. Signed-off-by: NJim Fehlig <jfehlig@suse.com>
-
由 Jim Fehlig 提交于
This reverts commit 1b21d300. Conflicts: src/Makefile.am Signed-off-by: NJim Fehlig <jfehlig@suse.com>
-
由 Jim Fehlig 提交于
This reverts commit e662968f. Signed-off-by: NJim Fehlig <jfehlig@suse.com>
-
由 Jim Fehlig 提交于
This reverts commit edacdb3d. Signed-off-by: NJim Fehlig <jfehlig@suse.com>
-
由 Jim Fehlig 提交于
This reverts commit 533349ff. Signed-off-by: NJim Fehlig <jfehlig@suse.com>
-
- 09 1月, 2015 1 次提交
-
-
由 Eric Blake 提交于
I noticed this while working on a previous commit. Why should we be calling out '../src/' when it is sufficient to refer to just './'? Blind copy-and-paste runs rampant in this file :) * src/Makefile.am (INCLUDES, *_CFLAGS): Shorten to $(srcdir). Signed-off-by: NEric Blake <eblake@redhat.com>
-
- 08 1月, 2015 4 次提交
-
-
由 Pavel Hrdina 提交于
Well, the parallel build doesn't work as there are not dependencies set correctly. When running 'make -j' I see this error: make[2]: Entering directory '/home/zippy/work/libvirt/libvirt.git/src' GEN util/virkeymaps.h GEN locking/lock_protocol.h make[2]: *** No rule to make target 'xenconfig/xen_xl_disk.h', needed by 'all'. Stop. make[2]: *** Waiting for unfinished jobs.... GEN lxc/lxc_controller_dispatch.h The fix is to correctly set dependencies by letting make know that .c and .h are to be generated from .l. Moreover, the section is moved closer to the other section which uses it. Signed-off-by: NMichal Privoznik <mprivozn@redhat.com> Signed-off-by: NPavel Hrdina <phrdina@redhat.com>
-
由 Pavel Hrdina 提交于
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>
-
由 Pavel Hrdina 提交于
This reverts commit 703ef966. Signed-off-by: NPavel Hrdina <phrdina@redhat.com>
-
由 Eric Blake 提交于
Ever since commit 2c78051a split out a helper library for the sake of changing CFLAGS, a VPATH build with xenconfig enabled has failed: CC xenconfig/libvirt_xenxldiskparser_la-xen_xl_disk.lo ../../src/xenconfig/xen_xl_disk.l:37:21: fatal error: xen_xl.h: No such file or directory # include "xen_xl.h" ^ compilation terminated. Makefile:9462: recipe for target 'xenconfig/libvirt_xenxldiskparser_la-xen_xl_disk.lo' failed The solution is to tell the build to look for xen_xl.h relative to $(srcdir), since we keep that file under version control. [Not fixed here - the raw use of -Wno-unused-parameter in CFLAGS is NOT portable; ideally, we should be doing a configure test and only supplying that argument when we know the compiler supports -Wunused-parameter; but that's a patch for another day] [Not fixed here - there are still issues with parallel builds hitting a race between generating the files and trying to compile/distribute them] * src/Makefile.am (libvirt_xenxldiskparser_la_CFLAGS): Add another include directory. Signed-off-by: NEric Blake <eblake@redhat.com>
-
- 05 1月, 2015 1 次提交
-
-
由 Pavel Hrdina 提交于
Commit 2c78051a introduced build breaker with type in Makefile.am by specifying wrong header file. Signed-off-by: NPavel Hrdina <phrdina@redhat.com>
-
- 04 1月, 2015 1 次提交
-
-
由 Kiarie Kahurani 提交于
Introduce a Xen xl parser This parser allows for users to convert the new xl disk format and spice graphics config to libvirt xml format and vice versa. Regarding the spice graphics config, the code is pretty much straight forward. For the disk {formating, parsing}, this parser takes care of the new xl format which include positional parameters and key/value parameters. In xl format disk config a <diskspec> consists of parameters separated by commas. If the parameters do not contain an '=' they are automatically assigned to certain options following the order below target, format, vdev, access The above are the only mandatory parameters in the <diskspec> but there are many more disk config options. These options can be specified as key=value pairs. This takes care of the rest of the options such as devtype, backend, backendtype, script, direct-io-safe, The positional paramters can also be specified in key/value form for example /dev/vg/guest-volume,,hda /dev/vg/guest-volume,raw,hda,rw format=raw, vdev=hda, access=rw, target=/dev/vg/guest-volume are interpleted to one config. In xm format, the above diskspec would be written as phy:/dev/vg/guest-volume,hda,w The disk parser is based on the same parser used successfully by the Xen project for several years now. Ian Jackson authored the scanner, which is used by this commit with mimimal changes. Only the PREFIX option is changed, to produce function and file names more consistent with libvirt's convention. Signed-off-by: NKiarie Kahurani <davidkiarie4@gmail.com> Signed-off-by: NJim Fehlig <jfehlig@suse.com>
-
- 11 12月, 2014 1 次提交
-
-
由 Matthew Rosato 提交于
Currently, MAC registration occurs during device creation, which is early enough that, during live migration, you end up with duplicate MAC addresses on still-running source and target devices, even though the target device isn't actually being used yet. This patch proposes to defer MAC registration until right before the guest can actually use the device -- In other words, right before starting guest CPUs. Signed-off-by: NMatthew Rosato <mjrosato@linux.vnet.ibm.com> Signed-off-by: NLaine Stump <laine@laine.org>
-
- 04 12月, 2014 1 次提交
-
-
由 Conrad Meyer 提交于
Reboot requires more sophistication and is left as a future work item -- but at least part of the plumbing is in place. Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
- 29 10月, 2014 3 次提交
-
-
由 Michal Privoznik 提交于
As I've pushed 5892944f I haven't noticed one small nitpick. There was this backslash missing on the line 1231 in the enumeration of libraries to be added to vbox storage driver. This resulted in nondeterministic build which sometimes succeeded and sometimes failed. Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
由 Taowei Luo 提交于
This patch provides the new stroage driver for vbox. The work is similar with patch 87dea4fc and the next b4022de3.
-
由 Taowei Luo 提交于
This patch rewrites the following functions *vboxStorageOpen *vboxStorageClose *vboxConnectNumOfStoragePools *vboxConnectListStoragePools *vboxStoragePoolLookupByName These functions do not call any vbox API, so I directly move it from vbox_tmpl.c to vbox_storage.c A small improvement is made on vboxConnectListStoragePools. The if condition nnames == 1 is modified to nnames > 0. So if the caller put more than one slot to get active storage pools, the new function will return exactly one, while the old one would only return 0.
-
- 25 10月, 2014 1 次提交
-
-
由 Daniel P. Berrange 提交于
The recently added driver-*.h files were not listed in the Makefile.am causing them to be missed when creating dists. Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
- 24 10月, 2014 4 次提交
-
-
由 Daniel P. Berrange 提交于
Introduce a src/libvirt-host.c file to hold all the methods related to the virConnect type.
-
由 Daniel P. Berrange 提交于
Introduce a src/libvirt-domain.c file to hold all the methods related to the virDomain type.
-
由 Daniel P. Berrange 提交于
Introduce a src/libvirt-storage.c file to hold all the methods related to the virStorage{Pool,Vol} types.
-
由 Daniel P. Berrange 提交于
Introduce a src/libvirt-stream.c file to hold all the methods related to the virStream type.
-