With container based virt, it is useful to be able to pass
pre-opened file descriptors to the container init process.
This allows for containers to be auto-activated from incoming
socket connections, passing the active socket into the container.

To do this, introduce a pair of new APIs, virDomainCreateXMLWithFiles
and virDomainCreateWithFiles, which accept an array of file
descriptors. For the LXC driver, UNIX file descriptor passing
will be used to send them to libvirtd, which will them pass
them down to libvirt_lxc, which will then pass them to the container
init process.

This will only be implemented for LXC right now, but the design
is generic enough it could work with other hypervisors, hence
I suggest adding this to libvirt.so, rather than libvirt-lxc.so
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Add new API in order to set the balloon memory driver statistics collection
period in order to allow dynamic period adjustment for the virsh dommemstats to
display balloon stats data

Convert the type of loop iterators named 'i', 'j', k',
'ii', 'jj', 'kk', to be 'size_t' instead of 'int' or
'unsigned int', also santizing 'ii', 'jj', 'kk' to use
the normal 'i', 'j', 'k' naming
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

https://bugzilla.redhat.com/show_bug.cgi?id=981139

If a domain is paused before migration starts, we need to tell that to
the destination libvirtd to prevent it from resuming the domain at the
end of migration. This regression was introduced by commit 5379bb0f.

This patch introduces two new APIs virDomainMigrate3 and
virDomainMigrateToURI3 that may be used in place of their older
variants. These new APIs take optional migration parameters (such as
bandwidth, domain XML, ...) in an array of virTypedParameters, which
makes adding new parameters easier as there's no need to introduce new
APIs whenever a new migration parameter needs to be added. Both APIs are
backward compatible and will automatically use older migration calls in
case the new calls are not supported as long as the typed parameters
array does not contain any parameter which was not supported by the
older calls.

This patch implements extensible variants of all internal migration APIs
used for v3 migration.

The access control checks in the 'connectOpen' driver method
will require 'conn->driver' to be non-NULL. Set this before
running the 'connectOpen' method and NULL-ify it again on
failure.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

This patch introduces the virAccessManagerPtr class as the
interface between virtualization drivers and the access
control drivers. The viraccessperm.h file defines the
various permissions that will be used for each type of object
libvirt manages
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

This flag is meant for errors happening on the source of the migration
and isn't used on the destination. To allow better migration
compatibility, don't propagate it to the destination.

This patch fixes changes done in commit 29c1e913
that was pushed without implementing review feedback.

The flag introduced by the patch is changed to VIR_DOMAIN_VCPU_GUEST and
documentation makes the difference between regular hotplug and this new
functionality more explicit.

The virsh options that enable the use of the new flag are changed to
"--guest" and the documentation is fixed too.

This flag will allow to use qemu guest agent commands to disable
(offline) and enable (online) processors in a live guest that has the
guest agent running.

Change the build process & driver initialization so that the
VirtualBox driver is built into libvirtd, instead of libvirt.so
This change avoids the VirtualBox GPLv2-only license causing
compatibility problems with libvirt.so which is under the
GPLv2-or-later license.

NB this change prevents use of the VirtualBox driver on the
Windows platform, until such time as libvirtd can be made
to work there.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

qemu-img resize will fail with "The new size must be a multiple of 512"
if libvirt doesn't round it first.
This fixes rhbz#951495
Signed-off-by: NChristophe Fergeau <cfergeau@redhat.com>

These all existed before virfile.c was created, and for some reason
weren't moved.

This is mostly straightfoward, although the syntax rule prohibiting
write() had to be changed to have an exception for virfile.c instead
of virutil.c.

This movement pointed out that there is a function called
virBuildPath(), and another almost identical function called
virFileBuildPath(). They really should be a single function, which
I'll take care of as soon as I figure out what the arglist should look
like.

Pushed under trivial rule

We have seen an issue on s390x platform where domain XMLs larger than 1MB
were used. The define command was finished successfully. The dumpxml command
was not successful (i.e. could not encode message payload).

Enlarged message related sizes (e.g. maximum string size, message size, etc.)
to handle larger system configurations used on s390x platform.

