- 21 8月, 2012 1 次提交
-
-
由 Peter Krempa 提交于
This patch adds helper functions that enable us to use libssh2 in conjunction with libvirt's virNetSockets for ssh transport instead of spawning "ssh" client process. This implemetation supports tunneled plaintext, keyboard-interactive, private key, ssh agent based and null authentication. Libvirt's Auth callback is used for interaction with the user. (Keyboard interactive authentication, adding of host keys, private key passphrases). This enables seamless integration into the application using libvirt. No helpers as "ssh-askpass" are needed. Reading and writing of OpenSSH style "known_hosts" files is supported. Communication is done using SSH exec channel, where the user may specify arbitrary command to be executed on the remote side and reads and writes to/from stdin/out are sent through the ssh channel. Usage of stderr is not (yet) supported.
-
- 18 8月, 2012 1 次提交
-
-
由 Shradha Shah 提交于
Move the functions the parse/format, and validate PCI addresses to their own file so they can be conveniently used in other places besides device_conf.c Refactoring existing code without causing any functional changes to prepare for new code. This patch makes the code reusable. Signed-off-by: NShradha Shah <sshah@solarflare.com>
-
- 16 8月, 2012 1 次提交
-
-
由 Laine Stump 提交于
The following config elements now support a <vlan> subelements: within a domain: <interface>, and the <actual> subelement of <interface> within a network: the toplevel, as well as any <portgroup> Each vlan element must have one or more <tag id='n'/> subelements. If there is more than one tag, it is assumed that vlan trunking is being requested. If trunking is required with only a single tag, the attribute "trunk='yes'" should be added to the toplevel <vlan> element. Some examples: <interface type='hostdev'/> <vlan> <tag id='42'/> </vlan> <mac address='52:54:00:12:34:56'/> ... </interface> <network> <name>vlan-net</name> <vlan trunk='yes'> <tag id='30'/> </vlan> <virtualport type='openvswitch'/> </network> <interface type='network'/> <source network='vlan-net'/> ... </interface> <network> <name>trunk-vlan</name> <vlan> <tag id='42'/> <tag id='43'/> </vlan> ... </network> <network> <name>multi</name> ... <portgroup name='production'/> <vlan> <tag id='42'/> </vlan> </portgroup> <portgroup name='test'/> <vlan> <tag id='666'/> </vlan> </portgroup> </network> <interface type='network'/> <source network='multi' portgroup='test'/> ... </interface> IMPORTANT NOTE: As of this patch there is no backend support for the vlan element for *any* network device type. When support is added in later patches, it will only be for those select network types that support setting up a vlan on the host side, without the guest's involvement. (For example, it will be possible to configure a vlan for a guest connected to an openvswitch bridge, but it won't be possible to do that for one that is connected to a standard Linux host bridge.)
-
- 10 8月, 2012 1 次提交
-
-
由 Matthias Bolte 提交于
An ESX server has one or more PhysicalNics that represent the actual hardware NICs. Those can be listed via the interface driver. A libvirt virtual network is mapped to a HostVirtualSwitch. On the physical side a HostVirtualSwitch can be connected to PhysicalNics. On the virtual side a HostVirtualSwitch has HostPortGroups that are mapped to libvirt virtual network's portgroups. Typically there is HostPortGroups named 'VM Network' that is used to connect virtual machines to a HostVirtualSwitch. A second HostPortGroup typically named 'Management Network' is used to connect the hypervisor itself to the HostVirtualSwitch. This one is not mapped to a libvirt virtual network's portgroup. There can be more HostPortGroups than those typical two on a HostVirtualSwitch. +---------------+-------------------+ ...---| | | +-------------+ | HostPortGroup | |---| PhysicalNic | | VM Network | | | vmnic0 | ...---| | | +-------------+ +---------------+ HostVirtualSwitch | | vSwitch0 | +---------------+ | | HostPortGroup | | ...---| Management | | | Network | | +---------------+-------------------+ The virtual counterparts of the PhysicalNic is the HostVirtualNic for the hypervisor and the VirtualEthernetCard for the virtual machines that are grouped into HostPortGroups. +---------------------+ +---------------+---... | VirtualEthernetCard |---| | +---------------------+ | HostPortGroup | +---------------------+ | VM Network | | VirtualEthernetCard |---| | +---------------------+ +---------------+ | +---------------+ +---------------------+ | HostPortGroup | | HostVirtualNic |---| Management | +---------------------+ | Network | +---------------+---... The currently implemented network driver can list, define and undefine HostVirtualSwitches including HostPortGroups for virtual machines. Existing HostVirtualSwitches cannot be edited yet. This will be added in a followup patch.
