In most cases this affects flags parameters that are unsigned in the
public and driver API but signed in the XDR protocol. Switch the
XDR protocol to unsigned for those.

A counterexample is virNWFilterGetXMLDesc. Its flags parameter is signed
in the public API and XDR protocol, but unsigned in the driver API.

virNodeGetFreeMemory used unsigned long long in the public API but
signed hyper in the XDR protocol. Convert the XDR protocol to use
unsigned hyper.

As explained by Eric before, this doesn't affect the on-the-wire protocol.

This allows to remove some special case code from the generator.

The current virDomainMigrateFinish3 method signature attempts to
distinguish two types of errors, by allowing return with ret== 0,
but ddomain == NULL, to indicate a failure to start the guest.
This is flawed, because when ret == 0, there is no way for the
virErrorPtr details to be sent back to the client.

Change the signature of virDomainMigrateFinish3 so it simply
returns a virDomainPtr, in the same way as virDomainMigrateFinish2
The disk locking code will protect against the only possible
failure mode this doesn't account for (loosing conenctivity to
libvirtd after Finish3 starts the CPUs, but before the client
sees the reply for Finish3).

* src/driver.h, src/libvirt.c, src/libvirt_internal.h: Change
  virDomainMigrateFinish3 to return a virDomainPtr instead of int
* src/remote/remote_driver.c, src/remote/remote_protocol.x,
  daemon/remote.c, src/qemu/qemu_driver.c, src/qemu/qemu_migration.c:
  Update for API change

The virDomainMigratePerform3 currently has a single URI parameter
whose meaning varies. It is either

 - A QEMU migration URI (normal migration)
 - A libvirtd connection URI (peer2peer migration)

Unfortunately when using peer2peer migration, without also
using tunnelled migration, it is possible that both URIs are
required.

This adds a second URI parameter to the virDomainMigratePerform3
method, to cope with this scenario. Each parameter how has a fixed
meaning.

NB, there is no way to actually take advantage of this yet,
since virDomainMigrate/virDomainMigrateToURI do not have any
way to provide the 2 separate URIs

* daemon/remote.c, src/remote/remote_driver.c,
  src/remote/remote_protocol.x, src/remote_protocol-structs: Add
  the second URI parameter to perform3 message
* src/driver.h, src/libvirt.c, src/libvirt_internal.h: Add
  the second URI parameter to Perform3 method
* src/libvirt_internal.h, src/qemu/qemu_migration.c,
  src/qemu/qemu_migration.h: Update to handle URIs correctly

This extends the v3 migration protocol such that the
virDomainMigrateBegin3 and virDomainMigratePerform3
methods accept an application supplied XML config for
the target VM.

If the 'xmlin' parameter is NULL, then Begin3 uses the
current guest XML as normal. A driver implementing the
Begin3 method should either reject all non-NULL 'xmlin'
parameters, or strictly validate that the app supplied
XML does not change guest ABI.

The Perform3 method also needed the xmlin parameter to
cope with the Peer2Peer migration sequence.

NB it is not yet possible to use this capability since
neither of the public virDomainMigrate/virDomainMigrateToURI
methods have a way to pass in XML.

* daemon/remote.c, src/remote/remote_driver.c,
  src/remote/remote_protocol.x, src/remote_protocol-structs:
  Add 'remote_string xmlin' parameter to begin3/perform3
  RPC messages
* src/libvirt.c, src/driver.h, src/libvirt_internal.h: Add
  'const char *xmlin' parameter to Begin3/Perform3 methods
* src/qemu/qemu_driver.c, src/qemu/qemu_migration.c,
  src/qemu/qemu_migration.h: Pass xmlin parameter around
  migration methods

The on-the-wire protocol is identical; XDR guarantees that
both 'hyper' and 'unsigned hyper' are transmitted as 8 bytes.

* src/remote/remote_protocol.x (remote_get_version_ret)
(remote_get_lib_version_ret): Match public API.
* daemon/remote_generator.pl: Drop special case.
* src/remote_protocol-structs: Reflect updated type.

support for virDomainSetSchedulerParametersFlags of remote driver.

* src/remote/remote_protocol.x: Define wire protocol for migration
  protocol v3
* daemon/remote.c: Server side dispatch
* src/remote/remote_driver.c: Client side serialization
* src/remote/remote_protocol.c, src/remote/remote_protocol.h,
  daemon/remote_dispatch_args.h, daemon/remote_dispatch_prototypes.h,
  daemon/remote_dispatch_ret.h, daemon/remote_dispatch_table.h:
  Re-generate files
* src/remote_protocol-structs: Declare new ABIs

* src/remote_protocol-structs (remote_domain_screenshot_args): Use
spelling preferred by dwarves.

* src/remote/remote_protocol.x: Wire protocol definition
* daemon/remote.c: Daemon part
* src/remote/remote_driver.c: Client part
* src/remote_protocol-structs: Add structures

This matches the public API and helps to get rid of some special
case code in the remote generator.

Rename driver API functions and XDR protocol structs.

No functional change included outside of the remote generator.

Once again rename members in the XDR definitions to avoid special case
code in the generator.

Avoids special case handling in the remote generator.

This simplifies the remote protocol code generator.

Also rename 'ret' to 'result' to resolve a naming conflict in the
generator.

