https://bugzilla.redhat.com/show_bug.cgi?id=620363

When using -incoming stdio or -incoming exec:, qemu keeps the
stdin fd open long after the migration is complete.  Not to
mention that exec:cat is horribly inefficient, by doubling the
I/O and going through a popen interface in qemu.

The new -incoming fd: of qemu 0.12.0 closes the fd after using
it, and allows us to bypass an intermediary cat process for
less I/O.

* src/qemu/qemu_command.h (qemuBuildCommandLine): Add parameter.
* src/qemu/qemu_command.c (qemuBuildCommandLine): Support
migration via fd: when possible.  Consolidate migration handling
into one spot, now that it is more complex.
* src/qemu/qemu_driver.c (qemudStartVMDaemon): Update caller.
* tests/qemuxml2argvtest.c (mymain): Likewise.
* tests/qemuxml2argvdata/qemuxml2argv-restore-v2-fd.args: New file.
* tests/qemuxml2argvdata/qemuxml2argv-restore-v2-fd.xml: Likewise.

Support for this is included in qemu and seabios from upstream git.

Display or set unlimited values for memory parameters. Unlimited is
represented by INT64_MAX in memory cgroup.
Signed-off-by: NNikunj A. Dadhania <nikunj@linux.vnet.ibm.com>
Reported-by: NJustin Clift <jclift@redhat.com>

This is in response to a request in:

   https://bugzilla.redhat.com/show_bug.cgi?id=665293

In short, under heavy load, it's possible for qemu's networking to
lock up due to the tap device's default 1MB sndbuf being
inadequate. adding "sndbuf=0" to the qemu commandline -netdevice
option will alleviate this problem (sndbuf=0 actually sets it to
0xffffffff).

Because we must be able to explicitly specify "0" as a value, the
standard practice of "0 means not specified" won't work here. Instead,
virDomainNetDef also has a sndbuf_specified, which defaults to 0, but
is set to 1 if some value was given.

The sndbuf value is put inside a <tune> element of each <interface> in
the domain. The intent is that further tunable settings will also be
placed inside this element.

     <interface type='network'>
       ...
       <tune>
         <sndbuf>0</sndbuf>
       ...
       </tune>
     </interface>

This patch is in response to

  https://bugzilla.redhat.com/show_bug.cgi?id=643050

The existing libvirt support for the vhost-net backend to the virtio
network driver happens automatically - if the vhost-net device is
available, it is always enabled, otherwise the standard userland
virtio backend is used.

This patch makes it possible to force whether or not vhost-net is used
with a bit of XML. Adding a <driver> element to the interface XML, eg:

     <interface type="network">
       <model type="virtio"/>
       <driver name="vhost"/>

will force use of vhost-net (if it's not available, the domain will
fail to start). if driver name="qemu", vhost-net will not be used even
if it is available.

If there is no <driver name='xxx'/> in the config, libvirt will revert
to the pre-existing automatic behavior - use vhost-net if it's
available, and userland backend if vhost-net isn't available.

We try to use that command first when setting a VNC/SPICE password. If
that doesn't work we fallback to the legacy VNC only password

Allow an expiry time to be set, if that doesn't work, throw an error
if they try to use SPICE.

Change since v1:
- moved qemuInitGraphicsPasswords to qemu_hotplug, renamed
  to qemuDomainChangeGraphicsPasswords.
- updated what looks like a typo (that appears to work anyway) in
  initial patch from Daniel:
    - ret = qemuInitGraphicsPasswords(driver, vm,
    -                                 VIR_DOMAIN_GRAPHICS_TYPE_SPICE,
    -                                 &vm->def->graphics[0]->data.vnc.auth,
    -                                 driver->vncPassword);
    + ret = qemuInitGraphicsPasswords(driver, vm,
    +                                 VIR_DOMAIN_GRAPHICS_TYPE_SPICE,
    +                                 &vm->def->graphics[0]->data.spice.auth,
    +                                 driver->spicePassword);

Based on patch by Daniel P. Berrange <berrange@redhat.com>.

