Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

When a hypervisor marks a CPU model as unusable on the current host, it
may also give us a list of features which prevent the model from being
usable. Storing this list in virDomainCapsCPUModel will help the CPU
driver with creating a host-model CPU configuration.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

https://bugzilla.redhat.com/show_bug.cgi?id=1497396

In 0d3d020b I've added capability to accept MAC addresses
for the API too. However, the implementation was faulty. It needs
to lookup the corresponding interface in the domain definition
and pass the ifname instead of MAC address.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

https://bugzilla.redhat.com/show_bug.cgi?id=1497396

The other APIs accept both, ifname and MAC address. There's no
reason virDomainInterfaceStats can't do the same.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Every caller reports the error themselves. Might as well move it
into the function and thus unify it.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

The command "info migrate" of qemu outputs the dirty-pages-rate during
migration, but page size is different in different architectures. So
page size should be output to calculate dirty pages in bytes.

Page size is already implemented with commit
030ce1f8612215fcbe9d353dfeaeb2937f8e3f94 in qemu.
Now Implement the counter-part in libvirt.
Signed-off-by: NChao Fan <fanc.fnst@cn.fujitsu.com>
Signed-off-by: NLi Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

Calling JOB_MASK(QEMU_JOB_NONE) would result in 1 << -1.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

The address is restricted to 0:0:1.2 only for the piix3-uhci controller
at index 0.

https://bugzilla.redhat.com/show_bug.cgi?id=1460602

Parse the -M (or -machine) command line option before starting
processing in earnest and have a fallback ready in case it's not
present, so that while parsing other options we can rely on
def->os.machine being initialized.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1379218Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NDaniel P. Berrange <berrange@redhat.com>

Signed-off-by: NKothapally Madhu Pavan <kmp@linux.vnet.ibm.com>

Skip purging the backing chain and redetecting it when it was not going
to change during the time we were not present.

The decision is based on the new flag which records whether there were
blockjobs running to the status XML.

Add a helper variable so that we don't have to access the disk via 3
indirections.

Note when no blockjobs are running in the status XML so that we know
that the backing chain will not change until we reconnect.

https://bugzilla.redhat.com/show_bug.cgi?id=1447169Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

https://bugzilla.redhat.com/show_bug.cgi?id=1447169

Since domain can have at most one watchdog it simplifies things a
bit. However, since we must be able to set the watchdog action as
well, new monitor command needs to be used.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Currently we don't do it. Therefore we accept senseless
combinations of models and buses they are attached to.
Moreover, diag288 watchdog is exclusive to s390(x).
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Few jobs (which don't) use the 'mirror' element did not save the status
XML. It will be helpful to do so once we start tracking jobs fully.

For VMs with persistent config the config may change upon successful
completion of a job. Save it always if a persistent VM finishes a
blockjob. This will simplify further additions.

The status XML would be saved only for the copy job (in case of success)
or on failure even for other jobs. As the status contains the backing
chain data, which change after success we should always save it on
block job completion.

Checking of disk presence accesses storage on the host so it should be
done from the host setup function. Move the code to new function called
qemuProcessPrepareHostStorage and remove qemuDomainCheckDiskPresence.

Introduce a new function to prepare domain disks which will also do the
volume source to actual disk source translation.

The 'pretend' condition is not transferred to the new location since it
does not help in writing tests and also no tests abuse it.

Pass flags to the function rather than just whether we have incoming
migration. This also enforces correct startup policy for USB devices
when reverting from a snapshot.

qemuMigrationPrepareAny called multiple of the functions starting the
qemu process for incoming migration by adding the flags explicitly.
Extract them to a variable so that they can be easily used for other
calls or changed in the future.

Document mainly what flag values are passed in.

Apart from not littering the command line generator, the added benefit
is that new configs with a FDC will be rejected at define stage.

Remove validation code into a separate function so that it's not
interleaved with actual building of the command line.

Similarly to previous patch, for some types of interface domain
and host are on the same side of RX/TX barrier. In that case, we
need to set up the QoS differently. Well, swapped.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

https://bugzilla.redhat.com/show_bug.cgi?id=1497410

The comment in virNetDevTapInterfaceStats() implementation for
Linux states that packets transmitted by domain are received by
the host and vice versa. Well, this is true but not for all types
of interfaces. For instance, for macvtaps when TAP device is
hooked right onto a physical device any packet that domain sends
looks also like a packet sent to the host. Therefore, we should
allow caller to chose if the stats returned should be straight
copy or swapped.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Users might have configured interface so that it's type of
network, but the corresponding network plugs interfaces into an
OVS bridge. Therefore, we have to check for the actual type of
the interface instead of the configured one.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

qemu 2.7.0 introduces multiqueue virtio-blk(commit 2f27059).
This patch introduces a new attribute "queues". An example of
the XML:

<disk type='file' device='disk'>
  <driver name='qemu' type='qcow2' queues='4'/>

The corresponding QEMU command line:

-device virtio-blk-pci,scsi=off,num-queues=4,id=virtio-disk0
Signed-off-by: NLin Ma <lma@suse.com>
Signed-off-by: NJán Tomko <jtomko@redhat.com>

Signed-off-by: NLin Ma <lma@suse.com>

Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NErik Skultety <eskultet@redhat.com>

Alter qemu command line generation in order to possibly add TLS for
a suitably configured domain.

Sample TLS args generated by libvirt -

    -object tls-creds-x509,id=objvirtio-disk0_tls0,dir=/etc/pki/qemu,\
    endpoint=client,verify-peer=yes \
    -drive file.driver=vxhs,file.tls-creds=objvirtio-disk0_tls0,\
    file.vdisk-id=eb90327c-8302-4725-9e1b-4e85ed4dc251,\
    file.server.type=tcp,file.server.host=192.168.0.1,\
    file.server.port=9999,format=raw,if=none,\
    id=drive-virtio-disk0,cache=none \
    -device virtio-blk-pci,bus=pci.0,addr=0x4,drive=drive-virtio-disk0,\
    id=virtio-disk0

Update the qemuxml2argvtest with a couple of examples. One for a
simple case and the other a bit more complex where multiple VxHS disks
are added where at least one uses a VxHS that doesn't require TLS
credentials and thus sets the domain disk source attribute "tls = 'no'".

Update the hotplug to be able to handle processing the tlsAlias whether
it's to add the TLS object when hotplugging a disk or to remove the TLS
object when hot unplugging a disk.  The hot plug/unplug code is largely
generic, but the addition code does make the VXHS specific checks only
because it needs to grab the correct config directory and generate the
object as the command line would do.
Signed-off-by: NAshish Mittal <Ashish.Mittal@veritas.com>
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Introduce a function to setup any TLS needs for a disk source.

If there's a configuration or other error setting up the disk source
for TLS, then cause the domain startup to fail.

For VxHS, follow the chardevTLS model where if the src->haveTLS hasn't
been configured, then take the system/global cfg->haveTLS setting for
the storage source *and* mark that we've done so via the tlsFromConfig
setting in storage source.

Next, if we are using TLS, then generate an alias into a virStorageSource
'tlsAlias' field that will be used to create the TLS object and added to
the disk object in order to link the two together for QEMU.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Add a new TLS X.509 certificate type - "vxhs". This will handle the
creation of a TLS certificate capability for properly configured
VxHS network block device clients.

The following describes the behavior of TLS for VxHS block device:

  (1) Two new options have been added in /etc/libvirt/qemu.conf
      to control TLS behavior with VxHS block devices
      "vxhs_tls" and "vxhs_tls_x509_cert_dir".
  (2) Setting "vxhs_tls=1" in /etc/libvirt/qemu.conf will enable
      TLS for VxHS block devices.
  (3) "vxhs_tls_x509_cert_dir" can be set to the full path where the
      TLS CA certificate and the client certificate and keys are saved.
      If this value is missing, the "default_tls_x509_cert_dir" will be
      used instead. If the environment is not configured properly the
      authentication to the VxHS server will fail.
Signed-off-by: NAshish Mittal <Ashish.Mittal@veritas.com>
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

VM private data is cleared when the VM is turned off and also when the
VM object is being freed. Some of the clearing code was duplicated.
Extract it to a separate function.

This also removes the now unnecessary function
qemuDomainClearPrivatePaths.

Use an empty string to let qemu fill out the default.
This matches what's done in qemuBuildChrChardevStr.

https://bugzilla.redhat.com/show_bug.cgi?id=1454671Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>