- 02 10月, 2009 2 次提交
-
-
由 Paolo Bonzini 提交于
Fix migration, broken in two different ways by the QEMU monitor abstraction. Note that the QEMU console emits a "\r\n" as the line-ending. * src/qemu/qemu_monitor_text.c (qemuMonitorGetMigrationStatus): Fix "info migrate" command and its output's parsing.
-
由 Chris Lalancette 提交于
Implementation of tunnelled migration, using a Unix Domain Socket on the qemu backend. Note that this requires very new versions of qemu (0.10.7 at least) in order to get the appropriate bugfixes. Signed-off-by: NChris Lalancette <clalance@redhat.com>
-
- 01 10月, 2009 5 次提交
-
-
由 Paolo Bonzini 提交于
Fix a few mispellings :-) of "successfully" and regenerate docs/libvirt-*.xml. * src/libvirt.c: Fix typos. * src/secret/secret_driver.c: Fix typos. * docs/libvirt-api.xml: Regenerate. * docs/libvirt-refs.xml: Regenerate.
-
由 Chris Lalancette 提交于
The upcoming tunnelled migration needs to be able to set a migration in progress in the background, as well as be able to cancel a migration when a problem has happened. This patch allows for both of these to properly work. Signed-off-by: NChris Lalancette <clalance@redhat.com>
-
由 Mark McLoughlin 提交于
A simple misplaced break out of a switch results in: libvir: error : Failed to open file '/sys/bus/pci/devices/0000:00:54c./vendor': No such file or directory libvir: error : Failed to open file '/sys/bus/pci/devices/0000:00:54c./device': No such file or directory libvir: error : this function is not supported by the hypervisor: Failed to read product/vendor ID for 0000:00:54c. when trying to passthrough a USB host device to qemu. * src/security_selinux.c: fix a switch/break thinko
-
由 Daniel Veillard 提交于
* src/conf/domain_conf.c: a simple typo in an XML domain file could lead to a crash, because we called STRPREFIX() on the looked up value without checking it was non-null.
-
由 Florian Vichot 提交于
* src/conf/domain_conf.c: when declaring a <interface type="bridge"> tag, <source> needs a "bridge" attribute, but the parser complains about a missing "dev" attribute.
-
- 30 9月, 2009 11 次提交
-
-
由 Daniel Veillard 提交于
* docs/schemas/domain.rng: allow one <description> tag in the top level of the <domain> to store user information as text * src/conf/domain_conf.c src/conf/domain_conf.h: extend the structure to store this text, grab it at parse time and save it back when present after <uuid>
-
由 Chris Lalancette 提交于
Signed-off-by: NChris Lalancette <clalance@redhat.com>
-
由 Chris Lalancette 提交于
Signed-off-by: NChris Lalancette <clalance@redhat.com>
-
由 Chris Lalancette 提交于
Signed-off-by: NChris Lalancette <clalance@redhat.com>
-
由 Matthias Bolte 提交于
Function comments for virStreamEvent{Add,Update,Remove}Callback() are missing a trailing ':'. Therefore apibuild.py fails to parse the comment and warns about the missing ':'. * docs/libvirt-api.xml, docs/libvirt-refs.xml: updated by apibuild.py * src/libvirt.c: add missing ':' in function comments
-
由 Mark McLoughlin 提交于
Use virStorageFileGetMetadata() to find any backing stores for images and re-label them Without this, qemu cannot access qcow2 backing files, see: https://bugzilla.redhat.com/497131 * src/security/security_selinux.c: re-label backing store files in SELinuxSetSecurityImageLabel()
-
由 Mark McLoughlin 提交于
* src/util/storage_file.c: add virStorageFileGetMetadata() so that the caller does not need to open the file
-
由 Mark McLoughlin 提交于
Finally, we get to the point of all this. Move virStorageGetMetadataFromFD() to virStorageFileGetMetadataFromFD() and move to src/util/storage_file.[ch] There's no functional changes in this patch, just code movement * src/storage/storage_backend_fs.c: move code from here ... * src/util/storage_file.[ch]: ... to here * src/libvirt_private.syms: export virStorageFileGetMetadataFromFD()
-
由 Mark McLoughlin 提交于
Introduce a metadata structure and make virStorageGetMetadataFromFD() fill it in. * src/util/storage_file.h: add virStorageFileMetadata * src/backend/storage_backend_fs.c: virStorageGetMetadataFromFD() now fills in the virStorageFileMetadata structure
