Signed-off-by: NPavel Hrdina <phrdina@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

https://bugzilla.redhat.com/show_bug.cgi?id=1431112

Imagine a FS mounted on /dev/blah/blah2. Our process of creating
suffix for temporary location where all the mounted filesystems
are moved is very simplistic. We want:

/var/run/libvirt/qemu/$domName.$suffix\

were $suffix is just the mount point path stripped of the "/dev/"
prefix. For instance:

/var/run/libvirt/qemu/fedora.mqueue  for /dev/mqueue
/var/run/libvirt/qemu/fedora.pts     for /dev/pts

and so on. Now if we plug /dev/blah/blah2 into the example we see
some misbehaviour:

/var/run/libvirt/qemu/fedora.blah/blah2

Well, misbehaviour if /dev/blah/blah2 is a file, because in that
case we call virFileTouch() instead of virFileMakePath().
The solution is to replace all the slashes in the suffix with say
dots. That way we don't have to care about nested directories.
IOW, the result we want for given example is:

/var/run/libvirt/qemu/fedora.blah.blah2
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

https://bugzilla.redhat.com/show_bug.cgi?id=1431112

There can be nested mount points. For instance /dev/shm/blah can
be a mount point and /dev/shm too. It doesn't make much sense to
return the former path because callers preserve the latter (and
with that the former too). Therefore prune nested mount points.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

https://bugzilla.redhat.com/show_bug.cgi?id=1431112

After 290a00e4 we know how to deal with file mount points.
However, when cleaning up the temporary location for preserved
mount points we are still calling rmdir(). This won't fly for
files. We need to call unlink(). Now, since we don't really care
if the cleanup succeeded or not (it's the best effort anyway), we
can call both rmdir() and unlink() without need for
differentiation between files and directories.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

On some platforms the number of bits in the cbm_mask might not be
divisible by 4 (and not even by 2), so we need to properly count the
bits.  Similar file, min_cbm_bits, is properly parsed and used, but if
the number is greater than one, we lose the information about
granularity when reporting the data in capabilities.  For that matter
always report granularity, but if it is not the same as the minimum,
add that information in there as well.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Allow access to aarch64 UEFI images.
Signed-off-by: NChristian Ehrhardt <christian.ehrhardt@canonical.com>
Signed-off-by: NStefan Bader <stefan.bader@canonical.com>
Acked-by: NGuido Günther <agx@sigxcpu.org>

The split firmware and variables files introduced by
https://bugs.debian.org/764918 are in a different directory for
some reason. Let the virtual machine read both.
Signed-off-by: NChristian Ehrhardt <christian.ehrhardt@canonical.com>
Signed-off-by: NStefan Bader <stefan.bader@canonical.com>

Change the settings from qemuDomainUpdateDeviceLive() as otherwise the
call would succeed even though nothing has changed.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1414627Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Most places which want to check ABI stability for an active domain need
to call this API rather than the original
qemuDomainDefCheckABIStability. The only exception is in snapshots where
we need to decide what to do depending on the saved image data.

https://bugzilla.redhat.com/show_bug.cgi?id=1460952Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
Reviewed-by: NPavel Hrdina <phrdina@redhat.com>

When making ABI stability checks for an active domain, we need to make
sure we use the same migratable definition which virDomainGetXMLDesc
with the MIGRATABLE flag provides, otherwise the ABI check will fail.
This is implemented in the new qemuDomainCheckABIStability which takes a
domain object and generates the right migratable definition from it.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
Reviewed-by: NPavel Hrdina <phrdina@redhat.com>

This patch separates the actual ABI checks from getting migratable defs
in qemuDomainDefCheckABIStability so that we can create another wrapper
which will use different methods to get the migratable defs.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
Reviewed-by: NPavel Hrdina <phrdina@redhat.com>

The main goal of this function is to enable reusing the parsing code
from qemuDomainDefCopy.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
Reviewed-by: NPavel Hrdina <phrdina@redhat.com>

https://bugzilla.redhat.com/show_bug.cgi?id=1214369

My fix 671d1859 was incomplete. If domain doesn't have
hugepages enabled, because of missing condition we would still be
putting hugepages path onto qemu cmd line. Clean up the
conditions so that it's more visible next time.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

With glibc >= 2.25.90 writev() is only available if you explicitly
include sys/uio.h. This matches the documented requirements, but
older glibc and other *NIX pulled in writev indirectly so the bug
wasn't noticed previously.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

With the current logic, we only free @tlsalias as part of the error
label and would have to free it explicitly earlier in the code. Convert
the error label to cleanup, so that we have only one sink, where we
handle all frees. Since JSON object append operation consumes pointers,
make sure @backend is cleared before we hit the cleanup label.
Signed-off-by: NErik Skultety <eskultet@redhat.com>
Reviewed-by: NPavel Hrdina <phrdina@redhat.com>

https://bugzilla.redhat.com/show_bug.cgi?id=1214369

Consider the following XML:

  <memoryBacking>
    <hugepages>
      <page size='2048' unit='KiB' nodeset='1'/>
    </hugepages>
    <source type='file'/>
    <access mode='shared'/>
  </memoryBacking>

  <numa>
    <cell id='0' cpus='0-3' memory='512000' unit='KiB'/>
    <cell id='1' cpus='4-7' memory='512000' unit='KiB'/>
  </numa>

