The compiler can warn us if we add a value to the
virDomainChrSerialTargetType enumeration but forget to handle
it properly in the code. Let's take advantage of that.

This commit is best viewed with 'git diff -w'.
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NPavel Hrdina <phrdina@redhat.com>

Add a separate capability for the sclplmconsole device, and check it
specifically instead of using QEMU_CAPS_DEVICE_SCLPCONSOLE for that too.
Signed-off-by: NPino Toscano <ptoscano@redhat.com>
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>

Give a better name to the capability for the sclpconsole device.
Signed-off-by: NPino Toscano <ptoscano@redhat.com>
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>

Up until now we assumed the spapr-vty device would always be
present, which is not very nice. Check for its availability before
using it instead.
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NPavel Hrdina <phrdina@redhat.com>

This set of rules was proposed by Christian Boltz <apparmor@cboltz.de>
on https://bugzilla.opensuse.org/show_bug.cgi?id=1065123.

Current cleanup processing is ad-hoc at best - it's led to a couple of
strange and hard to diagnose timing problems and crashes.

So rather than perform cleanup in a somewhat random order, let's
perform cleanup in the exact opposite order of startup.

NB: It is possible that virNetlinkEventServerStart fails and we jump
to cleanup before driversInitialized has been set. That could leave
things inconsistent; however, resolution of that possibility is perhaps
more trouble than it's worth to handle.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Let's be sure we can get a Daemon object before the server object.
This is a more "orderly" way to do things since the svr object would
be added to the dmn object afterwards.

Once we have forked the daemon successfully, let's claim the pidfile
immediately rather than waiting for setup of run_dir.

Signed-off-by: NMarc-André Lureau <marcandre.lureau@redhat.com>

Starting from qemu 2.11, the `-device vmcoreinfo` will create a fw_cfg
entry for a guest to store dump details, necessary to process kernel
dump with KASLR enabled and providing additional kernel details.

In essence, it is similar to -fw_cfg name=etc/vmcoreinfo,file=X but in
this case it is not backed by a file, but collected by QEMU itself.

Since the device is a singleton and shouldn't use additional hardware
resources, it is presented as a <feature> element in the libvirt
domain XML.

The device is arm/x86 only for now (targets that support fw_cfg+dma).

Related to:
https://bugzilla.redhat.com/show_bug.cgi?id=1395248Signed-off-by: NMarc-André Lureau <marcandre.lureau@redhat.com>

This doesn't add very much value for now, but future test for virresctrl will
take information from vircaps2xmldata (since it is dependent on the same info
then why duplicate it) and this particular use case helps us cover bit more of
the code regarding proper formatting and handling errors.  And one more test for
vircaps2xmltest doesn't hurt either.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

This patch modifies some not yet used test data so that the adding a test using
this data is a clean patch and not an addition of huge file with some
adjustments in small files that will be hidden in the middle of that commit.
These changes include:

- Add system dir in vircaps2xmldata/linux-caches

  Back when data for systems with resctrl support were added they had the
  /sys/fs/system directory put into a system/ subdir of the test and
  /sys/fs/resctrl in a resctrl/ subdir of that test.  However, if we also want a
  negative test for the resctrl (requesting allocation on a system that does not
  support resctrl), we need one a test case with any sensible (with cache info)
  system/ subdir and no resctrl/ one.  Easiest way is to add a
  system -> . symlink into existing test case.

- Change default group schemata for linux-resctrl and linux-resctrl-cdp

  That way we can fit some allocation in.

- Remove one cache from resctrl-skx's schemata and make some room for
  allocations

  That system already has only one cache, so that file was wrong anyway.  We
  have a version with 2 caches already (linux-resctrl-skx-twocaches), so this
  will also add variety to future tests.