-
由 Mark McLoughlin 提交于
Prepare the code probing a file's format and associated metadata for moving into libvirt_util. * src/storage/storage_backend_fs.c: re-factor the format and metadata probing code in preparation for moving it
-
由 Mark McLoughlin 提交于
Rename virStorageVolFormatFileSystem to virStorageFileFormat and move to src/util/storage_file.[ch] * src/Makefile.am: add src/util/storage_file.[ch] * src/conf/storage_conf.[ch]: move enum from here ... * src/util/storage_file.[ch]: .. to here * src/libvirt_private.syms: update To/FromString exports * src/storage/storage_backend.c, src/storage/storage_backend_fs.c, src/vbox/vbox_tmpl.c: update for above changes
-
- 29 9月, 2009 22 次提交
-
-
由 Pritesh Kothari 提交于
* src/vbox/vbox_tmpl.c: the vboxDomainDestroy forgot to wait for completion of the PowerDown command
-
由 Daniel P. Berrange 提交于
* src/libvirt.c: Remove hand-crafted UUID parsers in favour of calling virParseUUID
-
由 Daniel P. Berrange 提交于
When using VNC for graphics + keyboard + mouse, we shouldn't then use the host OS for audio. Audio should go back over VNC. When using SDL for graphics, we should use the host OS for audio since that's where the display is. We need to allow certain QEMU env variables to be passed through to guest too to allow choice of QEMU audio backend. * qemud/libvirtd.sysconf: Mention QEMU/SDL audio env vars * src/qemu_conf.c: Passthrough QEMU/SDL audio env for SDL display, disable host audio for VNC display
-
由 Daniel P. Berrange 提交于
* src/remote_internal.c: Add helper APIs for processing data streams
-
由 Daniel P. Berrange 提交于
Defines the extensions to the remote protocol for generic data streams. Adds a bunch of helper code to the libvirtd daemon for working with data streams. * daemon/Makefile.am: Add stream.c/stream.h to build * daemon/stream.c, qemud/stream.h: Generic helper functions for creating new streams, associating streams with clients, finding existing streams for a client and removing/deleting streams. * src/remote/remote_protocol.x: Add a new 'REMOTE_STREAM' constant for the 'enum remote_message_type' for encoding stream data in wire messages. Add a new 'REMOTE_CONTINUE' constant to 'enum remote_message_status' to indicate further data stream messsages are expected to follow. Document how the remote_message_header is used to encode data streams * src/remote/remote_protocol.h: Regenerate * daemon/dispatch.c: Remove assumption that a error message sent to client is always type=REMOTE_REPLY. It may now also be type=REMOTE_STREAM. Add convenient method for sending outgoing stream data packets. Log and ignore non-filtered incoming stream packets. Add a method for serializing a stream error message * daemon/dispatch.h: Add API for serializing stream errors and sending stream data packets * daemon/qemud.h: Add struct qemud_client_stream for tracking active data streams for clients. Tweak filter function operation so that it accepts a client object too. * daemon/qemud.c: Refactor code for free'ing message objects which have been fully transmitted into separate method. Release all active streams when client shuts down. Change filter function to be responsible for queueing the message
-
由 Daniel P. Berrange 提交于
* include/libvirt/libvirt.h.in: Public API contract for virStreamPtr object * src/libvirt_public.syms: Export data stream APIs * src/libvirt_private.syms: Export internal helper APIs * src/libvirt.c: Data stream API driver dispatch * src/datatypes.h, src/datatypes.c: Internal helpers for virStreamPtr object * src/driver.h: Define internal driver API for streams * .x-sc_avoid_write: Ignore src/libvirt.c because it trips up on comments including write() * python/Makefile.am: Add libvirt-override-virStream.py * python/generator.py: Add rules for virStreamPtr class * python/typewrappers.h, python/typewrappers.c: Wrapper for virStreamPtr * docs/libvirt-api.xml, docs/libvirt-refs.xml: Regenerate with new APIs
-
由 Pritesh Kothari 提交于
* src/vbox/vbox_tmpl.c: UTF-16 fixed version of Florian Vichot initial patch
