- 12 2月, 2011 4 次提交
-
-
由 Matthias Bolte 提交于
Also use VIR_ERR_OPERATION_INVALID instead of VIR_ERR_NO_SUPPORT, as the operation could succeed when the cgroup controller was mounted.
-
由 Osier Yang 提交于
When attaching a device that already exists, xend driver updates the device with "device_configure", it causes problems (e.g. for disk device, 'device_configure' only can be used to update device like CDROM), on the other hand, we provide additional API (virDomainUpdateDevice) to update device, this fix is to raise up errors instead of updating the existed device which is not CDROM device. Changes from v1 to v2: - allow to update CDROM * src/xen/xend_internal.c
-
由 Eric Blake 提交于
Building the 0.8.8 release candidate on cygwin produced this compiler warning, which is indicative of catastrophic failure on any attempt to print an error message with errno turned to a string: CC strerror_r.lo strerror_r.c: In function 'rpl_strerror_r': strerror_r.c:67: warning: assignment makes integer from pointer without a cast This has been fixed in gnulib. * .gnulib: Update to latest, for strerror_r fix. * src/util/memory.c (includes): Satisfy 'make syntax-check'.
-
由 Philipp Hahn 提交于
Suspending a VM which contains shell meta characters doesn't work with libvirt-0.8.7: /var/log/libvirt/qemu/andreas_231-ne\ doch\ nicht.log: sh: -c: line 0: syntax error near unexpected token `doch' sh: -c: line 0: `cat | { dd bs=4096 seek=1 if=/dev/null && dd bs=1048576; } Although target="andreas_231-ne doch nicht" contains shell meta characters (here: blanks), they are not properly escaped by src/qemu/qemu_monitor_{json,text}.c#qemuMonitor{JSON,Text}MigrateToFile() First, the filename needs to be properly escaped for the shell, than this command line has to be properly escaped for qemu again. For this to work, remove the old qemuMonitorEscapeArg() wrapper, rename qemuMonitorEscape() to it removing the handling for shell=TRUE, and implement a new qemuMonitorEscapeShell() returning strings using single quotes. Using double quotes or escaping special shell characters with backslashes would also be possible, but the set of special characters heavily depends on the concrete shell (dsh, bash, zsh) and its setting (history expansion, interactive use, ...) Signed-off-by: NPhilipp Hahn <hahn@univention.de>
-
- 11 2月, 2011 2 次提交
-
-
由 Daniel P. Berrange 提交于
The logging functions are enhanced so that immediately prior to the first log message being printed to any output channel, the libvirt package version will be printed. eg $ LIBVIRT_DEBUG=1 virsh 18:13:28.013: 17536: info : libvirt version: 0.8.7 18:13:28.013: 17536: debug : virInitialize:361 : register drivers ... The 'configure' script gains two new arguments which can be used as --with-packager="Fedora Project, x86-01.phx2.fedoraproject.org, 01-27-2011-18:00:10" --with-packager-version="1.fc14" to allow distros to append a custom string with package specific data. The RPM specfile is modified so that it appends the RPM version, the build host, the build date and the packager name. eg $ LIBVIRT_DEBUG=1 virsh 18:14:52.086: 17551: info : libvirt version: 0.8.7, package: 1.fc13 (Fedora Project, x86-01.phx2.fedoraproject.org, 01-27-2011-18:00:10) 18:14:52.086: 17551: debug : virInitialize:361 : register drivers Thus when distro packagers receive bug reports they can clearly see what version was in use, even if the bug reporter mistakenly or intentionally lies about version/builds * src/util/logging.c: Output version data prior to first log message * libvirt.spec.in: Include RPM release, date, hostname & packager * configure.ac: Add --with-packager & --with-packager-version args
-
由 Wen Congyang 提交于
QEMUD_CMD_FLAG_PCI_MULTIBUS should be set in the function qemuCapsExtractVersionInfo() The flag QEMUD_CMD_FLAG_PCI_MULTIBUS is used in the function qemuBuildDeviceAddressStr(). All callers get qemuCmdFlags by the function qemuCapsExtractVersionInfo() except that testCompareXMLToArgvFiles() in qemuxml2argvtest.c. So we should set QEMUD_CMD_FLAG_PCI_MULTIBUS in the function qemuCapsExtractVersionInfo() instead of qemuBuildCommandLine() because the function qemuBuildCommandLine() does not be called when we attach a pci device. tests: set QEMUD_CMD_FLAG_PCI_MULTIBUS in testCompareXMLToArgvFiles() set QEMUD_CMD_FLAG_PCI_MULTIBUS before calling qemuBuildCommandLine() as the flags is not set by qemuCapsExtractVersionInfo(). Signed-off-by: NWen Congyang <wency@cn.fujitsu.com>
-
- 10 2月, 2011 15 次提交
-
-
由 Daniel P. Berrange 提交于
Win32 doesn't have a concept of signal masks so disable that code. It is unclear how SIGINT is delivered (if at all) on Win32, so this might further work to provide an alternative to pthread_sigmask * tools/virsh.c: Avoid pthread_sigmask on Win32
-
由 Daniel P. Berrange 提交于
Quite a few hosts don't have cgroups mounted and so see warnings from libvirt logged, which then cause bug reports, etc. Reduce the log level to INFO so they're not visible by default * src/qemu/qemu_driver.c: Reduce log level for cgroups
-
由 Daniel P. Berrange 提交于
When run non-root the nwfilter driver logs error messages about being unable to find iptables/ebtables commands (they are in /sbin which isn't in $PATH). The nwfilter driver can't ever work as non-root, so simply skip it entirely thus avoiding the error messages * src/conf/nwfilter_conf.h, src/nwfilter/nwfilter_driver.c, src/nwfilter/nwfilter_gentech_driver.c, src/nwfilter/nwfilter_gentech_driver.h: Pass 'bool privileged' flag down to final driver impl * src/nwfilter/nwfilter_ebiptables_driver.c: Skip initialization if not privileged
-
由 Michal Privoznik 提交于
A typo s/spice/vnc/ caused parsing of the spice 'auth' data to write into the wrong part of the struct, blowing away other unrelated data. * src/conf/domain_conf.c: s/vnc/spice/ in parsing spice auth
-
由 Eric Blake 提交于
* Makefile.am (EXTRA_DIST): Distribute cfg.mk.
