Don't reuse the return value of virStorageBackendFileSystemIsMounted.
If it's 0, we'd return it even if the mount command failed.

Also, don't report another error if it's -1, since one has already
been reported.

Introduced by 258e06c8.

https://bugzilla.redhat.com/show_bug.cgi?id=981251
(cherry picked from commit 13fde7ce)

When creating a virtual FC HBA with virsh/libvirt API, an error message
will be returned: "error: Node device not found",
also the 'nodedev-dumpxml' shows wrong information of wwpn & wwnn
for the new created device.

Signed-off-by: xschen@tnsoft.com.cn

This reverts f90af691 which switched wwpn & wwwn in the wrong place.

https://www.kernel.org/doc/Documentation/scsi/scsi_fc_transport.txt
(cherry picked from commit 3c0d5e22)

If networkUnplugBandwidth is called on a network which has
no bandwidth defined, print a warning instead of crashing.

This can happen when destroying a domain with bandwidth if
bandwidth was removed from the network after the domain was
started.

https://bugzilla.redhat.com/show_bug.cgi?id=975359
(cherry picked from commit 658c932a)

Don't check for '\n' at the end of file if zero bytes were read.

Found by valgrind:
==404== Invalid read of size 1
==404==    at 0x529B09F: virCgroupGetValueStr (vircgroup.c:540)
==404==    by 0x529AF64: virCgroupMoveTask (vircgroup.c:1079)
==404==    by 0x1EB475: qemuSetupCgroupForEmulator (qemu_cgroup.c:1061)
==404==    by 0x1D9489: qemuProcessStart (qemu_process.c:3801)
==404==    by 0x18557E: qemuDomainObjStart (qemu_driver.c:5787)
==404==    by 0x190FA4: qemuDomainCreateWithFlags (qemu_driver.c:5839)

Introduced by 0d0b4098.

https://bugzilla.redhat.com/show_bug.cgi?id=978356
(cherry picked from commit 306c49ff)

Free the old XML strings before overwriting them if the user
has chosen to reedit the file or force the redefinition.

Found by Alex Jia trying to reproduce another bug:
https://bugzilla.redhat.com/show_bug.cgi?id=977430#c3
(cherry picked from commit 1e3a2529)

Cherry-picked from 38ada092

As a consequence of the cgroup layout changes from commit 'cfed9ad4', the
lxcDomainGetSchedulerParameters[Flags]()' and lxcGetSchedulerType() APIs
failed to return data for a non running domain.  This can be seen through
a 'virsh schedinfo <domain>' command which returns:

Scheduler      : Unknown
error: Requested operation is not valid: cgroup CPU controller is not mounted

Prior to that change a non running domain would return:

Scheduler      : posix
cpu_shares     : 0
vcpu_period    : 0
vcpu_quota     : 0
emulator_period: 0
emulator_quota : 0

This patch will restore the capability to return configuration only data
for a non running domain regardless of whether cgroups are available.

NOTE: Needed to change the VIR_STRDUP(ret, "posix"); to ret = strdup("posix");
      and added the virReportOOMError(); on failure.

Cherry-picked from b2375453

As a consequence of the cgroup layout changes from commit '632f78ca', the
qemuDomainGetSchedulerParameters[Flags]()' and qemuGetSchedulerType() APIs
failed to return data for a non running domain.  This can be seen through
a 'virsh schedinfo <domain>' command which returns:

Scheduler      : Unknown
error: Requested operation is not valid: cgroup CPU controller is not mounted

Prior to that change a non running domain would return:

Scheduler      : posix
cpu_shares     : 0
vcpu_period    : 0
vcpu_quota     : 0
emulator_period: 0
emulator_quota : 0

This patch will restore the capability to return configuration only data
for a non running domain regardless of whether cgroups are available.

NOTE: Needed to change the VIR_STRDUP(ret, "posix"); to ret = strdup("posix");
      and added the virReportOOMError(); on failure.

Don't free the stream on error if we've successfully added it
to the hash table, since it will be freed by virChrdevHashEntryFree
callback.

Preserve the error message before calling virStreamFree, since it
resets the error.

Introduced by 47161382, crashing since 69218922.