* src/conf/domain_conf.h (virDomainChrDeviceType): Drop monitor.
* src/conf/domain_conf.c (virDomainChrDevice)
(virDomainChrDefParseTargetXML, virDomainChrDefFormat): Drop
monitor support.
* src/qemu/qemu_command.h (qemuBuildCommandLine): Alter signature.
* src/qemu/qemu_monitor.h (qemuMonitorOpen): Likewise.
* src/qemu/qemu_domain.h (_qemuDomainObjPrivate): Change type of
monConfig.
* src/qemu/qemu_domain.c (qemuDomainObjPrivateFree)
(qemuDomainObjPrivateXMLFormat, qemuDomainObjPrivateXMLParse):
Adjust to type change.
* src/qemu/qemu_command.c (qemuBuildCommandLine): Likewise.
* src/qemu/qemu_driver.c (qemuPrepareMonitorChr)
(qemudStartVMDaemon, qemuDomainXMLToNative, qemuConnectMonitor)
(qemudShutdownVMDaemon): Likewise.
* src/qemu/qemu_hotplug.c (qemuDomainAttachNetDevice): Likewise.
* src/qemu/qemu_monitor.c (qemuMonitorOpen): Likewise.
* tests/qemuxml2argvtest.c (testCompareXMLToArgvFiles): Likewise.

This opens up the possibility of reusing the smaller ChrSourceDef
for both qemu monitor and a passthrough smartcard device.

* src/conf/domain_conf.h (_virDomainChrDef): Factor host
details...
(_virDomainChrSourceDef): ...into new struct.
(virDomainChrSourceDefFree): New prototype.
* src/conf/domain_conf.c (virDomainChrDefFree)
(virDomainChrDefParseXML, virDomainChrDefFormat): Split...
(virDomainChrSourceDefClear, virDomainChrSourceDefFree)
(virDomainChrSourceDefParseXML, virDomainChrSourceDefFormat):
...into new functions.
(virDomainChrDefParseTargetXML): Update clients to reflect type
split.
* src/vmx/vmx.c (virVMXParseSerial, virVMXParseParallel)
(virVMXFormatSerial, virVMXFormatParallel): Likewise.
* src/xen/xen_driver.c (xenUnifiedDomainOpenConsole): Likewise.
* src/xen/xend_internal.c (xenDaemonParseSxprChar)
(xenDaemonFormatSxprChr): Likewise.
* src/vbox/vbox_tmpl.c (vboxDomainDumpXML, vboxAttachSerial)
(vboxAttachParallel): Likewise.
* src/security/security_dac.c (virSecurityDACSetChardevLabel)
(virSecurityDACSetChardevCallback)
(virSecurityDACRestoreChardevLabel)
(virSecurityDACRestoreChardevCallback): Likewise.
* src/security/security_selinux.c (SELinuxSetSecurityChardevLabel)
(SELinuxSetSecurityChardevCallback)
(SELinuxRestoreSecurityChardevLabel)
(SELinuxSetSecurityChardevCallback): Likewise.
* src/security/virt-aa-helper.c (get_files): Likewise.
* src/lxc/lxc_driver.c (lxcVmStart, lxcDomainOpenConsole):
Likewise.
* src/uml/uml_conf.c (umlBuildCommandLineChr): Likewise.
* src/uml/uml_driver.c (umlIdentifyOneChrPTY, umlIdentifyChrPTY)
(umlDomainOpenConsole): Likewise.
* src/qemu/qemu_command.c (qemuBuildChrChardevStr)
(qemuBuildChrArgStr, qemuBuildCommandLine)
(qemuParseCommandLineChr): Likewise.
* src/qemu/qemu_domain.c (qemuDomainObjPrivateXMLFormat)
(qemuDomainObjPrivateXMLParse): Likewise.
* src/qemu/qemu_cgroup.c (qemuSetupChardevCgroup): Likewise.
* src/qemu/qemu_hotplug.c (qemuDomainAttachNetDevice): Likewise.
* src/qemu/qemu_driver.c (qemudFindCharDevicePTYsMonitor)
(qemudFindCharDevicePTYs, qemuPrepareChardevDevice)
(qemuPrepareMonitorChr, qemudShutdownVMDaemon)
(qemuDomainOpenConsole): Likewise.
* src/qemu/qemu_command.h (qemuBuildChrChardevStr)
(qemuBuildChrArgStr): Delete, now that they are static.
* src/libvirt_private.syms (domain_conf.h): New exports.
* cfg.mk (useless_free_options): Update list.
* tests/qemuxml2argvtest.c (testCompareXMLToArgvFiles): Update
tests.

