name functions to be the name of the export function followed by Callback

    ex. for virInterfaceObjListExport, the callback function is named
        virInterfaceObjListExportCallback
Signed-off-by: NAnya Harter <aharter@redhat.com>
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>

name structs to be the name of the Export function followed by Data
also tweak definitions to follow standard struct definition pattern

    ex. for virInterfaceObjListExport, the struct is defined as follows:

        typedef struct _virInterfaceObjListExportData virInterfaceObjListExportData;
        typedef virInterfaceObjListExportData *virInterfaceObjListExportDataPtr;
        struct _virInterfaceObjListExportData {...};
Signed-off-by: NAnya Harter <aharter@redhat.com>
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>

When building libvirt with libcurl debug enabled (with
ESX_VI__CURL__ENABLE_DEBUG_OUTPUT set), the message bellow pops up:

make[3]: Entering directory '/mnt/data/gitroot/libvirt/src'
  CC       esx/libvirt_driver_esx_la-esx_vi.lo
esx/esx_vi.c: In function 'esxVI_CURL_Debug':
esx/esx_vi.c:191:5: error: enumeration value 'CURLINFO_SSL_DATA_IN' not handled in switch [-Werror=switch-enum]
     switch (type) {
     ^~~~~~
esx/esx_vi.c:191:5: error: enumeration value 'CURLINFO_SSL_DATA_OUT' not handled in switch [-Werror=switch-enum]
esx/esx_vi.c:191:5: error: enumeration value 'CURLINFO_END' not handled in switch [-Werror=switch-enum]

Our build requires at least libcurl 7.18.0, which is pretty stable since
it was release in 2008. Fix this problem by handling the mentioned enums
in the code.
Signed-off-by: NMarcos Paulo de Souza <marcos.souza.org@gmail.com>
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Add new XML section to report host's memory bandwidth allocation
capability. The format as below example:

 <host>
 .....
   <memory_bandwidth>
     <node id='0' cpus='0-19'>
       <control granularity='10' min ='10' maxAllocs='8'/>
     </node>
   </memory_bandwidth>
</host>

granularity   ---- granularity of memory bandwidth, unit percentage.
min           ---- minimum memory bandwidth allowed, unit percentage.
maxAllocs     ---- maximum memory bandwidth allocation group supported.
Signed-off-by: NBing Niu <bing.niu@intel.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Add return value check to virResctrlAllocForeachCache in
virDomainCachetuneDefFormat. The virResctrlAllocForeachCache does have
return value, so need check return value to make sure function executed
without error.
Signed-off-by: NBing Niu <bing.niu@intel.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Introduce a new section memorytune to support memory bandwidth allocation.
This is consistent with existing cachetune. As the example:
below:
  <cputune>
    ......
    <memorytune vcpus='0'>
      <node id='0' bandwidth='30'/>
    </memorytune>
  </cputune>

