- 16 5月, 2016 1 次提交
-
-
由 Cole Robinson 提交于
-name guest= is the explicit parameter for passing a VM name. Using it is required to allow a VM with an '=' in the name https://bugzilla.redhat.com/show_bug.cgi?id=1276485
-
- 04 5月, 2016 1 次提交
-
-
由 John Ferlan 提交于
An iothread for virtio-scsi is a property of the controller. Add a lookup of the 'virtio-scsi-pci' and 'virtio-scsi-ccw' device properties and parse the output. For both, support for the iothread was added in qemu 2.4 while support for virtio-scsi in general was added in qemu 1.4. Modify the various mock capabilities replies (by hand) to reflect the when virtio-scsi was supported and then specifically when the iothread property was added. For versions prior to 1.4, use the no device error return for virtio-scsi. For versions 1.4 to before 2.4, add some data for virtio-scsi-pci even though it isn't complete we're not looking for anything specific there anyway. For 2.4 to 2.6, add a more complete reply. Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
-
- 03 5月, 2016 1 次提交
-
-
由 Cole Robinson 提交于
Reports whether we support -device nec-usb-xhci,p3=XXX value, which has been available since qemu 1.3.0
-
- 02 5月, 2016 1 次提交
-
-
由 Peter Krempa 提交于
If qemu doesn't support DEVICE_TRAY_MOVED event the code that attempts to change media would attempt to re-eject the tray even if it wouldn't be notified when the tray opened. Add a capability bit and skip retrying for old qemus.
-
- 15 4月, 2016 3 次提交
-
-
由 Peter Krempa 提交于
The flag is now unused and all qemus supported by libvirt already support it.
-
由 Laine Stump 提交于
The pxb device is a PCIe expander bus that can be added to any Q35-based machinetype. A single PCIe port (*not* hotpluggable) is provided; if more than one device is desired, or if hotplug support is needed, either a pcie-root-port, or some combination of pcie-switch-upstream-port and pcie-swith-downstream-ports must be added to it. It can have a NUMA node number associated with it, as well as a bus number.
-
由 Laine Stump 提交于
The pxb device is a PCI expander bus that can be added to any 440fx-based machinetype. The PCI bus that is created has 32 standard PCI slots (hotpluggable). It can have a NUMA node number associated with it, as well as a bus number.
-
- 07 4月, 2016 1 次提交
-
-
由 John Ferlan 提交于
Add a capability bit for the qemu secret object. Adjust the 2.6.0-1 caps/replies to add the secret object. For the .replies it's take from the '{"execute":"qom-list-types"}' output.
-
- 12 3月, 2016 1 次提交
-
-
由 John Ferlan 提交于
Add new function to manage adding the serial device options to the command line removing that task from the mainline qemuBuildCommandLine. Using const virDomainDef causes collateral damage in other called APIs which need to make the similar adjustment Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
-
- 11 3月, 2016 1 次提交
-
-
由 Marc-André Lureau 提交于
QEMU (somewhere around 2.0) added a new sub-option to the -name flag -name debug-threads=on. Signed-off-by: NMarc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
-
- 10 3月, 2016 1 次提交
-
-
由 Daniel P. Berrange 提交于
Honour the <log file='...'/> element in chardevs to output data to a file. This requires QEMU >= 2.6 Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
- 01 3月, 2016 2 次提交
-
-
由 Pavel Hrdina 提交于
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>
-
由 Marc-André Lureau 提交于
Add Spice graphics gl attribute. qemu 2.6 should have -spice gl=on argument to enable opengl rendering context (patches on the ML). This is necessary to actually enable virgl rendering. Add a qemuxml2argv test for virtio-gpu + spice with virgl. Signed-off-by: NMarc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
- 22 2月, 2016 1 次提交
-
-
由 Paolo Bonzini 提交于
This does nothing more than adding the new device and capability. The device is present since QEMU 2.6.0. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
- 12 1月, 2016 2 次提交
-
-
由 Dmitry Andreev 提交于
Add appropriate capability check and new virQEMUCaps flag for the new virtio balloon feature. QEMU commit with the complete feature description: http://git.qemu.org/?p=qemu.git;a=commit;h=e3816255bf4b6377bb405331e2ee0dc14d841b80
-
由 Michal Privoznik 提交于
This capability tells if qemu is capable of vserport_change events. Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
- 11 1月, 2016 2 次提交
-
-
由 Cole Robinson 提交于
Update test data to match
-
由 Cole Robinson 提交于
These settings are specific to PIIX, so clarify it
-
- 24 12月, 2015 1 次提交
-
-
由 Dmitry Mishin 提交于
By default, QEMU truncates serial file on open. Sometimes, it could be weird - for example, when we are trying to investigate some event, which occured several restarts ago. This patch adds an ability to preserve previous content. Signed-off-by: NDmitry Mishin <dim@virtuozzo.com>
-
- 30 11月, 2015 2 次提交
-
-
由 Ján Tomko 提交于
Add QEMU_CAPS_VIRTIO_INPUT_HOST for both virtio-input-host-device and virtio-input-host-pci.
