- 28 4月, 2017 4 次提交
-
-
由 Peter Krempa 提交于
Move it to the place where actually interleaving elements can be placed.
-
由 Peter Krempa 提交于
'diskSourceNetwork' schema define was rather big and it would be hard to simplify it. Split out the host portion subelement into a separate define.
-
由 Peter Krempa 提交于
They don't contain any elements to interleave.
-
由 Jiri Denemark 提交于
This patch introduces <cache level='N' mode='emulate'/> <cache mode='passthrough'/> <cache mode='disable'/> sub element of /domain/cpu. Currently only a single <cache> element is allowed. Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
-
- 21 4月, 2017 1 次提交
-
-
由 Martin Kletzander 提交于
We are currently parsing only rx/frames/max because that's the only value that makes sense for us. The tun device just added support for this one and the others are only supported by hardware devices which we don't need to worry about as the only way we'd pass those to the domain is using <hostdev/> or <interface type='hostdev'/>. And in those cases the guest can modify the settings itself. Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>
-
- 05 4月, 2017 1 次提交
-
-
由 Peter Krempa 提交于
docs/schemas directory is meant for schemas which are installed on the system. The schema for the news file does not need to be installed. Store it along with the file it describes for simplicity.
-
- 04 4月, 2017 1 次提交
-
- 03 4月, 2017 2 次提交
-
-
由 Andrea Bolognani 提交于
Creating dummy <change> elements was a workaround for the HTML DTD not allowing empty <ul> elements, but we can do better by tweaking the the XSLT stylesheet.
-
由 Peter Krempa 提交于
Since this file gets changed (and broken) rather often, introduce a schema file so that the test suite can validate it.
-
- 29 3月, 2017 1 次提交
-
-
由 Ján Tomko 提交于
Pool types that have the VIR_STORAGE_POOL_SOURCE_NAME flag set allow omitting the <name> element and instead fill out the pool name from the <source><name> element. Relax the schema to make <name> optional for these pools. Expressing that at least one of these is required is out of scope of the schema.
-
- 27 3月, 2017 2 次提交
-
-
由 Laine Stump 提交于
This brings the libvirt version of this RNG file in line with the same file in netcf (as soon as the corresponding patch there is ACKed and pushed). There's no reason to require it when defining an interface (the config option it corresponds to is optional), and it isn't even output in the status of an interface. Resolves: https://bugzilla.redhat.com/1414404
-
由 Erik Skultety 提交于
A mediated device will be identified by a UUID (with 'model' now being a mandatory <hostdev> attribute to represent the mediated device API) of the user pre-created mediated device. We also need to make sure that if user explicitly provides a guest address for a mdev device, the address type will be matching the device API supported on that specific mediated device and error out with an incorrect XML message. The resulting device XML: <devices> <hostdev mode='subsystem' type='mdev' model='vfio-pci'> <source> <address uuid='c2177883-f1bb-47f0-914d-32a22e3a8804'> </source> </hostdev> </devices> Signed-off-by: NErik Skultety <eskultet@redhat.com>
-
- 26 3月, 2017 1 次提交
-
-
由 Roman Bogorodskiy 提交于
Commit df769041 made the 'machine' element in domaincaps optional. Update the schema to reflect that.
-
- 17 3月, 2017 2 次提交
-
-
由 Jiri Denemark 提交于
The attribute can be used to request a specific way of checking whether the virtual CPU matches created by the hypervisor matches the specification in domain XML. Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
-
由 Andrea Bolognani 提交于
QEMU 2.9 introduces the pcie-root-port device, which is a generic version of the existing ioh3420 device. Make the new device available to libvirt users.
-
- 15 3月, 2017 3 次提交
-
-
由 Michal Privoznik 提交于
For NVDIMM devices it is optionally possible to specify the size of internal storage for namespaces. Namespaces are a feature that allows users to partition the NVDIMM for different uses. Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
由 Michal Privoznik 提交于
Now that NVDIMM has found its way into libvirt, users might want to fine tune some settings for each module separately. One such setting is 'share=on|off' for the memory-backend-file object. This setting - just like its name suggest already - enables sharing the nvdimm module with other applications. Under the hood it controls whether qemu mmaps() the file as MAP_PRIVATE or MAP_SHARED. Yet again, we have such config knob in domain XML, but it's just an attribute to numa <cell/>. This does not give fine enough tuning on per-memdevice basis so we need to have the attribute for each device too. Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
由 Michal Privoznik 提交于
NVDIMM is new type of memory introduced into QEMU 2.6. The idea is that we have a Non-Volatile memory module that keeps the data persistent across domain reboots. At the domain XML level, we already have some representation of 'dimm' modules. Long story short, NVDIMM will utilize the existing <memory/> element that lives under <devices/> by adding a new attribute 'nvdimm' to the existing @model and introduce a new <path/> element for <source/> while reusing other fields. The resulting XML would appear as: <memory model='nvdimm'> <source> <path>/tmp/nvdimm</path> </source> <target> <size unit='KiB'>523264</size> <node>0</node> </target> <address type='dimm' slot='0'/> </memory> So far, this is just a XML parser/formatter extension. QEMU driver implementation is in the next commit. For more info on NVDIMM visit the following web page: http://pmem.io/Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