-
由 Michal Novotny 提交于
Signed-off-by: NMichal Novotny <minovotn@redhat.com>
-
由 Eric Blake 提交于
* .dir-locals.el (html-mode): Let emacs help out. * cfg.mk (sc_TAB_in_indentation): Check more files. * docs/internals/command.html.in: Fix offenders. * docs/formatdomain.html.in: Likewise. * docs/internals.html.in: Likewise. Reported by Jiri Denemark.
-
由 Daniel P. Berrange 提交于
Most of te VIR_INFO calls in the udev driver are only relevant to developers so can switch to VIR_DEBUG. Failure to initialize libpciaccess though is a fatal error * src/node_device/node_device_udev.c: Adjust log levels
-
由 Daniel P. Berrange 提交于
When probing machine types if the QEMU binary does not exist we get a hard to diagnose error, due to the execve() in the child failing error: internal error Child process exited with status 1. Add an explicit check so that we get error: Cannot find QEMU binary /usr/libexec/qem3u-kvm: No such file or directory * src/qemu/qemu_capabilities.c: Check for QEMU binary
-
由 Daniel P. Berrange 提交于
To make it easier to investigate problems with async event delivery, add two more debugging lines * daemon/remote.c: Debug when an event is queued for dispatch * src/remote/remote_driver.c: Debug when an event is received for processing
-
由 Daniel P. Berrange 提交于
When built as modules, the connection drivers live in $LIBDIR/libvirt/drivers. Now we add lock manager drivers, we need to distinguish. So move the existing modules to 'connection-driver' * src/Makefile.am: Move module install dir * src/driver.c: Move module search dir
-
由 Daniel P. Berrange 提交于
To ensure child processes will log all error messages, reset the logging filter function when forking * src/util/util.c: Reset log filter in fork
-
由 Daniel P. Berrange 提交于
Some functionality run in virExec hooks may do I/O which can trigger SIGPIPE. Renable SIGPIPE blocking around the hook function * src/util/util.c: Block SIGPIPE around hooks
-
由 Daniel P. Berrange 提交于
The Linux kernel headers don't have a value for SCSI type 12, but HAL source code shows this to be a 'raid'. Add workaround for this type. Lower log level for unknown types since this is not a fatal error condition. Include the device sysfs path in the log output to allow identification of which device has problems. * src/node_device/node_device_udev.c: Add SCSI RAID type
-
由 Daniel P. Berrange 提交于
libpciaccess has many bugs in its pci_system_init/cleanup functions that makes calling them multiple times unwise. eg it will double close() FDs, and leak other FDs. * src/node_device/node_device_udev.c: Only initialize libpciaccess once
-
- 09 2月, 2011 17 次提交
-
-
由 Serge E. Hallyn 提交于
Until now, user namespaces have not done much, but (for that reason) have been innocuous to glob in with other CLONE_ flags. Upcoming userns development, however, will make tasks cloned with CLONE_NEWUSER far more restricted. In particular, for some time they will be unable to access files with anything other than the world access perms. This patch assumes that noone really needs the user namespaces to be enabled. If that is wrong, then we can try a more baroque patch where we create a file owned by a test userid with 700 perms and, if we can't access it after setuid'ing to that userid, then return 0. Otherwise, assume we are using an older, 'harmless' user namespace implementation. Comments appreciated. Is it ok to do this? Signed-off-by: NSerge Hallyn <serge.hallyn@canonical.com>
-
由 Eric Blake 提交于
* src/qemu/qemu_driver.c (qemuGetSysinfo): New function. (qemuDriver): Install it.
