The virSocketParse method was not doing any error reporting
which meant the true cause of the problem was lost. Remove
all error reporting from callers, and push it into virSocketParse

* src/util/network.c: Add error reporting to virSocketParse
* src/conf/domain_conf.c, src/conf/network_conf.c,
  src/network/bridge_driver.c: Remove error reporting in
  callers of virSocketParse

The getnameinfo() function is more flexible than inet_ntop()
avoiding the need to if/else the code based on socket family.
Also make it support UNIX socket addrs and allow inclusion
of a port (service) address. Finally do proper error reporting
via normal APIs.

* src/conf/domain_conf.c, src/nwfilter/nwfilter_ebiptables_driver.c,
  src/qemu/qemu_conf.c: Fix error handling with virSocketFormat
* src/util/network.c: Rewrite virSocketFormat to use getnameinfo
  and cope with UNIX socket addrs.

The nwIPAddress was simply a wrapper about virSocketAddr.
Just use the latter directly, removing all the extra field
de-references from code & helper APIs for parsing/formatting.

Also remove all the redundant casts from strong types to
void * and then immediately back to strong types.

* src/conf/nwfilter_conf.h: Remove nwIPAddress
* src/conf/nwfilter_conf.c, src/nwfilter/nwfilter_ebiptables_driver.c:
  Update to use virSocketAddr and remove void * casts.

There was a typo in the IPv6 path of virSocketCheckNetmask which
caused it to never execute.

* src/util/network.c: s/AF_INET/AF_INET6/ in virSocketCheckNetmask

The virSocketParseAddr function was accepting any AF_* constant
and using that to set the ai_flags field in struct addrinfo.
This is invalid, since address families must go in the ai_family
field of the struct.

* src/util/network.c: Fix handling of address family
* src/conf/network_conf.c, src/network/bridge_driver.c: Pass
  AF_UNSPEC instead of relying on it being 0.

Some operations on socket addresses need to know the length of
the sockaddr struct for the particular address family. This
info was being discarded when passing around virSocketAddr
instances. Turn it from a union into a struct containing
union+socklen_t fields, so length is always kept around.

* src/util/network.h: Add socklen_t field to virSocketAddr
* src/util/network.c, src/network/bridge_driver.c,
  src/conf/domain_conf.c: Update to take account of new
  struct definition.

If getnameinfo() with NI_NUMERICHOST set fails, there are no
grounds to expect inet_ntop to succeed, since these calls
are functionally equivalent. Remove useless inet_ntop code
in the getnameinfo() error path.

* daemon/remote.c, src/remote/remote_driver.c: Remove
  calls to inet_ntop

* src/libvirt_private.syms: Sort by header name, then within
header, and drop duplicate virNetworkDefParseNode,
virFileLinkPointsTo and virXPathBoolean.

The QEMU 0.13 release is finally out and from testing in RHEL-6
we know that its JSON and netdev features are now good enough
for us to use by default.

* src/qemu/qemu_conf.c: Enable JSON + netdev for QEMU >= 0.13

* src/util/virtaudit.c (virAuditSend): one less ifdef, since gcc
does not care if an ATTRIBUTE_UNUSED var gets used in some paths.

There is no point in trying to fill params beyond the first error,
because when qemuDomainGetMemoryParameters returns -1 then the caller
cannot detect which values in params are valid.

Also exit early when nparams is 0.

To get them under the common VIR_DOMAIN_MEMORY_* prefix.

Also output the min_guarantee element when set.

The test for <vcpu> element is unrelated to vnc so the easiest fix is to
remove related configuration.

* include/libvirt/libvirt.h.in: Update comment with actual description

This sets the process name to the same value as the Windows title,
but since the name is limited to 16 chars only this is kept as a
configuration option and turned off by default
* src/qemu/qemu.conf src/qemu/qemu_conf.[ch]: hceck for support in the
  QEmu help output, add the option in qemu conf file and augment
  qemudBuildCommandLine to add it if switched on
* src/qemu/libvirtd_qemu.aug src/qemu/test_libvirtd_qemu.aug: augment
  the augeas lenses accordingly
* tests/qemuhelptest.c: cope with the extra flag being detected now

 Avoid the enforcement of direction if
- icmp rules specify the type/code information
- the 'skipMatch' variable is set to 'true'

Adds a new page for the C# language bindings being developed by Arnaud
Champion.