- 12 3月, 2017 1 次提交
-
-
由 Fabian Freyer 提交于
bhyve supports 'gop' video device that allows clients to connect to VMs using VNC clients. This commit adds support for that to the bhyve driver: - Introducr 'gop' video device type - Add capabilities probing for the 'fbuf' device that's responsible for graphics - Update command builder routines to let users configure domain's VNC via gop graphics. Signed-off-by: NRoman Bogorodskiy <bogorodskiy@gmail.com>
-
- 08 3月, 2017 9 次提交
-
-
由 Nitesh Konkar 提交于
This patch adds support and documentation for the emulation_faults perf event. Signed-off-by: NNitesh Konkar <nitkon12@linux.vnet.ibm.com>
-
由 Nitesh Konkar 提交于
This patch adds support and documentation for the alignment_faults perf event. Signed-off-by: NNitesh Konkar <nitkon12@linux.vnet.ibm.com>
-
由 Nitesh Konkar 提交于
This patch adds support and documentation for the page_faults_maj perf event. Signed-off-by: NNitesh Konkar <nitkon12@linux.vnet.ibm.com>
-
由 Nitesh Konkar 提交于
This patch adds support and documentation for the page_faults_min perf event. Signed-off-by: NNitesh Konkar <nitkon12@linux.vnet.ibm.com>
-
由 Nitesh Konkar 提交于
This patch adds support and documentation for the cpu_migrations perf event. Signed-off-by: NNitesh Konkar <nitkon12@linux.vnet.ibm.com>
-
由 Nitesh Konkar 提交于
This patch adds support and documentation for the context_switches perf event. Signed-off-by: NNitesh Konkar <nitkon12@linux.vnet.ibm.com>
-
由 Nitesh Konkar 提交于
This patch adds support and documentation for the page_faults perf event. Signed-off-by: NNitesh Konkar <nitkon12@linux.vnet.ibm.com>
-
由 Nitesh Konkar 提交于
This patch adds support and documentation for the task_clock perf event. Signed-off-by: NNitesh Konkar <nitkon12@linux.vnet.ibm.com>
-
由 Nitesh Konkar 提交于
This patch adds support and documentation for the cpu_clock perf event. Signed-off-by: NNitesh Konkar <nitkon12@linux.vnet.ibm.com>
-
- 21 2月, 2017 1 次提交
-
-
由 Martin Kletzander 提交于
With that users could access files outside /dev/shm. That itself isn't a security problem, but might cause some errors we want to avoid. So let's forbid slashes as we do with domain and volume names and also mention that in the schema. Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1395496Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>
-
- 17 2月, 2017 3 次提交
-
-
由 Marc-André Lureau 提交于
Add a new attribute 'rendernode' to <gl> spice element. Give it to QEMU if qemu supports it (queued for 2.9). Signed-off-by: NMarc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
由 Marc-André Lureau 提交于
Add a new 'drm' capability for Direct Rendering Manager (DRM) devices, providing device type information. Teach the udev backend to populate those devices. Signed-off-by: NMarc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
由 Marc-André Lureau 提交于
Add new <devnode> top-level <device> element, that list the associated /dev files. Distinguish the main /dev name from symlinks with a 'type' attribute of value 'dev' or 'symlink'. Update a test to check XML schema, and actually add it to the test list since it was missing. Signed-off-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
-
- 09 2月, 2017 1 次提交
-
-
由 Jaroslav Safka 提交于
This part introduces new xml elements for file based memorybacking support and their parsing. (It allows vhost-user to be used without hugepages.) New xml elements: <memoryBacking> <source type="file|anonymous"/> <access mode="shared|private"/> <allocation mode="immediate|ondemand"/> </memoryBacking>
-
- 08 2月, 2017 1 次提交
-
-
由 Laine Stump 提交于
Example: <network> ... <mtu size='9000'/> ... If mtu is unset, it's assumed that we want the default for whatever is the underlying transport (usually this is 1500). This setting isn't yet wired in, so it will have no effect. This partially resolves: https://bugzilla.redhat.com/1224348
-
- 26 1月, 2017 2 次提交
-
-
由 Olga Krishtal 提交于
Signed-off-by: NOlga Krishtal <okrishtal@virtuozzo.com>
-
由 Michal Privoznik 提交于
So far we allow to set MTU for libvirt networks. However, not all domain interfaces have to be plugged into a libvirt network and even if they are, they might want to have a different MTU (e.g. for testing purposes). Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
- 18 1月, 2017 1 次提交
-
-
由 Boris Fiuczynski 提交于
fabric_name is one of many fc_host attributes in Linux that is optional and left to the low-level driver to decide if it is implemented. The zfcp device driver does not provide a fabric name for an fcp host. This patch removes the requirement for a fabric name by making it optional. Signed-off-by: NBoris Fiuczynski <fiuczy@linux.vnet.ibm.com>
-
- 17 1月, 2017 1 次提交
-
-
由 Daniel P. Berrange 提交于
This reverts commit ae16c95f.
-
- 10 1月, 2017 1 次提交
-
-
由 Nitesh Konkar 提交于
This patch adds support and documentation for a generalized hardware cache event called cache_l1d perf event. Signed-off-by: NNitesh Konkar <nitkon12@linux.vnet.ibm.com>
-
- 07 1月, 2017 1 次提交
-
-
由 John Ferlan 提交于
Add new fields to the fchost structure to allow creation of a vHBA via the storage pool when a parent_wwnn/parent_wwpn or parent_fabric_wwn is supplied in the storage pool XML.
-