- Add some empty allocation for resctrl-skx

  Just to have slightly more coverage and variety.  We can be sure nothing bad
  happens if such allocation exists in case we have that in the tests.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Because the cache banks are initialized based on the order in which their
respective directories exist on the filesystem, they can appear in different
order.  This is here mainly for tests because the cache directory might have
different order of children nodes and tests would fail otherwise.  It should not
be the case with sysfs, but one can never be sure.  And this does not take
almost any extra time, mainly because it gets initialized once per driver.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Sometimes the size of the bitmap matters and it might not be guessed correctly
when parsing from some type of input.  For example virBitmapNewData() has Byte
granularity, virBitmapNewString() has nibble granularity and so on.
virBitmapParseUnlimited() can be tricked into creating huge bitmap that's not
needed (e.g.: "0-2,^99999999").  This function provides a way to shrink the
bitmap.  It is not supposed to free any memory.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Already introduced in the past with 9479642f, but then renamed to
virBitmapIntersect by a908e9e4.  This time we'll really use it.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Our bitmaps can be represented as data (raw bytes for which we have
virBitmapNewData() and virBitmapToData()), human representation (list
of numbers in a string for which we have virBitmapParse() and
virBitmapFormat()) and hexadecimal string (for which we have only
virBitmapToString()).  So let's add the missing complement for the
last one so that we can parse hexadecimal strings.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Truncate the output so that it is only as big as is needed to fit all
the bits, not all the units from the map.  This will be needed in the
future in order to properly format bitmaps for kernel's sysfs files.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

It is literally only a wrapper around virBitmapNewData() and
virBitmapFormat(), only the naming was wrong since it was introduced.
And because we have virBitmap*String functions where the meaning of
the 'String' is constant, this might confuse someone.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

This follows the virBitmapToData() function and, similarly to
virBitmapNewData(), we'll be able to have virBitmapNewString() later
on without name confusion.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

We can't output better memory sizes if we want to be compatible with libvirt
older than the one which introduced /memory/unit, but for new things we can just
output nicer capacity to the user if available.  And this function enables that.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Currenty virTestInit() outputs all capabilities that it created when running
with VIR_TEST_DEBUG=1.  Since this is quite a lot of output for every call of
this function (and it is not needed until debugging a really deep-down issue)
let's just output the info when VIR_TEST_DEBUG is strictly greater than 1.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>
Reviewed-by: NPavel Hrdina <phrdina@redhat.com>

If _CFLAGS for a binary is not specified it uses AM_CFLAGS.  So doing

  $binary_CFLAGS = $(AM_CFLAGS)

or

  $binary_CFLAGS = $(AM_CFLAGS) $(something_that_is_already_in_AM_CFLAGS)

is pointless.  So remove it for cleaner Makefile.am
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Since update to glibc-2.26 removed the /usr/include/rpc/rpc.h we used until now,
it showed us a problem with not using XDR_CFLAGS properly.  On linux that
variable has usually -I/usr/include/tirpc because we already probe for it
properly, we just don't use it everywhere we need.  It is needed by wireshark
dissector as well as testutilsqemu.c (through includes) so the build fails with:

wireshark/src/packet-libvirt.c:33:10: fatal error: rpc/xdr.h: No such file or directory
 #include <rpc/xdr.h>
          ^~~~~~~~~~~

and

In file included from ../src/logging/log_manager.h:29:0,
                 from ../src/qemu/qemu_domain.h:40,
                 from testutilsqemu.c:11:
../src/logging/log_protocol.h:9:10: fatal error: rpc/rpc.h: No such file or directory
 #include <rpc/rpc.h>
          ^~~~~~~~~~~

Since lot of tests use testutilsqemu.c it is easier to add XDR_CFLAGS to
AM_CFLAGS than adding it to all $binary_CFLAGS.  It's just for tests and we
already have bunch of CFLAGS there anyway.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Commit 03d0959a introduced a compilation error in
src/xenconfig/xen_xl.c on ARM. Found by Xen's osstest

http://logs.test-lab.xenproject.org/osstest/logs/116216/build-armhf-libvirt/6.ts-libvirt-build.log

While we have collective knowledge about the support status of various
parts of libvirt, this has never been formally documented, leaving our
users to guess.