To improve handling of the RPC message size the allocation during encode process
is changed to a dynamic one (i.e. starting with 64kB initial size and increasing
that size in steps up to 16MB if the payload data is larger).
Signed-off-by: NDaniel Hansel <daniel.hansel@linux.vnet.ibm.com>
Signed-off-by: NViktor Mihajlovski <mihajlov@linux.vnet.ibm.com>

Commit 7c9a2d88 cleaned up too many headers; FreeBSD builds
failed due to:

util/virutil.c:556: warning: implicit declaration of function 'canonicalize_file_name'

(Not sure which Linux header leaked this declaration, but gnulib
only guarantees it in stdlib.h)

libvirt.c:956: warning: implicit declaration of function 'virGetUserConfigDirectory'

(Here, a build on Linux was picking up virutil.h indirectly via
one of the conditional driver headers, where that driver was not
being built on my FreeBSD setup)

* src/util/virutil.c (includes): Need <stdlib.h> for
canonicalize_file_name.
* src/libvirt.c (includes): Use "virutil.h" unconditionally,
rather than relying on conditional indirect inclusion.
Signed-off-by: NEric Blake <eblake@redhat.com>

The source code base needs to be adapted as well. Some files
include virutil.h just for the string related functions (here,
the include is substituted to match the new file), some include
virutil.h without any need (here, the include is removed), and
some require both.

The existing virNodeDeviceDettach() assumes that there is only a
single PCI device assignment backend driver appropriate for any
hypervisor. This is no longer true, as the qemu driver is getting
support for PCI device assignment via VFIO. The new API
virNodeDeviceDetachFlags adds a driverName arg that should be set to
the exact same string set in a domain <hostdev>'s <driver name='x'/>
element (i.e. "vfio", "kvm", or NULL for default). It also adds a
flags arg for good measure (and because it's possible we may need it
when we start dealing with VFIO's "device groups").

It will simplify later work if the sub-drivers have dedicated
APIs / field names. ie virNetworkDriver should have
virDrvNetworkOpen and virDrvNetworkClose methods
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

The driver.h struct for node devices used an inconsistent
naming scheme 'DeviceMonitor' instead of the more usual
'NodeDeviceDriver'. Fix this everywhere it has leaked
out to.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Ensure that the driver struct field names match the public
API names. For an API virXXXX we must have a driver struct
field xXXXX. ie strip the leading 'vir' and lowercase any
leading uppercase letters.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

The return value description stated that 0 is returned in case of success
instead of the count of vCPUs.

If libvirt makes any gcry_control() calls, then this
prevents gnutls for doing any initialization. As such
we must take care to do full initialization of libcrypt
on a par with what gnutls would have done. In particular
we must disable "sec mem" for cases where the user does
not have mlock() permission. We also skip our init of
libgcrypt if something else (ie the app using libvirt)
has beaten us to it.

https://bugzilla.redhat.com/show_bug.cgi?id=951630Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

https://bugzilla.redhat.com/show_bug.cgi?id=948821

The last Viktor's effort to fix the race and memory corruption unfortunately
wasn't complete in the case the close callback was not registered in an
connection. At that time, the trail of event's that I'll describe later could
still happen and corrupt the memory or cause a crash of the client (including
the daemon in case of a p2p migration).

Consider the following prerequisities and trail of events:
Let's have a remote connection to a hypervisor that doesn't have a close
callback registered and the client is using the event loop. The crash happens in
cooperation of 2 threads. Thread E is the event loop and thread W is the worker
that does some stuff. R denotes the remote client.

1.) W - The client finishes everything and sheds the last reference on the client
2.) W - The virObject stuff invokes virConnectDispose that invokes doRemoteClose
3.) W - the remote close method invokes the REMOTE_PROC_CLOSE RPC method.
4.) W - The thread is preempted at this point.
5.) R - The remote side receives the close and closes the socket.
6.) E - poll() wakes up due to the closed socket and invokes the close callback
7.) E - The event loop is preempted right before remoteClientCloseFunc is called
8.) W - The worker now finishes, and frees the conn object.
9.) E - The remoteClientCloseFunc accesses the now-freed conn object in the
        attempt to retrieve pointer for the real close callback.
10.) Kaboom, corrupted memory/segfault.

This patch tries to fix this by introducing a new object that survives the
freeing of the connection object. We can't increase the reference count on the
connection object itself or the connection would never be closed, as the
connection is closed only when the reference count reaches zero.

The new object - virConnectCloseCallbackData - is a lockable object that keeps
the pointers to the real user registered callback and ensures that the
connection callback is either not called if the connection was already freed or
that the connection isn't freed while this is being called.

By adjusting the reference count of the connection object we
prevent races between callback function and virConnectClose.
Signed-off-by: NViktor Mihajlovski <mihajlov@linux.vnet.ibm.com>

virConnectOpenAuth didn't require 'name' to be specified (VIR_DEBUG
used NULLSTR() for the output) and by default, if name == NULL, the
default connection uri is used.  This was not indicated in the
documentation and wasn't checked for in other API's VIR_DEBUG outputs.

VIR_CONNECT_LIST_NODE_DEVICES_CAP_FC_HOST to filter the FC HBA,
and VIR_CONNECT_LIST_NODE_DEVICES_CAP_VPORTS to filter the FC HBA
which supports vport.