Debian stock kernel has CONFIG_CGROUP_MEM_RES_CTLR disabled due to the
overhead [1]. Allow to start containers if the corresponding files in
the cgroup filesystem are missing. This fixes Debian bug #566180 [2].

[1] http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=534964
[2] http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=566180

The libvirt_util.la library was mistakenly linked into libvirtd
directly. Since libvirt_util.la is already linked to libvirt.so,
this resulted in libvirtd getting two copies of the code and
more critically 2 copies of static global variables.

Testing in turn exposed a issue with loadable modules. The
gnulib replacement functions are not exported to loadable
modules. Rather than trying to figure out the name sof all
gnulib functions & export them, just linkage all loadable
modules against libgnu.la statically.

* daemon/Makefile.am: Remove linkage of libvirt_util.la
  and libvirt_driver.la
* src/Makefile.am: Link driver modules against libgnu.la
* src/libvirt.c: Don't try to load modules which were
  compiled out
* src/libvirt_private.syms: Export all other internal
  symbols that are required  by drivers

A more natural auditing point would perhaps be
SELinuxSetSecurityProcessLabel, but this happens in the child after root
permissions are dropped, so the kernel would refuse the audit record.

Most operations are audited at the libvirtd level; auditing in
src/libvirt.c would result in two audit entries per operation (one in
the client, one in libvirtd).

The only exception is a domain stopping of its own will (e.g. because
the user clicks on "shutdown" inside the interface).  There can often be
no client connected at the time the domain stops, so libvirtd does not
have any virConnectPtr object on which to attach an event watch.  This
patch therefore adds auditing directly inside the qemu driver (other
drivers are not supported).

Integrate with libaudit.so for auditing of important operations.
libvirtd gains a couple of config entries for auditing. By
default it will enable auditing, if its enabled on the host.
It can be configured to force exit if auditing is disabled
on the host. It will can also send audit messages via libvirt
internal logging API

Places requiring audit reporting can use the VIR_AUDIT
macro to report data. This is a no-op unless auditing is
enabled

* autobuild.sh, mingw32-libvirt.spec.in: Disable audit
  on mingw
* configure.ac: Add check for libaudit
* daemon/libvirtd.aug, daemon/libvirtd.conf,
  daemon/test_libvirtd.aug, daemon/libvirtd.c: Add config
  options to enable auditing
* include/libvirt/virterror.h, src/util/virterror.c: Add
  VIR_FROM_AUDIT source
* libvirt.spec.in: Enable audit
* src/util/virtaudit.h, src/util/virtaudit.c: Simple internal
  API for auditing messages

The statstest is xen specific. Instead of filling the code with
a huge number of #ifdef WITH_XEN, just make its entire compilation
conditional in the Makefile.am. Also ensure it links to the Xen
driver so that it builds when driver modules are enabled

* tests/Makefile.am: Make statstest xen conditional. Link to
  xen driver
* tests/Makefile.am: Remove all conditionals

* tools/virsh.pod (memtune): Drop second copy, fill to 80 columns,
enhance wording.

* src/xen/xen_driver.h (xenUnifiedDriver): Remove now-unused
domainGetMaxVcpus, domainSetVcpus.
* src/xen/proxy_internal.c (xenProxyDriver): Likewise.
* src/xen/xen_hypervisor.c (xenHypervisorDriver): Likewise.
* src/xen/xen_inotify.c (xenInotifyDriver): Likewise.
* src/xen/xend_internal.c (xenDaemonDriver)
(xenDaemonDomainSetVcpus): Likewise.
* src/xen/xm_internal.c (xenXMDriver, xenXMDomainSetVcpus):
Likewise.
* src/xen/xs_internal.c (xenStoreDriver): Likewise.

Tested with RHEL 5.6 (xendConfigVersion 2, where xend_internal
controls live domains and xm_internal controls inactive domains).
Hopefully this works with xendConfigVersion 3 (where xend_internal
controls everything).

