Two complaints of RESOURCE_FREE due to going to cleanup prior to a
VIR_FREE(line).  Two complaints of FORWARD_NULL due to 'tmp' being
accessed after a strchr() without first checking if the return was NULL.

While looking at the code it seems that 'line' need only be allocated
once as the while loop will keep reading into line until eof causing
an unreported leak since line was never VIR_FREE()'d at the bottom of
the loop.

<hyperv>
  <spinlocks state='off'/>
</hyperv>

results in:
error: XML error: missing HyperV spinlock retry count

Don't require retries when state is off and use virXPathUInt
instead of virXPathString to simplify parsing.

https://bugzilla.redhat.com/show_bug.cgi?id=784836#c19

Implement check whether (maximum) vCPUs doesn't exceed machine
type's cpu-max settings.

On older versions of QEMU the check is disabled.
Signed-off-by: NMichal Novotny <minovotn@redhat.com>

Implicit controllers may be dependent on device definitions altered
in a post-parse callback. Specifically, if a console device is
defined without the target type, the type will be set in QEMU's
callback. In the case of s390, this is virtio, which requires
an implicit virtio-serial controller.
Signed-off-by: NViktor Mihajlovski <mihajlov@linux.vnet.ibm.com>

For s390 the default console target type is virtio. This also requires
that an implicit virtio-serial controller is instantiated.
This testcase verifies that the target type of virtio is correctly set
in the generated XML if no target element was given and that the
corresponding virtio-serial element is generated too.
Signed-off-by: NViktor Mihajlovski <mihajlov@linux.vnet.ibm.com>

This includes adding it to the nodedev parser and formatter, docs, and
test.

An example of the new iommuGroup element that is a part of the output
from "virsh nodedev-dumpxml" (virNodeDeviceGetXMLDesc()):

  <device>
    <name>pci_0000_02_00_1</name>
    <capability type='pci'>
    ...
      <iommuGroup number='12'>
        <address domain='0x0000' bus='0x02' slot='0x00' function='0x0'/>
        <address domain='0x0000' bus='0x02' slot='0x00' function='0x1'/>
      </iommuGroup>
    </capability>
  </device>

commit 0fc12bca added a new test called qemuhotplugtest which has
several data files in tests/qemuhotplugtestdata, but didn't add that
directory to EXTRA_DIST in the tests Makefile.am, so the make check
done during a make rpm was failing due to missing data files.

As my punishment for the break in 7f15ebc7 (fixed in 752596b5) I'm
introducing this test to make sure it won't happen again. Currently,
only test for <graphics/> is supported.

This patch adds functionality to allow libvirt to configure the
'native-tagged' and 'native-untagged' modes on openvswitch networks.
Signed-off-by: NLaine Stump <laine@redhat.com>

Add -o compat= and -o lazy_refcounts options for qemu-img.

Add <features> and <compat> elements to volume target XML.

<compat> is a string which for qcow2 represents the QEMU version
it should be compatible with. Valid values are 0.10 and 1.1.
1.1 is implicit if the <features> element is present, otherwise
qemu-img default is used. 0.10 can be specified to explicitly
create older images after the qemu-img default changes.

<features> contains optional features, so far
<lazy_refcounts/> is available, which enables caching of reference
counters, improving performance for snapshots.

XML:
<features>
  <hyperv>
    <vapic state='on'/>
    <spinlocks state='on' retries='4096'/>
  </hyperv>
</features>

results in the following QEMU command line:
qemu -cpu <cpu_model>,hv_vapic,hv_spinlocks=0x1000

https://bugzilla.redhat.com/show_bug.cgi?id=784836

We don't care whether the trim was succesful or not anywhere
except the tests.

Switch it to void and set the buffer error on wrong usage.

This fixes a crash:
https://bugzilla.redhat.com/show_bug.cgi?id=969878

This internal API checks, if passed address is a wildcard address.

Found with 'git grep "= 1"'.

