Currently CPU controller cannot be enabled if there is any real-time
task running and is assigned to non-root cgroup which is the case on
several distributions with graphical environment.

Instead of erroring out treat it as the controller is not available.
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>
Reviewed-by: NPeter Krempa <pkrempa@redhat.com>

In order to skip controllers that we are not able to activate we need
to return different return value so the caller can decide what to do.
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>
Reviewed-by: NPeter Krempa <pkrempa@redhat.com>

It might happen that we are not able to enable CPU controller so we
can enable it for thread sub-cgroups only if it's available in parent
cgroup.
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

The assumption that CPU controller would be always enabled is wrong, we
should use any available controller to create a new sub-cgroup.
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

This affects only cgroups v2 where enabled controllers are not based on
available mount points but on the list provided in cgroup.controllers
file.  However, moving it will fill in placement as well, so it needs
to be freed together with mount point if we don't need that controller.

Before this patch we were assuming that all controllers available in
root cgroup where available in all other sub-cgroups which was wrong.

In order to fix it we need to move the cgroup controllers detection
after cgroup placement was prepared in order to build correct path for
cgroup.controllers file.
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>
Reviewed-by: NPeter Krempa <pkrempa@redhat.com>

In cgroups v2 we don't have to detect available controllers every single
time if we are creating a new cgroup based on parent cgroup.
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Our code would skip adding the default type in this cases, but since we
know that the only reasonable option here is 'fat' we can add it while
starting the VM.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

The storage volume may in fact convert into a directory when starting
the VM so that it may be actually possible to use it.

This is a regression caused by c9b27af3 as moving the check to
validation time without adjustment causes problems as the volumes are
not translated yet.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

qemuBuildDriveSourceStr omits the disk format string when we are
emulating a 'fat' filesystem from a directory. The logic should decide
based on the 'actualType' as a disk type=pool may be converted to a
directory.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

virStorageSourceGetActualType would return VIR_STORAGE_TYPE_NONE in case
when a virStorageSource of (top level) type VIR_STORAGE_TYPE_VOLUME was
not prepared to use by the vm by calling
virDomainDiskTranslateSourcePool.

Fix this issue by returning VIR_STORAGE_TYPE_VOLUME in case when the
volume was not translated yet.

Additionally also add documentation for the function describing the
quirk.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

We didn't do this earlier because the DO_TEST_CAPS_ARCH_LATEST()
macro was limited to qemuxml2argv until recently.
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Support for this has only relatively recently been added to
virt-manager.
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Use the latest virt-manager to regenerate the files.

The command line is once again along the lines of

  $ virt-install \
    --name guest --os-variant fedora29 \
    --vcpus 4 --memory 4096 --disk size=5 \
    --graphics (none|vnc) \
    --print-xml

with some minor tweaks performed afterwards.

This removes a number of inconsistencies between the files,
and makes it so the only differences are actually relevant
either to the architecture and machine type at hand, or to
having graphics rather than being headless.
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Right now *-headless and *-graphics tests are using different
quoting styles, which results in the diff between them being
basically useless, whereas we would like it to be possible to
compare these files directly and easily spot the differences.

Convert all *-graphics tests to single quotes, which is the
style libvirt itself uses when formatting XML: this is a fact
that will come in handy later.
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

The field is set just before returning on success.
Signed-off-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>
Signed-off-by: NJán Tomko <jtomko@redhat.com>

Signed-off-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>
Signed-off-by: NJán Tomko <jtomko@redhat.com>

Signed-off-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>
Signed-off-by: NJán Tomko <jtomko@redhat.com>

When changing media using blockdev-add we need to remove the leftovers
if we didn't succeed plugging in the full chain or closing the tray.
Otherwise the data structures will be freed and thus the backing chain
members will never be unplugged.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

As this conversion removes the last use of qemuHotplugDiskSource*
functions we can remove all of them now.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Use the new helpers for removing the backing chain in case when
-blockdev is used. For -drive this function has a local implementation.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Replace the use of qemuHotplugDiskSourceAttach* helpers with
qemuBuildStorageSourceChainAttachPrepare(Blockdev|Drive).
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Replace the open-coded local implementation with
qemuBuildStorageSourceChainAttachPrepare(Drive|Blockdev).
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

These are meant to replace the ad-hoc helpers qemuHotplugDiskSourceAttach...
and the open-coded version in qemu_command.c for use in command line
generation.

The functions for preparing for attach of chains unfortunately need to
be in qemu_command.c as they use function defined by that file and
inclusion hierarchy.

In this patch new functions are introduced and subsequent patches then
refactor individual parts to use them.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

We use only one copy-on-read filter per disk, so we should handle it
separately from the chain.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Move it to qemu_block.c and call it qemuBlockStorageSourceDetachPrepare.
It will be reused in other parts as well.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

We've deprecated qemuConnectDomainXMLFromNative qemuDomainQemuAttach.
Switch the error code from VIR_ERR_OPERATION_UNSUPPORTED to the new
VIR_ERR_DEPRECATED.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Allow a simple programatic check that a given feature is no longer
supported by introducing a separate error code for this scenario.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Commit a7fb2258 added sanitization of storage pool target paths,
however source dir paths were left unsanitized.

A netfs pool with:
<source>
  <host name='10.20.30.40'/>
  <dir path='/nfs/'/>
</source>
will not be correctly detected as mounted by
virStorageBackendFileSystemIsMounted, because it shows up in the
mount list without the trailing slash.

Sanitize the source dir as well.

https://bugzilla.redhat.com/show_bug.cgi?id=1723247Signed-off-by: NJán Tomko <jtomko@redhat.com>
Acked-by: NPeter Krempa <pkrempa@redhat.com>

The function modifies the context but did not care to restore it back.
If a <seclabel> was used on a disk, the <privateData> would not be
parsed.

Use VIR_XPATH_NODE_AUTORESTORE and add a test case to validate that
everything works.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Add omitted comma for multiple hosts.
Fixes: cdd362e0Signed-off-by: NYi Li <yili@winhong.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>
Signed-off-by: NJán Tomko <jtomko@redhat.com>

Commit 9c9620af called x86DataAdd without checking for an error,
so add the error checking.

Found by Coverity
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

Commit 56b254dc called virCPUx86DataAdd, but returned -1 directly
without calling the virCPUx86DataFree.

Found by Coverity.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

Trivial change. Adding the name of the device that has an
unknown PCI header type in that function helps when debugging
PCI code.
Signed-off-by: NDaniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>

Commit 7bf679ae removed the @json argument from the qemuMonitorOpen
prototype; however, it did not update the ATTRIBUTE_NONNULL value
which causes a build failure for when checking is enabled such as
when lv_cv_static_analysis is enabled.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Fixes: c08fc8d1Signed-off-by: NEric Blake <eblake@redhat.com>

In the virStorageSourceChainHasManagedPR() function we iterate
over whole backing chain trying to determine if one of the layers
has managed PR configured. But due to a typo we in fact check the
top layer only.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

The files for libvirt-net-rpc-server.la refernce the sasl/sasl.h
system header but never used the $(SASL_CFLAGS) variable. This
was never noticed previously because the $(AVAHI_CLFAGS) were
set and these typically pulled in the same include directory.

When mDNS/Avahi support was removed this exposed the bug which
caused FreeBSD builds to break as /usr/local/include was no
longer searched for headers.
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>