* src/xen/xen_driver.c (xenUnifiedDomainSetVcpusFlags): Support
more flags.
(xenUnifiedGetMaxVcpus): Export.
* src/xen/xm_internal.h (xenXMDomainSetVcpusFlags): New prototype.
* src/xen/xend_internal.h (xenDaemonDomainSetVcpusFlags): Likewise.
* src/xen/xen_driver.h (xenUnifiedGetMaxVcpus): Likewise.
* src/xen/xm_internal.c (xenXMDomainSetVcpusFlags): New function.
* src/xen/xend_internal.c (xenDaemonDomainSetVcpusFlags): Likewise.

* src/xen/xen_driver.c (xenUnifiedDomainGetVcpusFlags): Support
more flags.
* src/xen/xend_internal.h (xenDaemonDomainGetVcpusFlags): New
prototype.
* src/xen/xm_internal.h (xenXMDomainGetVcpusFlags): Likewise.
* src/xen/xend_internal.c (virDomainGetVcpusFlags): New function.
* src/xen/xm_internal.c (xenXMDomainGetVcpusFlags): Likewise.

This patch series focuses on xendConfigVersion 2 (xm_internal) and 3
(xend_internal), but leaves out changes for xenapi drivers.

See this link for more details about vcpu_avail for xm usage.
http://lists.xensource.com/archives/html/xen-devel/2009-11/msg01061.html

This relies on the fact that def->maxvcpus can be at most 32 with xen.

* src/xen/xend_internal.c (xenDaemonParseSxpr)
(sexpr_to_xend_domain_info, xenDaemonFormatSxpr): Use vcpu_avail
when current vcpus is less than maximum.
* src/xen/xm_internal.c (xenXMDomainConfigParse)
(xenXMDomainConfigFormat): Likewise.
* tests/xml2sexprdata/xml2sexpr-pv-vcpus.sexpr: New file.
* tests/sexpr2xmldata/sexpr2xml-pv-vcpus.sexpr: Likewise.
* tests/sexpr2xmldata/sexpr2xml-pv-vcpus.xml: Likewise.
* tests/xmconfigdata/test-paravirt-vcpu.cfg: Likewise.
* tests/xmconfigdata/test-paravirt-vcpu.xml: Likewise.
* tests/xml2sexprtest.c (mymain): New test.
* tests/sexpr2xmltest.c (mymain): Likewise.
* tests/xmconfigtest.c (mymain): Likewise.

* src/qemu/qemu_driver.c (qemudDomainSetVcpusFlags)
(qemudDomainGetVcpusFlags): Support all feasible flag
combinations.

* src/qemu/qemu_conf.c (qemuParseCommandLineSmp): Distinguish
between vcpus and maxvcpus, for new enough qemu.
* tests/qemuargv2xmltest.c (mymain): Add new test.
* tests/qemuxml2argvtest.c (mymain): Likewise.
* tests/qemuxml2xmltest.c (mymain): Likewise.
* tests/qemuxml2argvdata/qemuxml2argv-smp.args: New file.

* src/test/test_driver.c (testDomainGetVcpusFlags)
(testDomainSetVcpusFlags): Support all flags.
(testDomainUpdateVCPUs): Update cpu count here.

* tools/virsh.c (cmdSetvcpus): Add new flags.  Let invalid
commands through to driver, to ease testing of hypervisor argument
validation.
(cmdMaxvcpus, cmdVcpucount): New commands.
(commands): Add new commands.
* tools/virsh.pod (setvcpus, vcpucount, maxvcpus): Document new
behavior.

Although this patch adds a distinction between maximum vcpus and
current vcpus in the XML, the values should be identical for all
drivers at this point.  Only in subsequent per-driver patches will
a distinction be made.

In general, virDomainGetInfo should prefer the current vcpus.