The following cmd line is generated:

  -object
  memory-backend-file,id=ram-node0,mem-path=/var/lib/libvirt/qemu/ram,
  share=yes,size=524288000 -numa node,nodeid=0,cpus=0-3,memdev=ram-node0
  -object
  memory-backend-file,id=ram-node1,mem-path=/var/lib/libvirt/qemu/ram,
  share=yes,size=524288000 -numa node,nodeid=1,cpus=4-7,memdev=ram-node1

This is obviously wrong as for node 1 hugepages should have been
used. The hugepages configuration is more specific than <source
type='file'/>.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

https://bugzilla.redhat.com/show_bug.cgi?id=1214369
https://bugzilla.redhat.com/show_bug.cgi?id=1458638

Historically, we've always supported memAccess for domains backed
by hugepages. However, somewhere along the way we've regressed
and stopped allowing such configuration. Fix it.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

https://bugzilla.redhat.com/show_bug.cgi?id=1455819

It may happen that a domain is started without any huge pages.
However, user might try to attach a DIMM module later. DIMM
backed by huge pages (why would somebody want to mix regular and
huge pages is beyond me). Therefore we have to create the dir if
we haven't done so far.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

https://bugzilla.redhat.com/show_bug.cgi?id=1455819

Currently, the per-domain path for huge pages mmap() for qemu is
created iff domain has memoryBacking and hugepages in it
configured. However, this alone is not enough because there can
be a DIMM module with hugepages configured too.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Commit v3.4.0-44-gac793bd7 fixed a memory leak, but failed to return
the special -3 value. Thus an attempt to start a domain with corrupted
managed save file would removed the corrupted file and report
"An error occurred, but the cause is unknown" instead of starting the
domain from scratch.

https://bugzilla.redhat.com/show_bug.cgi?id=1460962

Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

Insert missing "IO" into function name.
Signed-off-by: NErik Skultety <eskultet@redhat.com>

Signed-off-by: NAndrea Bolognani <abologna@redhat.com>

Use ATTRIBUTE_FALLTHROUGH, introduced by commit
5d84f596, instead of comments to
indicate that the fall through is an intentional behavior.
Signed-off-by: NMarc Hartmayer <mhartmay@linux.vnet.ibm.com>
Reviewed-by: NBoris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Reviewed-by: NBjoern Walk <bwalk@linux.vnet.ibm.com>

Add a comment for mon->watch to make clear what's the purpose of this
value.
Signed-off-by: NMarc Hartmayer <mhartmay@linux.vnet.ibm.com>
Reviewed-by: NBjoern Walk <bwalk@linux.vnet.ibm.com>

Signed-off-by: NMarc Hartmayer <mhartmay@linux.vnet.ibm.com>
Reviewed-by: NBoris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Reviewed-by: NBjoern Walk <bwalk@linux.vnet.ibm.com>

The virDomainUSBAddressEnsure returns 0 or -1, so commit id 'de325472'
checking for 1 like qemuDomainAttachChrDeviceAssignAddr was wrong.
Signed-off-by: NShivaprasad G Bhat <sbhat@linux.vnet.ibm.com>

This reverts commit 22b02f44.
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>

Commit 824272cb attempted to fix escaping of characters in unix
socket path but it was wrong.  We need to escape only ',', there is
no escape character for '='.
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>

Exiting early through the cleanup path did result in 'mirror'
being leaked.

Be nicer to the user and report a proper error instead of:
An error occurred, but the cause is unknown

https://bugzilla.redhat.com/show_bug.cgi?id=1460086

https://bugzilla.redhat.com/show_bug.cgi?id=1447618

Currently, any attempt to change MTU on an interface that is
plugged to a running domain is silently ignored. We should either
do what's asked or error out. Well, we can update the host side
of the interface, but we cannot change 'host_mtu' attribute for
the virtio-net device. Therefore we have to error out.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NLaine Stump <laine@laine.org>

https://bugzilla.redhat.com/show_bug.cgi?id=1408701

While implementing MTU (572eda12 and friends), I've forgotten
to actually set MTU on the host NIC in case of hotplug. We
correctly tell qemu on the monitor what the MTU should be, but we
are not actually setting it on the host NIC.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NLaine Stump <laine@laine.org>

Format iommu_platform= and ats= for virtio devices.

https://bugzilla.redhat.com/show_bug.cgi?id=1283251Reviewed-by: NPavel Hrdina <phrdina@redhat.com>

https://bugzilla.redhat.com/show_bug.cgi?id=1283251Reviewed-by: NPavel Hrdina <phrdina@redhat.com>

https://bugzilla.redhat.com/show_bug.cgi?id=1283251Reviewed-by: NPavel Hrdina <phrdina@redhat.com>

https://bugzilla.redhat.com/show_bug.cgi?id=1283251Reviewed-by: NPavel Hrdina <phrdina@redhat.com>

https://bugzilla.redhat.com/show_bug.cgi?id=1283251Reviewed-by: NPavel Hrdina <phrdina@redhat.com>

https://bugzilla.redhat.com/show_bug.cgi?id=1283251Reviewed-by: NPavel Hrdina <phrdina@redhat.com>

https://bugzilla.redhat.com/show_bug.cgi?id=1283251Reviewed-by: NPavel Hrdina <phrdina@redhat.com>