vpus      --- vpus subjected to this memory bandwidth.
id        --- on which node memory bandwidth to be set.
bandwidth --- the memory bandwidth percent to set.
Signed-off-by: NBing Niu <bing.niu@intel.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Factor out vcpus virDomainResctrlDef update from
virDomainCachetuneDefParse and introduce virDomainResctrlAppend.
virDomainResctrlAppend will format vcpus string and append a new
virDomainResctrlDef to virDomainDefPtr. So that this logic can
be reusable.
Signed-off-by: NBing Niu <bing.niu@intel.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Factor out vcpus overlapping detecting part from
virDomainCachetuneDefParse and introduce virDomainResctrlVcpuMatch.
Instead of allocating virResctrlAllocPtr by default, allocating
virResctrlAllocPtr after confirm vcpus not overlap with existing ones.
And virDomainResctrlVcpuMatch can be reused by other resource control
technologies. virDomainResctrlVcpuMatch can clarify old vcpus overlap
error whether an overlap or a redefinition.
Signed-off-by: NBing Niu <bing.niu@intel.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Extract vcpus parsing part from virDomainCachetuneDefParse into one
function called virDomainResctrlParseVcpus. So that vcpus parsing logic
can be reused by other resource control technologies. Adjust error
message and use node->name so that the error message can fit to all
technologies.
Signed-off-by: NBing Niu <bing.niu@intel.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Resctrl not only supports cache tuning, but also memory bandwidth
tuning. Renaming cachetune to resctrl to reflect that. With resctrl,
all allocation for different resources (cache, memory bandwidth) are
aggregated and represented by a virResctrlAllocPtr inside
virDomainResctrlDef.
Signed-off-by: NBing Niu <bing.niu@intel.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Introduce an API to allow setting of the MBA from domain XML.
Signed-off-by: NBing Niu <bing.niu@intel.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Introduce an API that will traverse the memory bandwidth data calling
a callback function for each defined bandwidth entry.
Signed-off-by: NBing Niu <bing.niu@intel.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Introduce virResctrlMemoryBandwidthSubtract and
virResctrlAllocMemoryBandwidth to be used as part of
the virResctrlAllocAssign processing to configure
the available memory bandwidth.
Signed-off-by: NBing Niu <bing.niu@intel.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Introduce virResctrlAllocMemoryBandwidthFormat and
virResctrlAllocParseMemoryBandwidthLine which will format
and parse an entry in the schemata file for MBA.
Signed-off-by: NBing Niu <bing.niu@intel.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Add memory bandwidth allocation support to virresctrl class.
Introducing virResctrlAllocMemBW which is used for allocating memory
bandwidth. Following virResctrlAllocPerType, it also employs a
nested sparse array to indicate whether allocation is available for
particular last level cache.
Signed-off-by: NBing Niu <bing.niu@intel.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

If we have some membw_info data, then we need to calculate the number
of MBA controllers on the system. The value cannot be obtained from a
direct query to the RDT kernel module, but it is the same as the last
level cache value which is calculated by traversing the cache hierarchy
of host(/sys/bus/cpu/devices/cpuX/cache/).
Signed-off-by: NBing Niu <bing.niu@intel.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Introducing virResctrlInfoMemBW for the information memory bandwidth
allocation information.
Signed-off-by: NBing Niu <bing.niu@intel.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Refactor virResctrlAllocFormat so that it is easy to support other
resource allocation technologies.
Signed-off-by: NBing Niu <bing.niu@intel.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Separate resctrl common information parts from CAT specific parts,
so that common information parts can be reused among different
resource allocation technologies.
Signed-off-by: NBing Niu <bing.niu@intel.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Some functions in virresctrl are for CAT only, while some of other
functions are for resource allocation, not just CAT. So change
their names to reflect the reality.
Signed-off-by: NBing Niu <bing.niu@intel.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

By making use of GNU C's cleanup attribute handled by the
VIR_AUTOPTR macro for declaring aggregate pointer variables,
majority of the calls to *Free functions can be dropped, which
in turn leads to getting rid of most of our cleanup sections.
Signed-off-by: NSukrit Bhatnagar <skrtbhtngr@gmail.com>
Reviewed-by: NErik Skultety <eskultet@redhat.com>

By making use of GNU C's cleanup attribute handled by the
VIR_AUTOPTR macro for declaring aggregate pointer variables,
majority of the calls to *Free functions can be dropped, which
in turn leads to getting rid of most of our cleanup sections.
Signed-off-by: NSukrit Bhatnagar <skrtbhtngr@gmail.com>
Reviewed-by: NErik Skultety <eskultet@redhat.com>

By making use of GNU C's cleanup attribute handled by the
VIR_AUTOPTR macro for declaring aggregate pointer variables,
majority of the calls to *Free functions can be dropped, which
in turn leads to getting rid of most of our cleanup sections.
Signed-off-by: NSukrit Bhatnagar <skrtbhtngr@gmail.com>
Reviewed-by: NErik Skultety <eskultet@redhat.com>

By making use of GNU C's cleanup attribute handled by the
VIR_AUTOFREE macro for declaring scalar variables, majority
of the VIR_FREE calls can be dropped, which in turn leads to
getting rid of most of our cleanup sections.
Signed-off-by: NSukrit Bhatnagar <skrtbhtngr@gmail.com>
Reviewed-by: NErik Skultety <eskultet@redhat.com>