* src/qemu/qemu_capabilities.h (qemuCapsParseDeviceStr): New
prototype.
* src/qemu/qemu_capabilities.c (qemuCapsParsePCIDeviceStrs)
Rename and split...
(qemuCapsExtractDeviceStr, qemuCapsParseDeviceStr): ...to make it
easier to add and test device-specific checks.
(qemuCapsExtractVersionInfo): Update caller.
* tests/qemuhelptest.c (testHelpStrParsing): Also test parsing of
device-related flags.
(mymain): Update expected flags.
* tests/qemuhelpdata/qemu-0.12.1-device: New file.
* tests/qemuhelpdata/qemu-kvm-0.12.1.2-rhel60-device: New file.
* tests/qemuhelpdata/qemu-kvm-0.12.3-device: New file.
* tests/qemuhelpdata/qemu-kvm-0.13.0-device: New file.

* src/qemu/qemu_capabilities.c (qemuCapsProbeMachineTypes)
(qemuCapsProbeCPUModels, qemuCapsParsePCIDeviceStrs)
(qemuCapsExtractVersionInfo): Use virCommand rather than virExec.

If the emulator doesn't support SDL graphic, we should reject
the use of SDL graphic xml with error messages, but not ignore
it silently, and pretend things are fine.

"-sdl" flag was exposed explicitly by qemu since 0.10.0, more detail:
http://www.redhat.com/archives/libvir-list/2011-January/msg00442.html

And we already have capability flag "QEMUD_CMD_FLAG_0_10", which
could be used to prevent the patch affecting the older versions
of QEMU.

* src/qemu/qemu_command.c

Skip IB700 when assigning PCI slots.

Note: the I6300ESB watchdog _is_ a PCI device.

To test this: I applied this patch to libvirt-0.8.3-2.fc14 (rebasing
it slightly: qemu_command.c didn't exist in that version) and
installed this on my machine, then tested that I could successfully
add an ib700 watchdog device to a guest, start the guest, and the
ib700 was available to the guest.  I also added an i6300esb (PCI)
watchdog to another guest, and verified that libvirt assigned a PCI
device to it, that the guest could be started, and that i6300esb was
present in the guest.

Note that if you previously had a domain with a ib700 watchdog, it
would have had an <address type='pci' .../> clause added to it in the
libvirt configuration.  This patch does not attempt to remove this.
You cannot start such a domain -- qemu gives an error if you try.
With this patch you are able to remove the bogus address element
without libvirt adding it back.
Signed-off-by: NRichard W.M. Jones <rjones@redhat.com>

The current security driver usage requires horrible code like

    if (driver->securityDriver &&
        driver->securityDriver->domainSetSecurityHostdevLabel &&
        driver->securityDriver->domainSetSecurityHostdevLabel(driver->securityDriver,
                                                              vm, hostdev) < 0)

This pair of checks for NULL clutters up the code, making the driver
calls 2 lines longer than they really need to be. The goal of the
patchset is to change the calling convention to simply

  if (virSecurityManagerSetHostdevLabel(driver->securityDriver,
                                        vm, hostdev) < 0)

The first check for 'driver->securityDriver' being NULL is removed
by introducing a 'no op' security driver that will always be present
if no real driver is enabled. This guarentees driver->securityDriver
!= NULL.

The second check for 'driver->securityDriver->domainSetSecurityHostdevLabel'
being non-NULL is hidden in a new abstraction called virSecurityManager.
This separates the driver callbacks, from main internal API. The addition
of a virSecurityManager object, that is separate from the virSecurityDriver
struct also allows for security drivers to carry state / configuration
information directly. Thus the DAC/Stack drivers from src/qemu which
used to pull config from 'struct qemud_driver' can now be moved into
the 'src/security' directory and store their config directly.

* src/qemu/qemu_conf.h, src/qemu/qemu_driver.c: Update to
  use new virSecurityManager APIs
* src/qemu/qemu_security_dac.c,  src/qemu/qemu_security_dac.h
  src/qemu/qemu_security_stacked.c, src/qemu/qemu_security_stacked.h:
  Move into src/security directory
* src/security/security_stack.c, src/security/security_stack.h,
  src/security/security_dac.c, src/security/security_dac.h: Generic
  versions of previous QEMU specific drivers
* src/security/security_apparmor.c, src/security/security_apparmor.h,
  src/security/security_driver.c, src/security/security_driver.h,
  src/security/security_selinux.c, src/security/security_selinux.h:
  Update to take virSecurityManagerPtr object as the first param
  in all callbacks
* src/security/security_nop.c, src/security/security_nop.h: Stub
  implementation of all security driver APIs.
* src/security/security_manager.h, src/security/security_manager.c:
  New internal API for invoking security drivers
* src/libvirt.c: Add missing debug for security APIs

The warning is bogus since strtok_r doesn't use the value when it's
first called and initializes it for the following calls.