-
- 01 8月, 2012 3 次提交
-
-
由 Dmitry Guryanov 提交于
Parallels Cloud Server has one serious discrepancy with libvirt: libvirt stores domain configuration files in one place, and storage files in other places (with the API of storage pools and storage volumes). Parallels Cloud Server stores all domain data in a single directory, for example, you may have domain with name fedora-15, which will be located in '/var/parallels/fedora-15.pvm', and it's hard disk image will be in '/var/parallels/fedora-15.pvm/harddisk1.hdd'. I've decided to create storage driver, which produces pseudo-volumes (xml files with volume description), and they will be 'converted' to real disk images after attaching to a VM. So if someone creates VM with one hard disk using virt-manager, at first virt-manager creates a new volume, and then defines a domain. We can lookup a volume by path in XML domain definition and find out location of new domain and size of its hard disk. Signed-off-by: NDmitry Guryanov <dguryanov@parallels.com>
-
由 Dmitry Guryanov 提交于
Parallels driver is 'stateless', like vmware or openvz drivers. It collects information about domains during startup using command-line utility prlctl. VMs in Parallels are identified by UUIDs or unique names, which can be used as respective fields in virDomainDef structure. Currently only basic info, like description, virtual cpus number and memory amount, is implemented. Querying devices information will be added in the next patches. Parallels doesn't support non-persistent domains - you can't run a domain having only disk image, it must always be registered in system. Functions for querying domain info have been just copied from test driver with some changes - they extract needed data from previously created list of virDomainObj objects. Signed-off-by: NDmitry Guryanov <dguryanov@parallels.com>
-
由 Dmitry Guryanov 提交于
Parallels Cloud Server is a cloud-ready virtualization solution that allows users to simultaneously run multiple virtual machines and containers on the same physical server. More information can be found here: http://www.parallels.com/products/pcs/ Also beta version of Parallels Cloud Server can be downloaded there. Signed-off-by: NDmitry Guryanov <dguryanov@parallels.com>
-
- 30 7月, 2012 1 次提交
-
-
由 Daniel P. Berrange 提交于
Move the code that handles the LXC monitor out of the lxc_process.c file and into lxc_monitor.{c,h} Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
- 26 7月, 2012 11 次提交
-
-
由 Osier Yang 提交于
Commands in node device group moved from virsh.c to virsh-nodedev.c, * virsh.c: Remove commands in node device group. * virsh-nodedev.c: New file, filled with commands in node device group * po/POTFILES.in: Add virsh-nodedev.c * cfg.mk: Skip to check config.h including for virsh-nodedev.c
-
由 Osier Yang 提交于
Commands in host group moved from virsh.c to virsh-host.c, * virsh.c: Remove commands in host group. * virsh-host.c: New file, filled with commands in host group * po/POTFILES.in: Add virsh-host.c * cfg.mk: Skip to check config.h including for virsh-host.c
-
由 Osier Yang 提交于
Commands to manage domain snapshot are moved from virsh.c to virsh-snapshot.c. * virsh.c: Remove domain snapshot commands. * virsh-snapshot.c: New file, filled with domain snapshot commands. * po/POTFILES.in: Add virsh-snapshot.c * cfg.mk: Skip strcase and config.h including checking for virsh-snapshot.c
-
由 Osier Yang 提交于
Commands to manage secret are moved from virsh.c to virsh-secret.c, with a few helpers for secret command use. * virsh.c: Remove secret commands and a few helpers. (vshCommandOptSecret, and vshCommandOptSecretBy) * virsh-secret.c: New file, filled with secret commands and its helpers. * po/POTFILES.in: Add virsh-secret.c * cfg.mk: Skip to check config.h including for virsh-secret.c
-
由 Osier Yang 提交于
Commands to manage network filter are moved from virsh.c to virsh-nwfilter.c, with a few helpers for network filter command use. * virsh.c: Remove network filter commands and a few helpers. (vshCommandOptNWFilter, and vshCommandOptNWFilterBy) * virsh-nwfilter.c: New file, filled with network filter commands and its helpers. * po/POTFILES.in: Add virsh-nwfilter.c * cfg.mk: Skip to check config.h including for virsh-nwfilter.c
-
由 Osier Yang 提交于
Commands to manage host interface are moved from virsh.c to virsh-interface.c, with a few helpers for interface command use. * virsh.c: Remove interface commands and a few helpers. (vshCommandOptInterface, vshCommandOptInterfaceBy) * virsh-interface.c: New file, filled with interface commands and its helpers. * cfg.mk: Skip to check config.h including for virsh-interface.c * po/POTFILES.in: Add virsh-interface.c
-
由 Osier Yang 提交于
Commands to manage network are moved from virsh.c to virsh-network.c, with a few helpers for network command use. * virsh.c: Remove network commands and a few helpers. * virsh-network.c: New file, filled with network commands and its helpers. * po/POTFILES.in: Add virsh-network.c * cfg.mk: Skip to check config.h including for virsh-network.c
-
由 Osier Yang 提交于
This splits commands of storage pool group into virsh-pool.c, The helpers not for common use are moved too. Standard copyright is added for the new file. * tools/virsh.c: Remove commands for storage storage pool and a few helpers. (vshCommandOptVol, vshCommandOptVolBy). * tools/virsh-pool.c: New file, filled with commands of storage pool group and its helpers. * po/POTFILES.in: Add virsh-pool.c * cfg.mk: Skip to check config.h including for virsh-pool.c