By making use of GNU C's cleanup attribute handled by the
VIR_AUTOPTR macro for declaring aggregate pointer variables,
majority of the calls to *Free functions can be dropped, which
in turn leads to getting rid of most of our cleanup sections.
Signed-off-by: NSukrit Bhatnagar <skrtbhtngr@gmail.com>
Reviewed-by: NErik Skultety <eskultet@redhat.com>

By making use of GNU C's cleanup attribute handled by the
VIR_AUTOFREE macro for declaring scalar variables, majority
of the VIR_FREE calls can be dropped, which in turn leads to
getting rid of most of our cleanup sections.
Signed-off-by: NSukrit Bhatnagar <skrtbhtngr@gmail.com>
Reviewed-by: NErik Skultety <eskultet@redhat.com>

Using the new VIR_DEFINE_AUTOPTR_FUNC macro defined in
src/util/viralloc.h, define a new wrapper around an existing
cleanup function which will be called when a variable declared
with VIR_AUTOPTR macro goes out of scope. Also, drop the redundant
viralloc.h include, since that has moved from the source module into
the header.

This commit also typedefs virNetlinkMsg to struct nl_msg type for use
with the cleanup macros.

When a variable of type virNetlinkMsg * is declared using VIR_AUTOPTR,
the function nlmsg_free will be run automatically on it when it
goes out of scope.
Signed-off-by: NSukrit Bhatnagar <skrtbhtngr@gmail.com>
Reviewed-by: NErik Skultety <eskultet@redhat.com>

Add another usage for VIR_AUTOFREE macro which was left in the
commit ec3e8789, thereby dropping a VIR_FREE call and and a cleanup
section.
Signed-off-by: NSukrit Bhatnagar <skrtbhtngr@gmail.com>
Reviewed-by: NErik Skultety <eskultet@redhat.com>

Signed-off-by: NCole Robinson <crobinso@redhat.com>

If a domain has hugepages configured and we're currently building
memory-backend-file for a nvdimm device that domain has we will
put hugepages path onto the command line. It should have been
nvdimm path configured in the XML.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NPavel Hrdina <phrdina@redhat.com>

Broken by commit <901d2b9c>.
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

Commit 6c0d0210 changed the behavior of
virStr*cpy* functions, so now the nodeGetInfo call fails. Version 4.1.0
(default for Fedora 28) works:

Model: Intel Core i7-4500U CPU @ 1.80G

Current master tries to write "Intel Core i7-4500U CPU @ 1.80GHz", but
the string is bigger than nodeinfo->model (which is a char[32]). So this
patch "cuts" the string, and presents the same output from 4.1.0.
Signed-off-by: NMarcos Paulo de Souza <marcos.souza.org@gmail.com>

This reverts commit 12b34f09.

Jansson cannot parse QEMU's quirky JSON.
Revert back to yajl.

https://bugzilla.redhat.com/show_bug.cgi?id=1614569

Conflicts:
  configure.ac:
    Commit 8aa85e0b introduced LIBVIRT_*_LIBISCSI macros.
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>

This reverts commit 93fdc9e0.

Jansson cannot parse QEMU's quirky JSON.
Revert back to yajl.

https://bugzilla.redhat.com/show_bug.cgi?id=1614569Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>

This reverts commit 9cf38263.

Jansson cannot parse QEMU's quirky JSON.
Revert back to yajl.

https://bugzilla.redhat.com/show_bug.cgi?id=1614569Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>

This reverts commit bf114dec.

Jansson cannot parse QEMU's quirky JSON.
Revert back to yajl.

https://bugzilla.redhat.com/show_bug.cgi?id=1614569Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>

This reverts commit 1caf8441.

Jansson cannot parse QEMU's quirky JSON.
Revert back to yajl.

https://bugzilla.redhat.com/show_bug.cgi?id=1614569Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>

This reverts commit 8f802c6d.

Jansson cannot parse QEMU's quirky JSON.
Revert back to yajl.

https://bugzilla.redhat.com/show_bug.cgi?id=1614569Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>

This reverts commit c5ae8e0c.

Jansson cannot parse QEMU's quirky JSON.
Revert back to yajl.

https://bugzilla.redhat.com/show_bug.cgi?id=1614569Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>

This reverts commit 01ce0437.

Jansson cannot parse QEMU's quirky JSON.
Revert back to yajl.

https://bugzilla.redhat.com/show_bug.cgi?id=1614569Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>