The split of ide-disk into the two separate devices was introduced by
qemu commit 1f56e32a7f4b3 released in qemu v0.15.

Note that when compared to the previous commit which made sure that no
disk related tests were touched, in this case it's not as careful.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>

The field was added in qemu v0.13.0-rc0-731-g1ca4d09ae0 so all supported
qemu versions now use it.

There's a LOT of test fallout as we did not use capabilities close
enough to upstream for many of our tests.

Several tests had a 'bootindex' variant. Since they'd become redundant
they are also removed here.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Implied by QEMU >= 1.3.0.
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>

Implied by QEMU >= 1.2.0.
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>

Implied by QEMU >= 1.2.0.
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>

Implied by QEMU >= 1.2.0.
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>

Implied by QEMU >= 1.2.0.
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>

Implied by QEMU >= 1.2.0.
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>

Implied by QEMU >= 1.2.0.

Delete this one first, because QEMU_CAPS_NODEFCONFIG is only used
when QEMU_CAPS_NO_USER_CONFIG is unsupported.
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>

We require QEMU >= 1.5.0, assume every QEMU supports it.
Sadly that does not let us trivially drop qemuMonitor's
priv->monJSON bool, because of qemuDomainQemuAttach.
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>

Similarly to the previous commit, rename .args files.

The files were renamed using the following commands. From
qemuxml2argvdata:

  for i in qemuxml2argv-*.args; do mv $i ${i#qemuxml2argv-}; done

and then (to fix broken symlinks) from qemuxml2argvdata and
qemuxml2xmloutdata:

  for i in $(find . -xtype l); do \
      ln -sf $(readlink $i | sed 's/qemuxml2argv-//') $i;
  done
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Move together sections which are conditionaly executed depending on
whether -device will be used together with the -drive.

AFAIK there aren't any cases where we will/should hit the old code
path for our supported qemu versions, so drop the old code.

Massive test suite churn follows
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>
Signed-off-by: NCole Robinson <crobinso@redhat.com>

Our test data used a lot of different qemu binary paths and some
of them were based on downstream systems.

Note that there is one file where I had to add "accel=kvm" because
the qemuargv2xml code parses "/usr/bin/kvm" as virt type="kvm".
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

For every but the last argument, we also need space for a space
and a backslash.

Rewrap everything longer than 78 characters.

Support for SMP topology was added by qemu commit dc6b1c09849484fbbc50
prior to 0.12.0, our minimum supported qemu version.

$ git describe --tags dc6b1c09849484fbbc50803307e4c7a3d81eab62
v0.11.0-rc0-449-gdc6b1c0
$ git describe --tags --contains dc6b1c09849484fbbc50803307e4c7a3d81eab
v0.12.0-rc0~1477

Per-domain directories were introduced in order to be able to
completely separate security labels for each domain (commit
f1f68ca3).  However when the domain
name is long (let's say a ridiculous 110 characters), we cannot
connect to the monitor socket because on length of UNIX socket address
is limited.  In order to get around this, let's shorten it in similar
fashion and in order to avoid conflicts, throw in an ID there as well.
Also save that into the status XML and load the old status XMLs
properly (to clean up after older domains).  That way we can change it
in the future.

The shortening can be seen in qemuxml2argv tests, for example in the
hugepages-pages2 case.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Just recently, qemu forbade specifying format for sourceless
disks (qemu commit 39c4ae941ed992a3bb5). It kind of makes sense.
If there's no file to open, why specify its format. Anyway, I
have a domain like this:

    <disk type='file' device='cdrom'>
      <driver name='qemu' type='raw'/>
      <target dev='hda' bus='ide'/>
      <readonly/>
      <address type='drive' controller='0' bus='0' target='0' unit='0'/>
    </disk>

and obviously I am unable to start it. Therefore, a fix on our
side is needed too.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

As of QEMU 0.10.0 the -vga argument was introduced, so the
QEMU driver can assume it is always available.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

As of QEMU 0.10.0 the -drive format= parameter was added,
so the QEMU driver can assume it is always available.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

The -uuid arg was added in QEMU 0.10.0, so the QEMU driver can
assume it is always available.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

The -name arg was added in QEMU 0.9.1, so the QEMU driver can
assume it is always available.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Back in

  commit bd6c46fa
  Author: Juerg Haefliger <juerg.haefliger@hp.com>
  Date:   Mon Jan 31 06:42:57 2011 -0500

    tests: handle backspace-newline pairs in test input files

all the test argv files were line wrapped so that the args
were less than 80 characters.

The way the line wrapping was done turns out to be quite
undesirable, because it often leaves multiple parameters
on the same line. If we later need to add or remove
individual parameters, then it leaves us having to redo
line wrapping.

This commit changes the line wrapping so that every
single "-param value" is one its own new line. If the
"value" is still too long, then we break on ',' or ':'
or ' ' as needed.

This means that when we come to add / remove parameters
from the test files line, the patch diffs will only
ever show a single line added/removed which will greatly
simplify review work.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

https://bugzilla.redhat.com/show_bug.cgi?id=1142631

This patch resolves a situation where the same "<target dev='$name'...>"
can be used for multiple disks in the domain.

While the $name is "mostly" advisory regarding the expected order that
the disk is added to the domain and not guaranteed to map to the device
name in the guest OS, it still should be unique enough such that other
domblk* type operations can be performed.

Without the patch, the domblklist will list the same Target twice:

$ virsh domblklist $dom
Target     Source
------------------------------------------------
sda        /var/lib/libvirt/images/file.qcow2
sda        /var/lib/libvirt/images/file.img

Additionally, getting domblkstat, domblkerror, domblkinfo, and other block*
type calls will not be able to reference the second target.

Fortunately, hotplug disallows adding a "third" sda value:

$ qemu-img create -f raw /var/lib/libvirt/images/file2.img 10M
$ virsh attach-disk $dom /var/lib/libvirt/images/file2.img sda
error: Failed to attach disk
error: operation failed: target sda already exists

$

BUT, it since 'sdb' doesn't exist one would get the following on the same
hotplug attempt, but changing to use 'sdb' instead of 'sda'

$ virsh attach-disk $dom /var/lib/libvirt/images/file2.img sdb
error: Failed to attach disk
error: internal error: unable to execute QEMU command 'device_add': Duplicate ID 'scsi0-0-1' for device

$

Since we cannot fix this issue at parsing time, the best that can be done so
as to not "lose" a domain is to make the check prior to starting the guest
with the results as follows:

$ virsh start $dom
error: Failed to start domain $dom
error: XML error: target 'sda' duplicated for disk sources '/var/lib/libvirt/images/file.qcow2' and '/var/lib/libvirt/images/file.img'

$

Running 'make check' found a few more instances in the tests where this
duplicated target dev value was being used. These also exhibited some
duplicated 'id=' values (negating the uniqueness argument of aliases) in
the corresponding .args file and of course the *xmlout version of a few
input XML files.