- 11 6月, 2010 3 次提交
-
-
由 Matthias Bolte 提交于
Otherwise this will segfault if DISPLAY is not defined.
-
由 Matthias Bolte 提交于
Otherwise this will segfault if PATH is not defined. Reported by Emre Erenoglu
-
由 Justin Clift 提交于
This patch adds two new parameters to the vol-create-as command: --backing-vol <volume-name-or-key-or-path> --backing-vol-format <format-of-backing-vol> virsh # vol-create-as guest_images_lvm snapvol1 5G --backing-vol \ rhel6vm1lun1 Vol snapvol1 created virsh # vol-create-as image_dir qcow2snap2 5G --format qcow2 \ --backing-vol imagevol1.qcow2 \ --backing-vol-format qcow2 Vol qcow2snap2 created Additionally, the virsh man page update fixes incorrect snapshot parameters that were included in my prior bulk volume command patch.
-
- 10 6月, 2010 2 次提交
-
-
由 Eric Blake 提交于
On Fedora 13 with sufficient mingw32-* packages installed, running ./autobuild.sh failed to cross-compile to mingw because mingw32-pthreads installed a broken <pthread.h>. With that issue fixed, the build still failed due to use of O_SYNC. Meanwhile, recent .spec.in changes got out of sync. * bootstrap.conf (gnulib_modules): Add fcntl-h, for O_SYNC. * .gnulib: Update to latest, to work around buggy pthreads-win32 library. * bootstrap: Import latest from gnulib. * mingw32-libvirt.spec.in: Distribute new file.
-
由 Eric Blake 提交于
* src/util/threads.c (includes) [WIN32]: On mingw, favor native threading over pthreads-win32 library. * src/util/thread.h [WIN32] Likewise. Suggested by Daniel P. Berrange.
-
- 09 6月, 2010 13 次提交
-
-
由 Daniel P. Berrange 提交于
When a disk is on a root squashed NFS server, it may not be possible to stat() the disk file in virCgroupAllowDevice. The virStorageFileGetMeta method may also fail to extract the parent backing store. Both of these errors have to be ignored to avoid breaking NFS deployments * src/qemu/qemu_driver.c: Ignore errors in cgroup setup to keep root squash NFS happy
-
由 Justin Clift 提交于
-
由 Justin Clift 提交于
With libvirt and virsh now being used for much more than Xen, this patch removes the outdated reference to Xen in the file header.
-
由 Matthias Bolte 提交于
Allow to specify a proxy to be used by libcurl.
-
由 Matthias Bolte 提交于
Pass a struct containing the parameters instead of passing each one individually. This make future extensions a bit simpler.
-
由 Justin Clift 提交于
This patch also includes the new vol-pool command.
-
由 Justin Clift 提交于
This patch adds a new "vol-pool" command to virsh, to round out the identifier conversion functions for volumes in virsh. Now it is possible to work with volumes when starting from just a volume key or volume path.
-
由 Eric Blake 提交于
* tools/virsh.c (opts_create): Add --paused option. (cmdCreate): Pass appropriate flag. * tools/virsh.pod: Document it.
-
由 Eric Blake 提交于
https://bugzilla.redhat.com/show_bug.cgi?id=589465 Some guests (eg with badly configured grub, or Windows' installation cd) require quick response from the console user. That's why we have a "launchPaused" option in vdsm. To implement it via libvirt, we need to ask libvirt not to call qemuMonitorStartCPUs() after starting qemu. Calling virDomainStop immediately after the domain is up is inherently raceful. * src/qemu/qemu_driver.c (qemudStartVMDaemon): Add new parameter; all callers adjusted. (qemudDomainCreate): Implement support for new flag.
-
由 Eric Blake 提交于
* include/libvirt/libvirt.h.in (virDomainCreateFlags): Add VIR_DOMAIN_START_PAUSED. * src/libvirt.c (virDomainCreateXML): Update documentation. * src/lxc/lxc_driver.c (lxcDomainCreateAndStart): Reject new flag as unimplemented. * src/opennebula/one_driver.c (oneDomainCreateAndStart): Likewise. * src/openvz/openvz_driver.c (openvzDomainCreateXML): Likewise. * src/phyp/phyp_driver.c (phypDomainCreateAndStart): Likewise. * src/qemu/qemu_driver.c (qemudDomainCreate): Likewise. * src/test/test_driver.c (testDomainCreateXML): Likewise. * src/uml/uml_driver.c (umlDomainCreate): Likewise. * src/vbox/vbox_tmpl.c (vboxDomainCreateXML): Likewise. * src/xen/xend_internal.c (xenDaemonCreateXML): Likewise. * src/xenapi/xenapi_driver.c (xenapiDomainCreateXML): Likewise.