-
由 Ján Tomko 提交于
Add capabilities for virtio-keyboard, virtio-mouse and virtio-tablet devices: name "virtio-keyboard-device", bus virtio-bus name "virtio-keyboard-pci", bus PCI name "virtio-mouse-device", bus virtio-bus name "virtio-mouse-pci", bus PCI name "virtio-tablet-device", bus virtio-bus name "virtio-tablet-pci", bus PCI Map both -device and -pci versions of the device to one capability. https://bugzilla.redhat.com/show_bug.cgi?id=1231114
-
- 27 11月, 2015 2 次提交
-
-
由 Marc-André Lureau 提交于
Check if virtio-gpu provides virgl option, and add qemu command line formatter. It is enabled with the existing accel3d attribute: <model type='virtio' heads='1'> <acceleration accel3d='yes'/> </model> Signed-off-by: NMarc-André Lureau <marcandre.lureau@gmail.com> Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
由 Marc-André Lureau 提交于
qemu 2.5 provides virtio video device. It can be used with -device virtio-vga for primary devices, or -device virtio-gpu for non-vga devices. However, only the primary device (VGA) is supported with this patch. Reference: https://bugzilla.redhat.com/show_bug.cgi?id=1195176Signed-off-by: NMarc-André Lureau <marcandre.lureau@gmail.com> Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
- 19 11月, 2015 1 次提交
-
-
由 Jiri Denemark 提交于
Traditionally, we pass incoming migration URI on QEMU command line, which has some drawbacks. Depending on the URI QEMU may initialize its migration state immediately without giving us a chance to set any additional migration parameters (this applies mainly for fd: URIs). For some URIs the monitor may be completely blocked from the beginning until migration is finished, which means we may be stuck in qmp_capabilities command without being able to send any QMP commands. QEMU solved this by introducing "defer" parameter for -incoming command line option. This will tell QEMU to prepare for an incoming migration while the actual incoming URI is sent using migrate-incoming QMP command. Before calling this command we can normally talk to the monitor and even set any migration parameters which will be honored by the incoming migration. Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
-
- 10 11月, 2015 14 次提交
-
-
由 Daniel P. Berrange 提交于
The -sdl and -net ...name=XXX arguments were both introduced in QEMU 0.10, so the QEMU driver can assume they are always available. Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
由 Daniel P. Berrange 提交于
As of QEMU 0.10.0 the -vga argument was introduced, so the QEMU driver can assume it is always available. Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
由 Daniel P. Berrange 提交于
As of QEMU 0.10.0 the -drive format= parameter was added, so the QEMU driver can assume it is always available. Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
由 Daniel P. Berrange 提交于
As of QEMU 0.10.0, the -drive cache option stopped using the on/off value names, so the QEMU driver can assume use of the new value names. Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
由 Daniel P. Berrange 提交于
Since we require QEMU 0.12.0, we can assume that QEMU supports all of the fd, tcp, unix and exec migration protocols. Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
由 Daniel P. Berrange 提交于
-
由 Daniel P. Berrange 提交于
We have twice previously attempted to remove Xenner support commit de9be0ab Author: Daniel P. Berrange <berrange@redhat.com> Date: Wed Aug 22 17:29:01 2012 +0100 Remove xenner support commit 92572c3d Author: Ján Tomko <jtomko@redhat.com> Date: Wed Feb 18 16:33:50 2015 +0100 Remove code handling the QEMU_CAPS_DOMID capability This change really does remove the last traces of it in the capabilities handling code Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
由 Daniel P. Berrange 提交于
The -uuid arg was added in QEMU 0.10.0, so the QEMU driver can assume it is always available. Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
由 Daniel P. Berrange 提交于
The -name arg was added in QEMU 0.9.1, so the QEMU driver can assume it is always available. Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
由 Daniel P. Berrange 提交于
As of QEMU 0.9.1 the -drive argument can be used to configure all disks, so the QEMU driver can assume it is always available and drop support for -hda/-cdrom/etc. Many of the tests need updating because a great many were running without CAPS_DRIVE set, so using the -hda legacy syntax. Fixing the tests uncovered a bug in the argv -> xml convertor which failed to handle disk with if=floppy. Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
由 Daniel P. Berrange 提交于
The -no-reboot arg was added in QEMU 0.9.0, so the QEMU driver can now assume it is always present. Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
由 Daniel P. Berrange 提交于
As of QEMU 0.11.0 the 'info chardev' monitor command can be used to report on allocated chardev paths, so we can drop support for parsing QEMU stderr to locate the PTY paths. Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
由 Daniel P. Berrange 提交于
As of QEMU 0.9.0 the -vnc option accepts a ':' to separate port from listen address, so the QEMU driver can assume that support for listen addresses is always available. Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
由 Daniel P. Berrange 提交于
The kQEMU accelerator was deleted in QEMU 0.12, so we no longer need to support it in the QEMU driver. Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
- 07 10月, 2015 2 次提交
-
-
由 Andrea Bolognani 提交于
Two #define lines introduced by b527aa09 did not respect the indentation rules, thus breaking syntax-check.
-
由 Andrea Bolognani 提交于
This gets rid of the partially enforced alignment and makes it less likely for a bogus value to be introduced in the enumeration. Capabilities are divided in five-element groups for better readability. Use #define for QEMU_CAPS_NET_NAME and QEMU_CAPS_HOST_NET_ADD, both of which are aliases for QEMU_CAPS_0_10.
-