Reported by Sergey Fionov on libvir-list.
(cherry picked from commit a32b4174)

(cherry picked from commit ddf8ad82)

Change the socket path to match the one used by lockd driver.

https://bugzilla.redhat.com/show_bug.cgi?id=968128
(cherry picked from commit 70fe1295)

Use the host number as the host number when constructing the sysfs path
instead of the variable we are trying to fill.

https://bugzilla.redhat.com/show_bug.cgi?id=973543
(cherry picked from commit 371c1551)

Because it's a valid combination. p2p still uses a separate channel
for qemu migration, so there's value in letting the user specify a manual
migrate URI for overriding auto-port, or libvirt's FQDN lookup.

What _isn't_ allowed is --migrateuri and TUNNELLED, since there is
no separate migration channel. Disallow that instead
(cherry picked from commit 5e1de4fc)

Since as the code indicates it doesn't work yet, so let's be
explicit about it.
(cherry picked from commit 98bbda00)

By actually showing the Open() error to the user
(cherry picked from commit 5751fc4f)

Apps using libvirt will often have code like

   if (virXXXX() < 0) {
      virErrorPtr err = virGetLastError();
      fprintf(stderr, "Something failed: %s\n",
              err && err->message ? err->message :
              "unknown error");
      return -1;
   }

Checking for a NULL error object or message leads to very
verbose code. A virGetLastErrorMessage() helper from libvirt
can simplify this to

   if (virXXXX() < 0) {
      fprintf(stderr, "Something failed: %s\n",
              virGetLastErrorMessage());
      return -1;
   }
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
(cherry picked from commit 69c6a58a)

If we are just ejecting media, ret == -1 even after the retry loop
determines that the tray is open, as requested. This means media
disconnect always report's error.

Fix it, and fix some other mini issues:

- Don't overwrite the 'eject' error message if the retry loop fails
- Move the retries decrement inside the loop, otherwise the final loop
  might succeed, yet retries == 0 and we will raise error
- Setting ret = -1 in the disk->src check is unneeded
- Fix comment typos

cc: mprivozn@redhat.com
(cherry picked from commit 406d8a98)

In 84c59ffa I've tried to fix changing ejectable media process. The
process should go like this:

1) we need to call 'eject' on the monitor
2) we should wait for 'DEVICE_TRAY_MOVED' event
3) now we can issue 'change' command

However, while waiting in step 2) the domain monitor was locked. So
even if qemu reported the desired event, the proper callback was not
called immediately. The monitor handling code needs to lock the
monitor in order to read the event. So that's the first lock we must
not hold while waiting. The second one is the domain lock. When
monitor handling code reads an event, the appropriate callback is
called then. The first thing that each callback does is locking the
corresponding domain as a domain or its device is about to change
state. So we need to unlock both monitor and VM lock. Well, holding
any lock while sleep()-ing is not the best thing to do anyway.
(cherry picked from commit 543af79a)

qemu-img resize will fail with "The new size must be a multiple of 512"
if libvirt doesn't round it first.
This fixes rhbz#951495
Signed-off-by: NChristophe Fergeau <cfergeau@redhat.com>
(cherry picked from commit 9a8f39d0)

This patch is in relation to Bug 966449:

https://bugzilla.redhat.com/show_bug.cgi?id=966449

This is a patch addressing the coredump.

Thread 1 must be calling  nwfilterDriverRemoveDBusMatches(). It does so with
nwfilterDriverLock held. In the patch below I am now moving the
nwfilterDriverLock(driverState) further up so that the initialization, which
seems to either take a long time or is entirely stuck, occurs with the lock
held and the shutdown cannot occur at the same time.

Remove the lock in virNWFilterDriverIsWatchingFirewallD to avoid
double-locking.

(cherry picked from commit 0ec376c2)

Commit 894f7849 broke the v1.0.5-maint
branch because VIR_STRDUP() didn't exist in the v1.0.5 release so the
resulting build is missing that symbol.

This patch is only for the v1.0.5-maint branch.

Commit 7f15ebc7 introduced a bug
happening when guests without a <graphics> element are migrated.
The initialization of listenAddress happens unconditionally
from the cookie even if the cookie->graphics pointer was NULL.
Moved the initialization to where it is safe.
Signed-off-by: NViktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
(cherry picked from commit 9684bb11)

This should resolve:

  https://bugzilla.redhat.com/show_bug.cgi?id=959191

The problem was that qemuUpdateActivePciHostdevs was returning 0
(success) when no hostdevs were present, but would otherwise return -1
(failure) even when it completed successfully. It is only called from
qemuProcessReconnect(), and when qemuProcessReconnect got back an
error, it would not only stop reconnecting, but would terminate the
guest qemu process "to remove danger of it ending up running twice if
user tries to start it again later".