* src/conf/domain_conf.h (_virDomainDef): Adjust vcpus to unsigned
short, to match virDomainGetInfo limit.  Add maxvcpus member.
* src/conf/domain_conf.c (virDomainDefParseXML)
(virDomainDefFormat): parse and print out vcpu details.
* src/xen/xend_internal.c (xenDaemonParseSxpr)
(xenDaemonFormatSxpr): Manage both vcpu numbers, and require them
to be equal for now.
* src/xen/xm_internal.c (xenXMDomainConfigParse)
(xenXMDomainConfigFormat): Likewise.
* src/phyp/phyp_driver.c (phypDomainDumpXML): Likewise.
* src/openvz/openvz_conf.c (openvzLoadDomains): Likewise.
* src/openvz/openvz_driver.c (openvzDomainDefineXML)
(openvzDomainCreateXML, openvzDomainSetVcpusInternal): Likewise.
* src/vbox/vbox_tmpl.c (vboxDomainDumpXML, vboxDomainDefineXML):
Likewise.
* src/xenapi/xenapi_driver.c (xenapiDomainDumpXML): Likewise.
* src/xenapi/xenapi_utils.c (createVMRecordFromXml): Likewise.
* src/esx/esx_vmx.c (esxVMX_ParseConfig, esxVMX_FormatConfig):
Likewise.
* src/qemu/qemu_conf.c (qemuBuildSmpArgStr)
(qemuParseCommandLineSmp, qemuParseCommandLine): Likewise.
* src/qemu/qemu_driver.c (qemudDomainHotplugVcpus): Likewise.
* src/opennebula/one_conf.c (xmlOneTemplate): Likewise.

Note - this wrapping is completely mechanical; the old API will
function identically, since the new API validates that the exact
same flags are provided by the old API.  On a per-driver basis,
it may make sense to have the old API pass a different set of flags,
but that should be done in the per-driver patch that implements
the full range of flag support in the new API.

* src/esx/esx_driver.c (esxDomainSetVcpus, escDomainGetMaxVpcus):
Move guts...
(esxDomainSetVcpusFlags, esxDomainGetVcpusFlags): ...to new
functions.
(esxDriver): Trivially support the new API.
* src/openvz/openvz_driver.c (openvzDomainSetVcpus)
(openvzDomainSetVcpusFlags, openvzDomainGetMaxVcpus)
(openvzDomainGetVcpusFlags, openvzDriver): Likewise.
* src/phyp/phyp_driver.c (phypDomainSetCPU)
(phypDomainSetVcpusFlags, phypGetLparCPUMAX)
(phypDomainGetVcpusFlags, phypDriver): Likewise.
* src/qemu/qemu_driver.c (qemudDomainSetVcpus)
(qemudDomainSetVcpusFlags, qemudDomainGetMaxVcpus)
(qemudDomainGetVcpusFlags, qemuDriver): Likewise.
* src/test/test_driver.c (testSetVcpus, testDomainSetVcpusFlags)
(testDomainGetMaxVcpus, testDomainGetVcpusFlags, testDriver):
Likewise.
* src/vbox/vbox_tmpl.c (vboxDomainSetVcpus)
(vboxDomainSetVcpusFlags, virDomainGetMaxVcpus)
(virDomainGetVcpusFlags, virDriver): Likewise.
* src/xen/xen_driver.c (xenUnifiedDomainSetVcpus)
(xenUnifiedDomainSetVcpusFlags, xenUnifiedDomainGetMaxVcpus)
(xenUnifiedDomainGetVcpusFlags, xenUnifiedDriver): Likewise.
* src/xenapi/xenapi_driver.c (xenapiDomainSetVcpus)
(xenapiDomainSetVcpusFlags, xenapiDomainGetMaxVcpus)
(xenapiDomainGetVcpusFlags, xenapiDriver): Likewise.
(xenapiError): New helper macro.

Done by editing the first three files, then running
'make -C src rpcgen', then editing src/remote_protocol-structs
to match.

* daemon/remote.c (remoteDispatchDomainSetVcpusFlags)
(remoteDispatchDomainGetVcpusFlags): New functions.
* src/remote/remote_driver.c (remoteDomainSetVcpusFlags)
(remoteDomainGetVcpusFlags, remote_driver): Client side
serialization.
* src/remote/remote_protocol.x
(remote_domain_set_vcpus_flags_args)
(remote_domain_get_vcpus_flags_args)
(remote_domain_get_vcpus_flags_ret)
(REMOTE_PROC_DOMAIN_SET_VCPUS_FLAGS)
(REMOTE_PROC_DOMAIN_GET_VCPUS_FLAGS): Define wire format.
* daemon/remote_dispatch_args.h: Regenerate.
* daemon/remote_dispatch_prototypes.h: Likewise.
* daemon/remote_dispatch_table.h: Likewise.
* src/remote/remote_protocol.c: Likewise.
* src/remote/remote_protocol.h: Likewise.
* src/remote_protocol-structs: Likewise.