Note, this document makes one change to our previous policy. It explicitly
declares the RPC protocol of libvirtd as being a supported interface. THis
accepts the reality that we can a) never change it without breaking compat
with old libvirt.so, b) there are both rust + go impls that are written
against the RPC protocol already.
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>
Reviewed-by: NJim Fehlig <jfehlig@suse.com>
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

The XML namespace URI for the QEMU/LXC drivers must use http as the protocol
otherwise it won't match the parser's expectations.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Resolve a storage driver crash as a result of a long running
storageVolCreateXML when the virStorageVolPoolRefreshThread is
run as a result of when a storageVolUpload completed and ran the
virStoragePoolObjClearVols without checking if the creation
code was currently processing a buildVol after incrementing
the driver->asyncjob count.

The refreshThread will now check the pool asyncjob count before
attempting to pursue the pool refresh. Adjust the documentation
to describe the condition.

Crash from valgrind is as follows (with a bit of editing):

==21309== Invalid read of size 8
==21309==    at 0x153E47AF: storageBackendUpdateVolTargetInfo
==21309==    by 0x153E4C30: virStorageBackendUpdateVolInfo
==21309==    by 0x153E52DE: virStorageBackendVolRefreshLocal
==21309==    by 0x153DE29E: storageVolCreateXML
==21309==    by 0x562035B: virStorageVolCreateXML
==21309==    by 0x147366: remoteDispatchStorageVolCreateXML
...
==21309==  Address 0x2590a720 is 64 bytes inside a block of size 336 free'd
==21309==    at 0x4C2F2BB: free
==21309==    by 0x54CB9FA: virFree
==21309==    by 0x55BC800: virStorageVolDefFree
==21309==    by 0x55BF1D8: virStoragePoolObjClearVols
==21309==    by 0x153D967E: virStorageVolPoolRefreshThread
...
==21309==  Block was alloc'd at
==21309==    at 0x4C300A5: calloc
==21309==    by 0x54CB483: virAlloc
==21309==    by 0x55BDC1F: virStorageVolDefParseXML
==21309==    by 0x55BDC1F: virStorageVolDefParseNode
==21309==    by 0x55BE5A4: virStorageVolDefParse
==21309==    by 0x153DDFF1: storageVolCreateXML
==21309==    by 0x562035B: virStorageVolCreateXML
==21309==    by 0x147366: remoteDispatchStorageVolCreateXML
...

This is similar to the virDomainQemuMonitorCommand API, it can change
the domain state in a way that libvirt may not understand.
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

The 'set-lifcycle-action' is throwing a weird error after executing it with
the '--help' option. The command output is showing the options 'type' and
'action' are as optional, but they aren't. Both are required.

virsh # set-lifecycle-action --help
...
  SYNOPSIS
    set-lifecycle-action <domain> [--type <string>] [--action <string>] ...
...
  OPTIONS
    [--domain] <string>  domain name, id or uuid
error: internal error: bad options in command: 'set-lifecycle-action'

After applying this patch, both arguments are required now.

virsh # set-lifecycle-action --help
...
  SYNOPSIS
    set-lifecycle-action <domain> <type> <action> [--config] ...

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1509870Signed-off-by: NJulio Faracco <jcfaracco@gmail.com>

We need to call it anyway, so the else branch is redundant here.
Signed-off-by: NErik Skultety <eskultet@redhat.com>

We put the server into a hash table as we do with the other daemons,
there is no compelling reason why it should have another pointer
dedicated just to the server. Besides, the locking daemon doesn't have
it and virtlogd is essentially a copy paste of virtlockd.
Signed-off-by: NErik Skultety <eskultet@redhat.com>

In the definition of virHookQemuOpType and virHookNetworkOpType,
we should use 'stopped' rather than 'shutdown'.
Signed-off-by: NChen Hanxiao <chenhanxiao@gmail.com>

Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Most of the time it's okay to leave this up to negotiation between
the guest and the host, but in some situations it can be useful to
manually decide the behavior, especially to enforce its availability.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1308743Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>