-
由 Daniel P. Berrange 提交于
* src/qemu/qemu_driver.c: Fix crash in scenario where XML parsing of hotplugged device failed & thus 'dev' is NULL
-
由 Daniel P. Berrange 提交于
* src/qemu/qemu_monitor_text.c: Always print command and reply in qemuMonitorCommandWithHandler. Print all args in each monitor command API & remove redundant relpy printing
-
由 Daniel P. Berrange 提交于
* src/qemu/qemu_monitor_text.h: Remove qemudMonitorCommand, qemudMonitorCommandWithFd, qemudMonitorCommandWithHandler, qemudMonitorCommandExtra low level APIs * src/qemu/qemu_monitor_text.c: Replace s/qemud/qemuMonitor/
-
由 Daniel P. Berrange 提交于
* src/qemu/qemu_monitor.h, src/qemu/qemu_monitor.c: Add new qemuMonitorRemoveHostNetwork() command for removing host networks * src/qemu/qemu_driver.c: Convert NIC hotplug methods over to use qemuMonitorRemoveHostNetwork()
-
由 Daniel P. Berrange 提交于
* src/qemu/qemu_conf.h, src/qemu/qemu_conf.c: Remove prefix arg from qemuBuildHostNetStr which is no longer required * src/qemu/qemu_driver.c: Refactor to use qemuMonitorAddHostNetwork() API for adding host network * src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h: Add new qemuMonitorAddHostNetwork() method for adding host networks
-
由 Daniel P. Berrange 提交于
* src/qemu/qemu_conf.c: Remove separator from qemuBuildNicStr() args, and remove hardcoded 'nic' prefix. Leave it upto callers instead * src/qemu/qemu_driver.c: Switch over to using the new qemuMonitorAddPCINetwork() method for NIC hotplug * src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h: Add new qemuMonitorAddPCINetwork API for PCI network device hotplug
-
由 Daniel P. Berrange 提交于
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h: Add new qemuMonitorCloseFileHandle and qemuMonitorSendFileHandle APIs for processing file handles * src/qemu/qemu_driver.c: Convert NIC hotplug method over to use qemuMonitorCloseFileHandle and qemuMonitorSendFileHandle
-
由 Daniel P. Berrange 提交于
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h: Add new API qemuMonitorAddPCIDisk() * src/qemu/qemu_driver.c: Convert over to using the new qemuMonitorAddPCIDisk() method, and remove now obsolete qemudEscape() method
-
由 Daniel P. Berrange 提交于
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h: Add new API qemuMonitorRemovePCIDevice() for removing PCI device * src/qemu/qemu_driver.c: Convert all places removing PCI devices over to new qemuMonitorRemovePCIDevice() API
-
由 Daniel P. Berrange 提交于
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h: Add new API qemuMonitorAddPCIHostDevice() * src/qemu/qemu_driver.c: Switch to using qemuMonitorAddPCIHostDevice() for PCI host device hotplug
-
由 Daniel P. Berrange 提交于
One API adds an exact device based on bus+dev, the other adds any device matching vendor+product * src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h: Add new qemuMonitorAddUSBDeviceExact() and qemuMonitorAddUSBDeviceMatch() commands. * src/qemu/qemu_driver.c: Switch over to using the new qemuMonitorAddUSBDeviceExact() and qemuMonitorAddUSBDeviceMatch()
-
由 Daniel P. Berrange 提交于
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h: Add new qemuMonitorAddUSBDisk() API * src/qemu/qemu_driver.c: Switch USB disk hotplug to the new src/qemu/qemu_driver.c API.
-
由 Daniel P. Berrange 提交于
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h: Add new qemuMonitorMigrateToCommand() API * src/qemu/qemu_driver.c: Switch over to using the qemuMonitorMigrateToCommand() API for core dumps and save to file APIs
-
由 Daniel P. Berrange 提交于
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h: Add new API qemuMonitorMigrateToHost() for doing TCP migration * src/qemu/qemu_driver.c: Convert to use qemuMonitorMigrateToHost(). Also handle proper URIs (tcp:// as well as tcp:)
-
由 Daniel P. Berrange 提交于
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h: Add new qemuMonitorGetMigrationStatus() command. * src/qemu/qemu_driver.c: Use new qemuMonitorGetMigrationStatus() command to check completion status.
-