When dynamic_ownership=0, saved images must be owned by the same uid
as is used to run the qemu process, otherwise restore won't work. To
accomplish this, qemuSecurityDACRestoreSavedStateLabel() needs to
simply return when it's called.

This fix is in response to:

  https://bugzilla.redhat.com/show_bug.cgi?id=661720

While doing some testing with Qemu and creating huge logfiles I encountered the case where the VM could not start anymore due to the lseek() to the end of the Qemu VM's log file failing. The patch below fixes the problem by replacing the previously used 'int' with 'off_t'.

To reproduce this error, you could do the following:

dd if=/dev/zero of=/var/log/libvirt/qemu/<name of VM>.log bs=1024 count=$((1024*2048))

and you should get an error like this:

error: Failed to start domain <name of VM>
error: Unable to seek to -2147482651 in /var/log/libvirt/qemu/<name of VM>.log: Success

* src/qemu/qemu_capabilities.h (QEMUD_CMD_FLAG_MIGRATE_QEMU_FD):
New enum value.
* src/qemu/qemu_capabilities.c (qemuCapsComputeCmdFlags): Populate
flags according to qemu version.
* tests/qemuhelptest.c (mymain): Adjust test.

This patch fixes https://bugzilla.redhat.com/show_bug.cgi?id=664406

If qemu is run as a different uid, it has been unable to access mode
0660 files that are owned by a different user, but with a group that
the qemu is a member of (aside from the one group listed in the passwd
file), because initgroups() is not being called prior to the
exec. initgroups will change the group membership of the process (and
its children) to match the new uid.

To make this happen, the setregid()/setreuid() code in
qemuSecurityDACSetProcessLabel has been replaced with a call to
virSetUIDGID(), which does both of those, plus calls initgroups.

Similar, but not identical, code in qemudOpenAsUID() has been replaced
with virSetUIDGID(). This not only consolidates the functionality to a
single location, but also potentially fixes some as-yet unreported
bugs.

Shorten qemuDomainSnapshotWriteSnapshotMetadata function name
and make it take a snapshot pointer instead of dealing with
the current snapshot. Update other functions accordingly.

Add a qemuDomainSnapshotReparentChildren hash iterator to
reparent the children of a snapshot that is being deleted. Use
qemuDomainSnapshotWriteMetadata to write updated metadata
to disk.

This fixes a problem where outdated parent information breaks
the snapshot tree and hinders the deletion of child snapshots.

Reported by Philipp Hahn.

Commit ed0d9f6c added support for
automatic port allocation for SPICE but forgot to mark such ports as
unused when they are not used anymore.

* daemon/Makefile.am: Avoid spurious space before tabs.
* src/Makefile.am: Likewise.
* examples/dominfo/Makefile.am: Likewise.
* examples/domsuspend/Makefile.am: Likewise.
* tools/Makefile.am: Likewise.
* src/datatypes.h (VIR_CONNECT_MAGIC): Likewise.
* src/internal.h (TODO): Likewise.
* src/qemu/qemu_monitor.h (QEMU_MONITOR_MIGRATE): Likewise.
* src/xen/xen_hypervisor.c (XEN_V2_OP_GETAVAILHEAP): Likewise.
* src/xen/xs_internal.h: Likewise.

Network disks are accessed by qemu directly, and have no
associated file on the host, so checking for file ownership etc.
is unnecessary.
Signed-off-by: NJosh Durgin <joshd@hq.newdream.net>

* src/qemu/qemu_driver.c (qemudLogFD, qemudLogReadFD)
(qemudStartup, qemudGetProcessInfo): Use heap instead of stack.

The QEMU driver file is far too large. Move all the hotplug
helper code out into a separate file. No functional change.

* src/qemu/qemu_hotplug.c, src/qemu/qemu_hotplug.h,
  src/Makefile.am: Add hotplug helper file
* src/qemu/qemu_driver.c: Delete hotplug code

To allow the APIs to be used from separate files, move the domain
lock / job helper code into qemu_domain.c

* src/qemu/qemu_domain.c, src/qemu/qemu_domain.h: Add domain lock
  / job code
* src/qemu/qemu_driver.c: Remove domain lock / job code

To allow their use from other source files, move qemuDriverLock
and qemuDriverUnlock to qemu_conf.h and make them non-static

* src/qemu/qemu_conf.c, src/qemu/qemu_conf.h: Add qemuDriverLock
  qemuDriverUnlock
* src/qemu/qemu_driver.c: Remove qemuDriverLock and qemuDriverUnlock

The QEMU driver file is far too large. Move all the hostdev
helper code out into a separate file. No functional change.