(This bug was introduced in commit 011cf7ad, which was pushed between
v1.0.2 and v1.0.3, so all maintenance branches from v1.0.3 up to 1.0.5
will need this one line patch applied.)
(cherry picked from commit 2ea45647)

A literal IPv6 must be escaped, otherwise migration fails with:
unable to execute QEMU command 'drive-mirror': address resolution failed
for f0::0d:5901: Servname not supported for ai_socktype
since QEMU treats everything after the first ':' as the port.
(cherry picked from commit 2136327e)

gcc 4.1.2 (hello, RHEL 5!) fails to build on 32-bit platforms with:

conf/domain_conf.c: In function 'virDomainDefParseXML':
conf/domain_conf.c:10581: warning: integer constant is too large for 'long' type

Problem introduced in commit f8e3221f.

* src/conf/domain_conf.c (virDomainDefParseXML): Mark large constants.
Signed-off-by: NEric Blake <eblake@redhat.com>
(cherry picked from commit f6817c70)

Since f03dcc5d we use [::] as the listening address both on qemu
command line in -incoming and in nbd-server-start QMP command.
However the latter requires just :: without the braces.
(cherry picked from commit 23260064)

https://bugzilla.redhat.com/show_bug.cgi?id=965169 documents a
problem starting domains when cgroups are enabled; I was able
to reliably reproduce the race about 5% of the time when I added
hooks to domain startup by 3 seconds (as that seemed to be about
the length of time that qemu created and then closed a temporary
thread, probably related to aio handling of initially opening
a disk image).  The problem has existed since we introduced
virCgroupMoveTask in commit 91028296 (v0.10.0).

There are some inherent TOCTTOU races when moving tasks between
kernel cgroups, precisely because threads can be created or
completed in the window between when we read a thread id from the
source and when we write to the destination.  As the goal of
virCgroupMoveTask is merely to move ALL tasks into the new
cgroup, it is sufficient to iterate until no more threads are
being created in the old group, and ignoring any threads that
die before we can move them.

It would be nicer to start the threads in the right cgroup to
begin with, but by default, all child threads are created in
the same cgroup as their parent, and we don't want vcpu child
threads in the emulator cgroup, so I don't see any good way
of avoiding the move.  It would also be nice if the kernel were
to implement something like rename() as a way to atomically move
a group of threads from one cgroup to another, instead of forcing
a window where we have to read and parse the source, then format
and write back into the destination.

* src/util/vircgroup.c (virCgroupAddTaskStrController): Ignore
ESRCH, because a thread ended between read and write attempts.
(virCgroupMoveTask): Loop until all threads have moved.
Signed-off-by: NEric Blake <eblake@redhat.com>
(cherry picked from commit 83e4c775)

'make check' fails since commit 470d5c46 on any system with dash
as /bin/sh, because '<<<' is a bash extension.  For example:

nwfilterschematest: 23: /home/eblake/libvirt/tests/schematestutils.sh: Syntax error: redirection unexpected

Also, there is no need to spawn a grep process when shell globbing
can do the same.

* tests/schematestutils.sh: Replace bashism and subprocess with a
faster and portable construct.
Signed-off-by: NEric Blake <eblake@redhat.com>
(cherry picked from commit 1d21b884)

Commit 632f78ca introduced a regression which causes schedinfo being
unable to set some parameters.  When migrating to priv->cgroup there
was missing variable left out and due to passed NULL to underlying
function, the setting failed.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=963592

CVE-2013-1962

remoteDispatchStoragePoolListAllVolumes wasn't freeing the pool.
The pool also held a reference to the connection, preventing it from
getting freed and closing the netcf interface driver, which held two
sockets open.
(cherry picked from commit ca697e90)

bz #960879

In b2878ed8 we added the O_NOCTTY
flag when opening files in the stream code. Unfortunately a later
piece of code was comparing the flags == O_RDONLY, without masking
out the non-access mode flags. This broke the iohelper when used
with streams for read, since it caused us to attach the stream
output pipe to the stream input FD instead of output FD :-(
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
(cherry picked from commit a2214c52)

This resolves:

     https://bugzilla.redhat.com/show_bug.cgi?id=851411
     https://bugzilla.redhat.com/show_bug.cgi?id=955500

The first problem was that virFileOpenAs was returning fd (-1) in one
of the error cases rather than ret (-errno), so the caller thought
that the error was EPERM rather than ENOENT.