-
由 Eric Blake 提交于
* src/util/sysinfo.h (virSysinfoFormat): New prototype. * src/conf/domain_conf.c (virDomainSysinfoDefFormat): Move guts... * src/util/sysinfo.c (virSysinfoFormat): ...into new function. * src/libvirt_private.syms: Export it.
-
由 Eric Blake 提交于
* tools/virsh.c (cmdSysinfo): New function. (hostAndHypervisorCmds): Add it. * tools/virsh.pod: Document it.
-
由 Eric Blake 提交于
Done by editing the first three files, then running 'make -C src rpcgen', then editing src/remote_protocol-structs to match. * daemon/remote.c (remoteDispatchGetSysinfo): New function. * src/remote/remote_driver.c (remoteGetSysinfo, remote_driver): Client side serialization. * src/remote/remote_protocol.x (remote_get_sysinfo_args) (remote_get_sysinfo_ret): New types. (REMOTE_PROC_GET_SYSINFO): New enum value. * daemon/remote_dispatch_args.h: Regenerate. * daemon/remote_dispatch_prototypes.h: Likewise. * daemon/remote_dispatch_ret.h: Likewise. * daemon/remote_dispatch_table.h: Likewise. * src/remote/remote_protocol.c: Likewise. * src/remote/remote_protocol.h: Likewise. * src/remote_protocol-structs: Likewise.
-
由 Eric Blake 提交于
* src/libvirt.c (virConnectGetSysinfo): New function. * docs/formatdomain.html.in: Mention it.
-
由 Eric Blake 提交于
* src/driver.h (virDrvGetSysinfo): New typedef. (_virDriver): New callback member. * src/esx/esx_driver.c (esxDriver): Add stub for driver. * src/lxc/lxc_driver.c (lxcDriver): Likewise. * src/opennebula/one_driver.c (oneDriver): Likewise. * src/openvz/openvz_driver.c (openvzDriver): Likewise. * src/phyp/phyp_driver.c (phypDriver): Likewise. * src/qemu/qemu_driver.c (qemuDriver): Likewise. * src/remote/remote_driver.c (remote_driver): Likewise. * src/test/test_driver.c (testDriver): Likewise. * src/uml/uml_driver.c (umlDriver): Likewise. * src/vbox/vbox_tmpl.c (Driver): Likewise. * src/vmware/vmware_driver.c (vmwareDriver): Likewise. * src/xen/xen_driver.c (xenUnifiedDriver): Likewise. * src/xenapi/xenapi_driver.c (xenapiDriver): Likewise.
-
由 Eric Blake 提交于
The new virConnectGetSysinfo() API allows one to get the system information associated to a connection host, providing the same data as a guest that uses <os><smbios mode='host'/></os>, and in a format that can be pasted into the guest and edited when using <os><smbios mode='sysinfo'/></os>. * include/libvirt/libvirt.h.in (virConnectGetSysinfo): Declare. * src/libvirt_public.syms: Export new symbol.
-
由 Daniel Veillard 提交于
-
由 Michal Novotny 提交于
This adds a ibvirt-php information page with some basic information on libvirt-php project compilation, contribution and other useful information.
-
由 Gui Jianfeng 提交于
Add documentation for blkiotune elements. Signed-off-by: NGui Jianfeng <guijianfeng@cn.fujitsu.com>
-
由 Gui Jianfeng 提交于
LXC Blkio weight configuration support. Reviewed-by: N"Nikunj A. Dadhania" <nikunj@linux.vnet.ibm.com> Signed-off-by: NGui Jianfeng <guijianfeng@cn.fujitsu.com>
-
由 Gui Jianfeng 提交于
Implement blkio tunable XML configuration and parsing. Reviewed-by: N"Nikunj A. Dadhania" <nikunj@linux.vnet.ibm.com> Signed-off-by: NGui Jianfeng <guijianfeng@cn.fujitsu.com>
-
由 Gui Jianfeng 提交于
Update XML Schema for new entries. Signed-off-by: NGui Jianfeng <guijianfeng@cn.fujitsu.com>
-
由 Gui Jianfeng 提交于
Implement blkio.weight tuning API. Acked-by: NDaniel P. Berrange <berrange@redhat.com> Signed-off-by: NGui Jianfeng <guijianfeng@cn.fujitsu.com>
-
由 Gui Jianfeng 提交于
Enable cgroup hierarchy for blkio cgroup Acked-by: NDaniel P. Berrange <berrange@redhat.com> Signed-off-by: NGui Jianfeng <guijianfeng@cn.fujitsu.com>
-
由 Eric Blake 提交于
* AUTHORS: Adjust for recent commits.
-
- 08 2月, 2011 2 次提交
-
-
由 Daniel Veillard 提交于
-
由 Daniel Veillard 提交于
This reverts commit 9169c0ee. The patch didn't applied cleanly and completely broke po regeneration
-