* src/qemu/qemu_hostdev.c, src/qemu/qemu_hostdev.h,
  src/Makefile.am: Add hostdev helper file
* src/qemu/qemu_driver.c: Delete hostdev code

The QEMU driver file is far too large. Move all the cgroup
helper code out into a separate file. No functional change.

* src/qemu/qemu_cgroup.c, src/qemu/qemu_cgroup.h,
  src/Makefile.am: Add cgroup helper file
* src/qemu/qemu_driver.c: Delete cgroup code

The QEMU driver file is far too large. Move all the audit
helper code out into a separate file. No functional change.

* src/qemu/qemu_audit.c, src/qemu/qemu_audit.h,
  src/Makefile.am: Add audit helper file
* src/qemu/qemu_driver.c: Delete audit code

Move the code for handling the QEMU virDomainObjPtr private
data, and custom XML namespace into a separate file

* src/qemu/qemu_domain.c, src/qemu/qemu_domain.h: New file
  for private data & namespace code
* src/qemu/qemu_driver.c, src/qemu/qemu_driver.h: Remove
  private data & namespace code
* src/qemu/qemu_driver.h, src/qemu/qemu_command.h: Update
  includes
* src/Makefile.am: Add src/qemu/qemu_domain.c

The qemu_conf.c code is doing three jobs, driver config file
loading, QEMU capabilities management and QEMU command line
management. Move the command line code into its own file

* src/qemu/qemu_command.c, src/qemu/qemu_command.h: New
  command line management code
* src/qemu/qemu_conf.c, src/qemu/qemu_conf.h: Delete command
  line code
* src/qemu/qemu_conf.h, src/qemu_conf.c: Adapt for API renames
* src/Makefile.am: add src/qemu/qemu_command.c
* src/qemu/qemu_monitor_json.c, src/qemu/qemu_monitor_text.c: Add
  import of qemu_command.h

The qemu_conf.c code is doing three jobs, driver config file
loading, QEMU capabilities management and QEMU command line
management. Move the capabilities code into its own file

* src/qemu/qemu_capabilities.c, src/qemu/qemu_capabilities.h: New
  capabilities management code
* src/qemu/qemu_conf.c, src/qemu/qemu_conf.h: Delete capabilities
  code
* src/qemu/qemu_conf.h: Adapt for API renames
* src/Makefile.am: add src/qemu/qemu_capabilities.c

Currently, all of domain "save/dump/managed save/migration"
use the same function "qemudDomainWaitForMigrationComplete"
to wait the job finished, but the error messages are all
about "migration", e.g. when a domain saving job is canceled
by user, "migration was cancled by client" will be throwed as
an error message, which will be confused for user.

As a solution, intoduce two new job types(QEMU_JOB_SAVE,
QEMU_JOB_DUMP), and set "priv->jobActive" to "QEMU_JOB_SAVE"
before saving, to "QEMU_JOB_DUMP" before dumping, so that we
could get the real job type in
"qemudDomainWaitForMigrationComplete", and give more clear
message further.

And as It's not important to figure out what's the exact job
is in the DEBUG and WARN log, also we don't need translated
string in logs, simply repace "migration" with "job" in some
statements.

* src/qemu/qemu_driver.c

* src/util/command.h (virCommandAddArgBuffer)
(virCommandAddEnvBuffer): New prototypes.
* src/util/command.c (virCommandAddArgBuffer)
(virCommandAddEnvBuffer): Implement them.
* src/libvirt_private.syms (command.h): Export them.
* src/qemu/qemu_conf.c (qemudBuildCommandLine): Use them, plugging
a memory leak on rbd_hosts in the process.

Changes common to all network disks:
-Make source name optional in the domain schema, since NBD doesn't use it
-Add a hostName type to the domain schema, and use it instead of genericName, which doesn't include .
-Don't leak host names or ports
-Set the source protocol in qemuParseCommandline
Signed-off-by: NJosh Durgin <joshd@hq.newdream.net>

This patch adds network disk support to libvirt/QEMU.  The currently
supported protocols are nbd, rbd, and sheepdog.  The XML syntax is like
this:

    <disk type="network" device="disk">
      <driver name="qemu" type="raw" />
      <source protocol='rbd|sheepdog|nbd' name="...some image identifier...">
        <host name="mon1.example.org" port="6000">
        <host name="mon2.example.org" port="6000">
        <host name="mon3.example.org" port="6000">
      </source>
      <target dev="vda" bus="virtio" />
    </disk>
Signed-off-by: NMORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp>