The virRotatingFileWriterAppend method leaks the file->entry
on the virRotatingFileWriterEntryNew failing path.

Assigning value true to @success if there is no volumes, that stored value is not used.

Since refactoring by commit id '3dd859c0', @maxcpu is no longer used.

Variable def going out of scope leaks the storage def.source.hosts points to.

Use MD5_DIGEST_SIZE or VIR_UUID_BUFLEN rather than VIR_UUID_STRING_BUFLEN
when compare @uuid with @md5.

Assigning value 0 to @nboards in success path, that stored value is not used.

Fix the build with clang:
util/virperf.c:86:27: error: use of GNU 'missing =' extension
    in designator [-Werror,-Wgnu-designator]
    [VIR_PERF_EVENT_MBML] {
                          ^
                          =

If you specify disks to migrate it would be possible to select an empty
drive for migration. Reject such config.

Use the proper check whether a disk is empty.

The code that validates whether an internal snapshot is possible would
reject an empty but not-readonly drive. Since floppies can have this
property, add a check for emptiness.

The property is necessary also for the disk using the source (e.g. cdrom)
which needs to be kept readonly.

Commit '462c4b66' was a bit too aggressive in this aspect, since the
readonly flag is set only while parsing.

Properly error out when the user requests a port from a bus
that does not have a controller present in the domain XML.

https://bugzilla.redhat.com/show_bug.cgi?id=1441589

Commit 4f4c3b13 added code to remember errors during freeing
of domain objects. This changed the output when testing scaled numbers
parsing in virsh-optparse. Adjust the expected output.

The virPerfGetEvent method pointlessly checks for a NULL
parameter and the range of an enum value. The whole point
of using an enum is that we can avoid such checks. Just
replace calls to virPerfGetEvent, with perf->events[type]
array access.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

The virPerfGetEventAttr method contains a totally pointless
loop. Remove it, verify the array size statically, and then
just use an array index to access the perf event.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

==20406== 8 bytes in 1 blocks are definitely lost in loss record 24 of 1,059
==20406==    at 0x4C2CF55: calloc (vg_replace_malloc.c:711)
==20406==    by 0x54BF530: virAllocN (viralloc.c:191)
==20406==    by 0x54D37C4: virConfGetValueStringList (virconf.c:1001)
==20406==    by 0x144E4E8E: virQEMUDriverConfigLoadFile (qemu_conf.c:835)
==20406==    by 0x1452A744: qemuStateInitialize (qemu_driver.c:664)
==20406==    by 0x55DB585: virStateInitialize (libvirt.c:770)
==20406==    by 0x124570: daemonRunStateInit (libvirtd.c:881)
==20406==    by 0x5532990: virThreadHelper (virthread.c:206)
==20406==    by 0x8C82493: start_thread (in /lib64/libpthread-2.24.so)
==20406==    by 0x8F7FA1E: clone (in /lib64/libc-2.24.so)

==20406== 4 bytes in 1 blocks are definitely lost in loss record 6 of 1,059
==20406==    at 0x4C2AF3F: malloc (vg_replace_malloc.c:299)
==20406==    by 0x8F17D39: strdup (in /lib64/libc-2.24.so)
==20406==    by 0x552C0E0: virStrdup (virstring.c:784)
==20406==    by 0x54D3622: virConfGetValueString (virconf.c:945)
==20406==    by 0x144E4692: virQEMUDriverConfigLoadFile (qemu_conf.c:687)
==20406==    by 0x1452A744: qemuStateInitialize (qemu_driver.c:664)
==20406==    by 0x55DB585: virStateInitialize (libvirt.c:770)
==20406==    by 0x124570: daemonRunStateInit (libvirtd.c:881)
==20406==    by 0x5532990: virThreadHelper (virthread.c:206)
==20406==    by 0x8C82493: start_thread (in /lib64/libpthread-2.24.so)
==20406==    by 0x8F7FA1E: clone (in /lib64/libc-2.24.so)

Use the new XML helpers and use virXPathString rather than hand-rolling
the code.