* daemon/remote.c, src/remote/remote_driver.c: Implementation
  of storage vol upload/download APIs
* src/remote/remote_protocol.x: Wire protocol definition for
  upload/download
* daemon/remote_dispatch_args.h, daemon/remote_dispatch_prototypes.h,
  daemon/remote_dispatch_table.h, src/remote/remote_protocol.h,
  src/remote/remote_protocol.c: Re-generate

* src/Makefile.am (remote_protocol-structs): Flatten tabs.
* src/remote_protocol-structs: Likewise.  Also add a hint to emacs
to make it easier to keep spaces in the file.

* src/remote/remote_protocol.x: Define wire protocol
* daemon/remote.c, src/remote/remote_driver.c: Add new
  functions for virDomainMigrateSetSpeed API
* src/remote/remote_protocol.c, src/remote/remote_protocol.h,
  daemon/remote_dispatch_args.h, daemon/remote_dispatch_prototypes.h,
  daemon/remote_dispatch_table.h: Re-generate files

Remote protocol implementation of virDomainSetBlkioParameters and virDomainGetBlkioParameters.
Signed-off-by: NGui Jianfeng <guijianfeng@cn.fujitsu.com>

This patch implements the remote protocol to address the new API.
Signed-off-by: NTaku Izumi <izumi.taku@jp.fujitsu.com>

Done by editing the first three files, then running
'make -C src rpcgen', then editing src/remote_protocol-structs
to match.

* daemon/remote.c (remoteDispatchGetSysinfo): New function.
* src/remote/remote_driver.c (remoteGetSysinfo, remote_driver):
Client side serialization.
* src/remote/remote_protocol.x (remote_get_sysinfo_args)
(remote_get_sysinfo_ret): New types.
(REMOTE_PROC_GET_SYSINFO): New enum value.
* daemon/remote_dispatch_args.h: Regenerate.
* daemon/remote_dispatch_prototypes.h: Likewise.
* daemon/remote_dispatch_ret.h: Likewise.
* daemon/remote_dispatch_table.h: Likewise.
* src/remote/remote_protocol.c: Likewise.
* src/remote/remote_protocol.h: Likewise.
* src/remote_protocol-structs: Likewise.

* daemon/remote.c
* daemon/remote_dispatch_args.h
* daemon/remote_dispatch_prototypes.h
* daemon/remote_dispatch_ret.h
* daemon/remote_dispatch_table.h
* src/remote/remote_driver.c
* src/remote/remote_protocol.c
* src/remote/remote_protocol.h
* src/remote/remote_protocol.x
* src/remote_protocol-structs

This provides an implementation of the virDomainOpenConsole
API for the remote driver client and server.

* daemon/remote.c: Server side impl
* src/remote/remote_driver.c: Client impl
* src/remote/remote_protocol.x: Wire definition

Done by editing the first three files, then running
'make -C src rpcgen', then editing src/remote_protocol-structs
to match.

* daemon/remote.c (remoteDispatchDomainSetVcpusFlags)
(remoteDispatchDomainGetVcpusFlags): New functions.
* src/remote/remote_driver.c (remoteDomainSetVcpusFlags)
(remoteDomainGetVcpusFlags, remote_driver): Client side
serialization.
* src/remote/remote_protocol.x
(remote_domain_set_vcpus_flags_args)
(remote_domain_get_vcpus_flags_args)
(remote_domain_get_vcpus_flags_ret)
(REMOTE_PROC_DOMAIN_SET_VCPUS_FLAGS)
(REMOTE_PROC_DOMAIN_GET_VCPUS_FLAGS): Define wire format.
* daemon/remote_dispatch_args.h: Regenerate.
* daemon/remote_dispatch_prototypes.h: Likewise.
* daemon/remote_dispatch_table.h: Likewise.
* src/remote/remote_protocol.c: Likewise.
* src/remote/remote_protocol.h: Likewise.
* src/remote_protocol-structs: Likewise.

Add proper documentation to the new VIR_DOMAIN_MEMORY_* macros in
libvirt.h.in to placate apibuild.py.

Mark args as unused in for libvirt_virDomain{Get,Set}MemoryParameters
in the Python bindings and add both to the libvirtMethods array.

Update remote_protocol-structs to placate make syntax-check.

Undo unintended modifications in vboxDomainGetInfo.

Update the function table of the VirtualBox and XenAPI drivers.

* src/remote_protocol-structs: Tweak to match intentional type
change (with no ABI change) in remote protocol.

Define the wire format for the new virDomainCreateWithFlags
API, and implement client and server side of marshaling code.

* daemon/remote.c (remoteDispatchDomainCreateWithFlags): Add
server side dispatch for virDomainCreateWithFlags.
* src/remote/remote_driver.c (remoteDomainCreateWithFlags)
(remote_driver): Client side serialization.
* src/remote/remote_protocol.x
(remote_domain_create_with_flags_args)
(remote_domain_create_with_flags_ret)
(REMOTE_PROC_DOMAIN_CREATE_WITH_FLAGS): Define wire format.
* daemon/remote_dispatch_args.h: Regenerate.
* daemon/remote_dispatch_prototypes.h: Likewise.
* daemon/remote_dispatch_table.h: Likewise.
* src/remote/remote_protocol.c: Likewise.
* src/remote/remote_protocol.h: Likewise.
* src/remote_protocol-structs: Likewise.

Now, if you update remote_protocol.x without also updating
remote_protocol-structs to match, then "make check" will fail.
* src/Makefile.am (remote_protocol-structs): Extract list of
structs and member names from remote_protocol.o.
(check-local): Depend on it.
* src/remote_protocol-structs: New file.