-
由 David Allan 提交于
* This patch is a modification of a patch submitted by Nigel Jones. It fixes several memory leaks on device addition/removal: 1. Free the virNodeDeviceDefPtr in udevAddOneDevice if the return value is non-zero 2. Always release the node device reference after the device has been processed. * Refactored for better readability per the suggestion of clalance
-
由 David Allan 提交于
* Fix broken rng schema * Add test input & output files
-
由 David Allan 提交于
* Use virBufferEscapeString() per Dan B.
-
- 08 6月, 2010 17 次提交
-
-
由 Daniel P. Berrange 提交于
The virtio serial changes broke the test suite because they forgot to add the new address attribute to the domain XML schema. The xml2xml test also broke because the XML no longer roundtrips. This is due to testing of auto-addition of <controller> elements. Split that test case off into a separate XML file to avoid breakage * docs/schemas/domain.rng: Allow port number for virtio serial addresses * tests/qemuxml2argvdata/qemuxml2argv-channel-virtio.args, tests/qemuxml2argvdata/qemuxml2argv-channel-virtio.xml: Revert to a simple config to avoid breaking xml2xml test * tests/qemuxml2argvdata/qemuxml2argv-channel-virtio-auto.xml, tests/qemuxml2argvdata/qemuxml2argv-channel-virtio-auto.args: Add complex test case for auto-controller addition for xml2argv test * tests/qemuxml2argvtest.c: Add channel-virtio-auto test
-
由 Daniel P. Berrange 提交于
A look at the QEMU source revealed the missing bits of info about the VPC file format, so we can enable this now * src/util/storage_file.c: Enable VPC format, providing version and disk size offset fields
-
由 Daniel P. Berrange 提交于
When an attempt to hotplug a PCI device to a guest fails, the device was left attached to pci-stub. It is neccessary to reset the device and then attach it to the host driver again. * src/qemu/qemu_driver.c: Reattach PCI device to host if hotadd fails
-
由 Daniel P. Berrange 提交于
The restore code is done in places where errors cannot be raised, since they will overwrite over pre-existing errors. * src/security/security_selinux.c: Only warn about failures in label restore, don't report errors
-
由 Daniel P. Berrange 提交于
Any output at all from device_add indicates an error in the command execution. Thus it needs to check for reply != "" * src/qemu/qemu_monitor_text.c: Fix reply check for errors to treat any output as an error
-
由 Daniel P. Berrange 提交于
HAL is deprecated and UDEV is the future. Thus if both options are compiled, we should prefer use of UDEV over HAL * src/node_device/node_device_driver.c: Switch init order to try UDEV first, then HAL
-
由 Daniel J Walsh 提交于
When SELinux is running in MLS mode, libvirtd will have a different security level to the VMs. For libvirtd to be able to connect to the monitor console, the client end of the UNIX domain socket needs a different label. This adds infrastructure to set the socket label via the security driver framework * src/qemu/qemu_driver.c: Call out to socket label APIs in security driver * src/qemu/qemu_security_stacked.c: Wire up socket label drivers * src/security/security_driver.h: Define security driver entry points for socket labelling * src/security/security_selinux.c: Set socket label based on VM label
-
由 Daniel P. Berrange 提交于
The network driver is not doing correct checking for duplicate UUID/name values. This introduces a new method virNetworkObjIsDuplicate, based on the previously written virDomainObjIsDuplicate. * src/conf/network_conf.c, src/conf/network_conf.c, src/libvirt_private.syms: Add virNetworkObjIsDuplicate, * src/network/bridge_driver.c: Call virNetworkObjIsDuplicate for checking uniqueness of uuid/names
-
由 Daniel P. Berrange 提交于
The storage pool driver is mistakenly using the error code VIR_ERR_INVALID_STORAGE_POOL which is for diagnosing invalid pointers. This patch switches it to use VIR_ERR_NO_STORAGE_POOL which is the correct code for cases where the storage pool does not exist * src/storage/storage_driver.c: Replace VIR_ERR_INVALID_STORAGE_POOL with VIR_ERR_NO_STORAGE_POOL
-
由 Daniel P. Berrange 提交于
The storage pool driver is not doing correct checking for duplicate UUID/name values. This introduces a new method virStoragePoolObjIsDuplicate, based on the previously written virDomainObjIsDuplicate. * src/conf/storage_conf.c, src/conf/storage_conf.c, src/libvirt_private.syms: Add virStoragePoolObjIsDuplicate, * src/storage/storage_driver.c: Call virStoragePoolObjIsDuplicate for checking uniqueness of uuid/names