Reuse virshDomainGetXML and virshDomainGetXMLFromDom.

Reuse virshDomainGetXML and virshDomainGetXMLFromDom.

In virsh we quite often get the domain XML just to initialize the XPath
parser so that we can extract information.

Add helpers which will simplify this by wrapping the getting of the XML
and parsing it along with error reporting.

Additionally a second helper also gets the domain object from the
parameters and releases it so that functions which need the XML as only
source of data can be simplified further.

Avoid the annoying issue where the public object freeing APIs overwrite
the error set by helper functions, since they don't invoke the callback.

The new helper remembers the error only if no previous error was set.

Similarly to virshDomainFree add a wrapper for the snapshot object
freeing function.

virDomainFree has it's quirks (does not like NULL pointers, resets
libvirt errors). Replace it by a virsh helper which will allow us to
centrally fix issues with it.

The syntax-check rule will prohibit new uses of virDomainFree.

Move virshLookupDomainBy, virshCommandOptDomainBy and
virshCommandOptDomainBy to the helper file. Additionally turn the
virshCommandOptDomainBy macro into a function.

Don't accumulate helpers in virsh.c

Commit a4a39d90 added a check that checks for VFIO support with mediated
devices. The problem is that the hostdev preparing functions behave like
a fallthrough if device of that specific type doesn't exist. However,
the check for VFIO support was independent of the existence of a mdev
device which caused the guest to fail to start with any device to be
directly assigned if VFIO was disabled/unavailable in the kernel.
The proposed change first ensures that it makes sense to check for VFIO
support in the first place, and only then performs the VFIO support check
itself.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1441291Signed-off-by: NErik Skultety <eskultet@redhat.com>

Coverity complains about virBufferCurrentContent might be return null
when calling strlen, so check virBufferError first before calling
strlen.

On virGetInterface failure, call virInterfaceDefFree for the @def.

==18591== 16 bytes in 1 blocks are definitely lost in loss record 41 of 183
==18591==    at 0x4C2B934: calloc (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
==18591==    by 0x54EBB1C: virAllocN (viralloc.c:191)
==18591==    by 0x1628CA: _vshMalloc (vsh.c:136)
==18591==    by 0x1344C4: virshVcpuPinQuery (virsh-domain.c:6603)
==18591==    by 0x1344C4: cmdVcpuPin (virsh-domain.c:6707)
==18591==    by 0x1631BF: vshCommandRun (vsh.c:1312)
==18591==    by 0x12DBB1: main (virsh.c:961)

Create a couple of helpers that will perform the same call sequence.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Alter virStoragePoolObjListExport in order to pass the drivers->pools
by reference
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Mostly code motion to move storageConnectList[Defined]StoragePools
and similar test driver code into virstorageobj.c and rename to
virStoragePoolObjGetNames.

Also includes a couple of variable name adjustments to keep code consistent
with other drivers.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Unify the NumOf[Defined]StoragePools API into virstorageobj.c from
storage_driver and test_driver.  The only real difference between the
two is the test driver doesn't call using the aclfilter API.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Essentially code motion to move the storage/test driver ListAllVolumes
logic into virstorageobj.c
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Mostly code motion to move storagePoolListVolumes code into virstorageobj.c
and rename to virStoragePoolObjVolumeGetNames.

Also includes a couple of variable name adjustments to keep code consistent
with other drivers.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Unify the NumOfVolumes API into virstorageobj.c from storage_driver and
test_driver.  The only real difference between the two is the test driver
doesn't call using the aclfilter API.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

This removes the hacky extern global variable and modifies the
test code to properly create QEMU capabilities cache for QEMU
binaries used in our tests.
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

Our test data used a lot of different qemu binary paths and some
of them were based on downstream systems.

Note that there is one file where I had to add "accel=kvm" because
the qemuargv2xml code parses "/usr/bin/kvm" as virt type="kvm".
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>