The second problem was that some log messages in the general purpose
qemuOpenFile() function would always say "Failed to create" even if
the caller hadn't included O_CREAT (i.e. they were trying to open an
existing file).

This fixes virFileOpenAs to jump down to the error return (which
returns ret instead of fd) in the previously mentioned incorrect
failure case of virFileOpenAs(), removes all error logging from
virFileOpenAs() (since the callers report it), and modifies
qemuOpenFile to appropriately use "open" or "create" in its log
messages.

NB: I seriously considered removing logging from all callers of
virFileOpenAs(), but there is at least one case where the caller
doesn't want virFileOpenAs() to log any errors, because it's just
going to try again (qemuOpenFile()). We can't simply make a silent
variation of virFileOpenAs() though, because qemuOpenFile() can't make
the decision about whether or not it wants to retry until after
virFileOpenAs() has already returned an error code.

Likewise, I also considered changing virFileOpenAs() to return -1 with
errno set on return, and may still do that, but only as a separate
patch, as it obscures the intent of this patch too much.
(cherry picked from commit a2c1bedb)

(cherry picked from commit 413274f6)

The controller element supports non-disk controller types too.

https://bugzilla.redhat.com/show_bug.cgi?id=960958
(cherry picked from commit c075f89f)

Print an error instead of crashing when a TPM device without
a backend is specified.

Add a test for tpm device with no backend, which should fail
with a parse error.

https://bugzilla.redhat.com/show_bug.cgi?id=961252
(cherry picked from commit 1d96440a)

Currently, using an invalid XML in tests fails, because
the schema test expects all of them to be valid.

Treat files with -invalid.xml suffix as invalid and expect
them to fail validation.
(cherry picked from commit 470d5c46)

VFIO device assignment requires a cgroup ACL to be setup for access to
the /dev/vfio/nn "group" device for any devices that will be assigned
to a guest. In the case of a host device that is allocated from a
pool, it was being allocated during qemuBuildCommandLine(), which is
called by qemuProcessStart() *after* the all-encompassing
qemuSetupCgroup() was called, meaning that the standard Cgroup ACL
setup wasn't creating ACLs for these devices allocated from pools.

One possible solution was to manually add a single ACL down inside
qemuBuildCommandLine() when networkAllocateActualDevice() is called,
but that has two problems: 1) the function that adds the cgroup ACL
requires a virDomainObjPtr, which isn't available in
qemuBuildCommandLine(), and 2) we really shouldn't be doing network
device setup inside qemuBuildCommandLine() anyway.

Instead, I've created a new function called
qemuNetworkPrepareDevices() which is called just before
qemuPrepareHostDevices() during qemuProcessStart() (explanation of
ordering in the comments), i.e. well before the call to
qemuSetupCgroup(). To minimize code churn in a patch that will be
backported to 1.0.5-maint, qemuNetworkPrepareDevices only does
networkAllocateActualDevice() and the bare amount of setup required
for type='hostdev network devices, but it eventually should do *all*
device setup for guest network devices.

Note that some of the code that was previously needed in
qemuBuildCommandLine() is no longer required when
networkAllocateActualDevice() is called earlier:

 * qemuAssignDeviceHostdevAlias() is already done further down in
   qemuProcessStart().

 * qemuPrepareHostdevPCIDevices() is called by
   qemuPrepareHostDevices() which is called after
   qemuNetworkPrepareDevices() in qemuProcessStart().

As hinted above, this new function should be moved into a separate
qemu_network.c (or similarly named) file along with
qemuPhysIfaceConnect(), qemuNetworkIfaceConnect(), and
qemuOpenVhostNet(), and expanded to call those functions as well, then
the nnets loop in qemuBuildCommandLine() should be reduced to only
build the commandline string (which itself can be in a separate
qemuInterfaceBuilldCommandLine() function as suggested by
Michal). However, this will require storing away an array of tapfd and
vhostfd that are needed for the commandline, so I would rather do that
in a separate patch and leave this patch at the minimum to fix the
bug.
(cherry picked from commit 8cd40e7e)

In the non linux case some callers like gather_scsi_host_caps needed the
return code of -1 while others like update_caps needed an empty
statement (to avoid a "statement without effect" warning). This is much
simpler solved by using a function instead of a define.
(cherry picked from commit 58662f44)

since it uses glibc's rpcgen.
(cherry picked from commit b562d7b7)