Introduce the handler for finalizing a block pull job which will allow
to use it with blockdev.

This patch also contains some additional machinery which is required to
store all the relevant job data in the status XML which will also be
reused with other block job types.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

qemuBlockJobRewriteConfigDiskSource rewrites the disk source only
according to the 'target'. This means that if someone would change the
inactive config of the VM to refer to a different disk a block job would
rewrite it when finishing a job which modifies the disk source.

Make sure that this does not happen by verifying that the source of the
config disk is the same.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
ACKed-by: NEric Blake <eblake@redhat.com>

Since we copy everything from the original storage source including some
runtime data which are not relevant for the config we should clear them.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
ACKed-by: NEric Blake <eblake@redhat.com>

Both active block commit and block copy modify the disk source of the
active definition and thus also must modify the corresponding inactive
definition source so that the VM starts up later. This is currently
implemented in the legacy block job handler but the logic will be useful
also for the new handlers. Split it out which also simplifies it.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
ACKed-by: NEric Blake <eblake@redhat.com>

The <mirror> subelement is used in two ways: in a commit job to point to
existing storage, and in a block-copy job to point to additional
storage. We need a way to track only the distinct storage.

This patch introduces qemuBlockJobDiskRegisterMirror which registers the
mirror chain separately only for jobs which require it. This also comes
with remembering that in the status XML.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
ACKed-by: NEric Blake <eblake@redhat.com>

Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
ACKed-by: NEric Blake <eblake@redhat.com>

Commit c4123837 used a value from wrong enum when setting the disk's
mirrorState variable. This meant that a 'READY' job would show up as
'PIVOTING'.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
ACKed-by: NEric Blake <eblake@redhat.com>

When returning to asynchronous block job handling the flag which
determines the handling method should be reset prior to flushing
outstanding events. If there's an event to process the handler may
invoke the monitor and another event may be received. We'd not process
that one. Reset the flag earlier.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Set the correct job states after the operation is requested in qemu.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

When initiating a pivot or abort of a block job we need to track which
one was initiated. Currently it was done via data stashed in
virDomainDiskDef. Add possibility to track this also together with the
job itself.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

In cases when the disk frontend was unplugged while a blockjob was
running the blockjob inherits the backing chain. When the blockjob is
then terminated we need to unplug the chain as it will not be used any
more.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

When the guest unplugs the disk frontend libvirt is responsible for
deleting the backend. Since a blockjob may still have a reference to the
backing chain when it is running we'll have to store the metadata for
the unplugged disk for future reference.

This patch adds 'chain' and 'mirrorChain' fields to 'qemuBlockJobData'
to keep them around with the job along with status XML machinery and
tests. Later patches will then add code to change the ownership of the
chain when unplugging the disk backend.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Refresh the state of the jobs and process any events that might have
happened while libvirt was not running.

The job state processing requires some care to figure out if a job
needs to be bumped.

For any invalid job try doing our best to cancel it.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Add the infrastructure to handle block job events in the -blockdev era.

Some complexity is required as qemu does not bother to notify whether
the job was concluded successfully or failed. Thus it's necessary to
re-query the monitor.

To minimize the possibility of stuck jobs save the state into the XML
prior to handling everything so that the reconnect code can potentially
continue with the cleanup.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

This new state is entered when qemu finished the job but libvirt does
not know whether it was successful or not.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Now that the blockjob handling code deals with the status XML we don't
need to save it explicitly when starting blockjobs.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Now that block job data is stored in the status XML portion we need to
make sure that everything which changes the state also saves the status
XML. The job registering function is used while parsing the status XML
so in that case we need to skip the XML saving.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

When parsing the status XML we need to register all existing jobs.
Export the functions so that they are usable in other modules.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Later on we'll format these values into the status XML so the from/to
string functions will come handy. The implementation also notes that
these will be used in the status XML to avoid somebody changing the
values.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Add the job structure to the table when instantiating a new job and
remove it when it terminates/fails.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

The legacy job handler does not look at the old job state so we can
update it earlier.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

There's no need to do it if the job is not completed. The new helper
allows to do this with much less hassle in the correct place.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Rename and move qemuBlockJobTerminate to qemuBlockJobUnregister and
separate bits from qemuBlockJobDiskNew which register the job with the
disk. This creates an unified interface for other APIs to use.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Simplify error paths.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

With -blockdev it will be possible that a block job loses the disk that
was used to start it to a guest-initiated hot-unplug. Don't emit the
block job events in that case as we can't report the top level source or
disk target for an unplugged (and potentially replugged with different
source) disk.

Eventually when we add machinery for tracking jobs globally for a VM the
event will be reinstated via the domain job event.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

job->newstate is now used internally all the time so there's no need to
clear it as it already has correct value.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NCole Robinson <crobinso@redhat.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>

Since c2573527 a reference of 'cfg' would be leaked if the function
does not need to process anything. Fix it by using VIR_AUTOUNREF.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Commit c2573527 introduced a logic bug where we will never save the
inactive XML after a blockjob as the variable which was determining
whether to do so is cleared right before. Thus even if we correctly
modify the inactive state it will be rolled back when libvirtd is
restarted.
Reported-by: NThomas Stein <hello@himbee.re>
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Now that virStorageSource is a subclass of virObject we can use
virObjectUnref and remove virStorageSourceFree which was a thin wrapper.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NErik Skultety <eskultet@redhat.com>

Missing semicolon at the end of macros can confuse some analyzers
(like cppcheck <filename>). VIR_ONCE_GLOBAL_INIT is almost
exclusively called without an ending semicolon, but let's
standardize on using one like the other macros.

Add a dummy struct definition at the end of the macro, so
the compiler will require callers to add a semicolon.
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>
Signed-off-by: NCole Robinson <crobinso@redhat.com>

When we need to detect a chain for a image which will become the new
source for a disk (e.g. after a disk media change or a blockjob) we'd
need to replace disk->src temporarily to do so.

Move the 'disksrc' temporary variable to an argument and adjust callers.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Switching a block job to some states (e.g. QEMU_BLOCKJOB_STATE_READY)
might not require a job, thus if it will become ready asynchronously we
should not overwrite the state any more.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

While the callers should make sure that they don't call
qemuBlockJobEmitEvents for any internal state or job, let's add checks
that prevents us from emitting wrong events altogether.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Currently the job name corresponds to the disk the job belongs to. For
jobs which will not correspond to disks we'll need to track the name
separately.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

And rename it in accordance with the change.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Rather than storing the presence of the blockjob in a flag we can bind
together the lifecycle of the job with the lifecycle of the object which
is tracking the data for it.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Instead of passing in the disk information, pass in the job and name the
function accordingly.

Few callers needed to be modified to have the job pointer handy.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

The processing function modifies the job state so it should make sure
that the variable holding the new state is cleared properly and not the
caller. The caller should only deal with the job state and not the
transition that happened.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>