-
由 Daniel P. Berrange 提交于
The domain parsing code would auto-add a virtio serial controller if it saw any virtio serial channel defined. Unfortunately it always added a controller with index=0, even if the channel address specified an index != 0. It only added one controller, even if multiple controllers were referenced by channels. Finally, it let the ports+vectors parameters initialize to zero instead of -1, which prevented the controllers accepting any ports. * src/conf/domain_conf.c: Initialize ports+vectors when adding virtio serial controllers. Add all neccessary virtio serial controllers, instead of hardcoding controller 0 * qemuxml2argvdata/qemuxml2argv-channel-virtio.args, qemuxml2argvdata/qemuxml2argv-channel-virtio.xml: Expand to test controller auto-add behaviour
-
由 Daniel P. Berrange 提交于
To ensure that the device addressing scheme is stable across hotplug/unplug, all virtio serial channels needs to have an associated port number in their address. This is then specified to QEMU using the nr=NNN parameter * src/conf/domain_conf.c, src/conf/domain_conf.h: Parsing for port number in vioserial address types. * src/qemu/qemu_conf.c: Set 'nr=NNN' parameter with virtio serial port number * tests/qemuxml2argvdata/qemuxml2argv-channel-virtio.args, tests/qemuxml2argvdata/qemuxml2argv-channel-virtio.xml: Expand data set to ensure coverage of port addressing
-
由 Daniel P. Berrange 提交于
QEMU upstream decided against adding a 'reason' field to the block IO event in QMP. Disable this code to remove a annoying warning message. It will be renabled when the error string reason is re-introduced in QEMU
-
由 Daniel P. Berrange 提交于
When libvirtd exits it is leaving UNIX domain sockets on the filesystem. These need to be removed. The qemudInitPaths() method has signficant code churn to switch from using a pre-allocated buffer on the stack, to dynamically allocating on the heap. * daemon/libvirtd.c, daemon/libvirtd.h: Store a reference to the UNIX domain socket path and unlink it on shutdown
-
由 Justin Clift 提交于
Signed-off-by: NEric Blake <eblake@redhat.com>
-
由 Jamie Strandboge 提交于
Refactor to update AppArmor security driver to adjust profile for save/restore. This addresses the following bugs: https://bugzilla.redhat.com/show_bug.cgi?id=529363 https://bugs.launchpad.net/ubuntu/+source/libvirt/+bug/457716
-
由 Jamie Strandboge 提交于
Adjust args to qemudStartVMDaemon() to also specify path to stdin_fd, so this can be passed to the AppArmor driver via SetSecurityAllLabel(). This updates all calls to qemudStartVMDaemon() as well as setting up the non-AppArmor security driver *SetSecurityAllLabel() declarations for the above. This is required for the following "apparmor-fix-save-restore" patch since AppArmor resolves the passed file descriptor to the pathname given to open().
-
- 06 6月, 2010 1 次提交
-
-
由 Jim Meyering 提交于
* .mailmap: Map a stray commit-author email address to the canonical one. Reported by Justin Clift.
-
- 05 6月, 2010 4 次提交
-
-
由 Laine Stump 提交于
See https://bugzilla.redhat.com/show_bug.cgi?id=599091 Saving a paused 512MB domain took 3m47s with the old block size of 512 bytes. Changing the block size to 1024*1024 decreased the time to 56 seconds. (Doubling again to 2048*1024 yielded 0 improvement; lowering to 512k increased the save time to 1m10s, about 20%)
-
由 Laine Stump 提交于
The pointer to the xml describing the domain is saved into an object prior to calling VIR_REALLOC_N() to make the size of the memory it points to a multiple of QEMU_MONITOR_MIGRATE_TO_FILE_BS. If that operation needs to allocate new memory, the pointer that was saved is no longer valid. To avoid this situation, adjust the size *before* saving the pointer. (This showed up when experimenting with very large values of QEMU_MONITOR_MIGRATE_TO_FILE_BS).
-
由 Jim Fehlig 提交于
Fixes for issues in commit 211dd1e9 noted by by Jim Meyering. 1. Allocate content buffer of size content_length + 1 to ensure NUL-termination. 2. Limit content buffer size to 64k 3. Fix whitespace issue V2: - Add comment to clarify allocation of content buffer - Add ATTRIBUTE_NONNULL where appropriate - User NULLSTR macro
-
由 Eric Blake 提交于
* autobuild.sh: Replace 'set -o pipefail' with POSIX alternative. Reported by Matthias Bolte.
-