Currently, a listen address for a SPICE server can be specified. Later,
when the domain is migrated, we need to relocate the graphics which
involves telling new destination to the SPICE server. However, we can't
just assume the listen address is the new location, because the listen
address can be ANYCAST (0.0.0.0 for IPv4, :: for IPv6). In which case,
we want to pass the remote hostname. But there are some troubles with
ANYCAST. In both IPv4 and IPv6 it has many ways for specifying such
address. For instance, in IPv4: 0, 0.0, 0.0.0, 0.0.0.0.  The number of
variations gets bigger in IPv6 world. Hence, in order to check for
ANYCAST address sanely, we should take the provided listen address,
parse it and format back in it's full form. Which is exactly what this
patch does.

If the creation of the commandline failed, libvirt always reported "out
of memory" from the virCommandToString function rather than the proper
error that happened in virStorageBackendCreateQemuImgCmd. Error out
earlier.

With unknown good reasons, the attribute "bus" of scsi device
address is always set to 0, same for attribute "target". (See
virDomainDiskDefAssignAddress).

Though we might need to change the algorithm to honor "bus"
and "target" too, that's a different issue. The address generator
for scsi host device in this patch just follows the unknown
good reasons, only considering the "controller" and "unit".
It walks through all scsi controllers and their units, to see
if the address $controller:0:0:$unit can be used (if not used
by any disk or scsi host device yet), if found one, it sits on
it, otherwise, it creates a new controller (actually the controller
is implicitly created by someone else), and sits on
$new_controller:0:0:0 instead.

A mingw build (where the qemu driver is not built, so WITH_QEMU
is undefined) failed with:

In file included from ../../src/qemu/qemu_command.h:30:0,
                 from ../../tests/testutilsqemu.h:4,
                 from ../../tests/networkxml2xmltest.c:14:
../../src/qemu/qemu_conf.h:53:4: error: #error "Port me"

But since testutilsqemu.c is already conditional, the header
should be likewise.

* tests/testutilsqemu.h: Make content conditional.
Signed-off-by: NEric Blake <eblake@redhat.com>

We can't use GNULIB's fprintf-posix due to licensing
incompatibilities. We do already have a portable
formatting via virAsprintf() which we got from GNULIB
though. We can use to create a virFilePrintf() function.

But really gnulib could just provide a 'fprintf'
module, that depended on just its 'asprintf' module.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

It may shorten the code a bit as the following pattern:

  VIR_STRNDUP(dst, src, cond ? n : strlen(src))

is used on several places among our code. However, we can
move the strlen into virStrndup and thus write just:

  VIR_STRNDUP(dst, src, cond ? n : -1)

Currently, the controllers argument to virCgroupDetect acts both as
a result filter and a required controller specification, which is
a bit overloaded. If both functionalities are needed, it would be
better to have them seperated into a filter and a requirement mask.
The only situation where it is used today is to ensure that only
CPU related controllers are used for the VCPU directories. But here
we clearly do not want to enforce the existence of cpu, cpuacct and
specifically not cpuset at the same time.
This commit changes the semantics of controllers to "filter only".
Should a required mask ever be needed, more work will have to be done.
Signed-off-by: NViktor Mihajlovski <mihajlov@linux.vnet.ibm.com>

This attribute is going to represent number of queues for
multique vhost network interface. This commit implements XML
extension part of the feature and add one test as well. For now,
we can only do xml2xml test as qemu command line generation code
is not adapted yet.

example: qemu ${otherargs} \
             -vnc 127.0.0.1:0,share=allow-exclusive

QEMU_CAPS_VNC_SHARE_POLICY (qemu >= 1.1)

The shunloadStart function didn't check the status of virInitialize which
was flagged by Coverity.  Adjust the function and shunloadtest in order
to handle the situation.

The return from virInitialize() needs to be checked.

Several files called out COPYING or COPYING.LIB instead of using
the normal boilerplate.  It's especially important that we don't
call out COPYING from an LGPL file, since COPYING is traditionally
used for the GPL.  A few files were lacking copyright altogether.

* src/rpc/gendispatch.pl: Add missing copyright.
* Makefile.nonreentrant: Likewise.
* src/check-symfile.pl: Likewise.
* src/check-symsorting.pl: Likewise.
* src/driver.h: Likewise.
* src/internal.h: Likewise.
* tools/libvirt-guests.sh.in: Likewise.
* tools/virt-pki-validate.in: Mention copyright in comment, not just code.
* tools/virt-sanlock-cleanup.in: Likewise.
* src/rpc/genprotocol.pl: Spell out license terms.
* src/xen/xend_internal.h: Likewise.
* src/xen/xend_internal.c: Likewise.
* Makefile.am: Likewise.
* daemon/Makefile.am: Likewise.
* docs/Makefile.am: Likewise.
* docs/schemas/Makefile.am: Likewise.
* examples/apparmor/Makefile.am: Likewise.
* examples/domain-events/events-c/Makefile.am: Likewise.
* examples/dominfo/Makefile.am: Likewise.
* examples/domsuspend/Makefile.am: Likewise.
* examples/hellolibvirt/Makefile.am: Likewise.
* examples/openauth/Makefile.am: Likewise.
* examples/python/Makefile.am: Likewise.
* examples/systemtap/Makefile.am: Likewise.
* examples/xml/nwfilter/Makefile.am: Likewise.
* gnulib/lib/Makefile.am: Likewise.
* gnulib/tests/Makefile.am: Likewise.
* include/Makefile.am: Likewise.
* include/libvirt/Makefile.am: Likewise.
* python/Makefile.am: Likewise.
* python/tests/Makefile.am: Likewise.
* src/Makefile.am: Likewise.
* tests/Makefile.am: Likewise.
* tools/Makefile.am: Likewise.
* configure.ac: Likewise.
Signed-off-by: NEric Blake <eblake@redhat.com>

Since 0d70656a, it starts to access the sysfs files to build
the qemu command line (by virSCSIDeviceGetSgName, which is to find
out the scsi generic device name by adpater:bus:target:unit), there
is no way to work around, qemu wants to see the scsi generic device
like "/dev/sg6" anyway.

And there might be other places which need to access sysfs files
when building qemu command line in future.

Instead of increasing the arguments of qemuBuildCommandLine, this
introduces a new callback for qemuBuildCommandLine, and thus tests
can register their own callbacks for sysfs test input files accessing.

* src/qemu/qemu_command.h: (New callback struct
                            qemuBuildCommandLineCallbacks;
                            extern buildCommandLineCallbacks)
* src/qemu/qemu_command.c: (wire up the callback struct)
* src/qemu/qemu_driver.c: (Use the new syntax of qemuBuildCommandLine)
* src/qemu/qemu_hotplug.c: Likewise
* src/qemu/qemu_process.c: Likewise
* tests/testutilsqemu.[ch]: (Helper testSCSIDeviceGetSgName;
                             callback struct testCallbacks;)
* tests/qemuxml2argvtest.c: (Use testCallbacks)
* src/tests/qemuxmlnstest.c: (Like above)

Running make check in a VPATH configured build directory fails
in fchosttest as the test data files are searched for relative to
the current working directory.
Signed-off-by: NViktor Mihajlovski <mihajlov@linux.vnet.ibm.com>

We don't parse it anyway.

https://bugzilla.redhat.com/show_bug.cgi?id=893273

Make target path mandatory for pool types that require target,
since we refuse to parse a target without a path.

https://bugzilla.redhat.com/show_bug.cgi?id=893273

QEMU might support more values for "-drive discard", so using Bi-state
values (on/off) for it doesn't make sense.

"on" maps to "unmap", "off" maps to "ignore":

<...>
@var{discard} is one of "ignore" (or "off") or "unmap" (or "on") and
controls whether @dfn{discard} (also known as @dfn{trim} or @dfn{unmap})
requests are ignored or passed to the filesystem.  Some machine types
may not support discard requests.
</...>

"sgio" is only valid for scsi host device.