-
由 Osier Yang 提交于
This splits commands of storage volume group into virsh-volume.c, The helpers not for common use are moved too. Standard copyright is added for the new file. * tools/virsh.c: Remove commands for storage storage volume and a few helpers. (vshCommandOptVol, vshCommandOptVolBy). * tools/virsh-volume.c: New file, filled with commands of storage volume group and its helpers. * po/POTFILES.in: Add virsh-volume.c * cfg.mk: Skip to check config.h including for virsh-volume.c
-
由 Osier Yang 提交于
This splits commands to manage domain into virsh-domain.c,The helpers not for common use are moved into them too. Standard copyright is added for the new file. * tools/virsh.c: - Remove commands for domain group, and one helper (vshDomainVcpuStateToString) - vshStreamSink is moved before commands's definition for it's also used by commands not of domain group, such as volUpload. * tools/virsh-domain.c: - New file, commands for domain group and the one helper are moved into it. * po/POTFILES.in: - Add virsh-domain.c * cfg.mk: - Skip to check config.h including for virsh-domain.c
-
由 Osier Yang 提交于
This splits commands commands to monitor domain status into virsh-domain-monitor.c. The helpers not for common use are moved too. Standard copyright is added. * tools/virsh.c: - Remove commands for domain monitoring group and a few helpers ( vshDomainIOErrorToString, vshGetDomainDescription, vshDomainControlStateToString, vshDomainStateToString) not for common use. - Remove (incldue "intprops.h"). * tools/virsh-domain-monitor.c: - New file, filled with commands of domain monitor group. - Add "intprops.h". * cfg.mk: - Skip strcase checking for virsh-domain-monitor.c - Skip to check config.h including for virsh-domain-monitor.c * po/POTFILES.in - Add virsh-domain-monitor.c
-
- 19 7月, 2012 3 次提交
-
-
由 Daniel P. Berrange 提交于
Move all the code that manages stop/start of LXC processes into separate lxc_process.{c,h} file to make the lxc_driver.c file smaller Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
由 Daniel P. Berrange 提交于
Move the cgroup setup code out of the lxc_controller.c file and into lxc_cgroup.{c,h}. This reduces the size of the lxc_controller.c file and paves the way to invoke cgroup setup from lxc_driver.c instead of lxc_controller.c in the future Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
由 Sebastian Wiedenroth 提交于
This patch brings support to manage sheepdog pools and volumes to libvirt. It uses the "collie" command-line utility that comes with sheepdog for that. A sheepdog pool in libvirt maps to a sheepdog cluster. It needs a host and port to connect to, which in most cases is just going to be the default of localhost on port 7000. A sheepdog volume in libvirt maps to a sheepdog vdi. To create one specify the pool, a name and the capacity. Volumes can also be resized later. In the volume XML the vdi name has to be put into the <target><path>. To use the volume as a disk source for virtual machines specify the vdi name as "name" attribute of the <source>. The host and port information from the pool are specified inside the host tag. <disk type='network'> ... <source protocol="sheepdog" name="vdi_name"> <host name="localhost" port="7000"/> </source> </disk> To work right this patch parses the output of collie, so it relies on the raw output option. There recently was a bug which caused size information to be reported wrong. This is fixed upstream already and will be in the next release. Signed-off-by: NSebastian Wiedenroth <wiedi@frubar.net>
-
- 18 7月, 2012 1 次提交
-
-
由 Daniel P. Berrange 提交于
The virnetdevtap.c and viruri.c files had two error report messages which were not annotated with _(...) Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
- 02 7月, 2012 1 次提交
-
-
由 Daniel Veillard 提交于
* configure.ac docs/news.html.in libvirt.spec.in: new version and documentation update * po/*.po*: updated and regenerated localizations
-
- 02 6月, 2012 2 次提交
-
-
由 Michal Privoznik 提交于
Currently, we either generate some cmd*Edit commands (cmdPoolEdit and cmdNetworkEdit) via sed script or copy the body of cmdEdit (e.g. cmdInterfaceEdit, cmdNWFilterEdit, etc.). This fact makes it harder to implement any new feature to our editing system. Therefore switch to new implementation - define macros to: - dump XML (EDIT_GET_XML) - take an action if XML wasn't changed, usually just vshPrint() (EDIT_NOT_CHANGED) - define new object (EDIT_DEFINE) - the edited XML is in @doc_edited - free object defined by EDIT_DEFINE (EDIT_FREE) and #include "virsh-edit.c"
-
由 Stefan Berger 提交于
This patch adds DHCP snooping support to libvirt. The learning method for IP addresses is specified by setting the "CTRL_IP_LEARNING" variable to one of "any" [default] (existing IP learning code), "none" (static only addresses) or "dhcp" (DHCP snooping). Active leases are saved in a lease file and reloaded on restart or HUP. The following interface XML activates and uses the DHCP snooping: <interface type='bridge'> <source bridge='virbr0'/> <filterref filter='clean-traffic'> <parameter name='CTRL_IP_LEARNING' value='dhcp'/> </filterref> </interface> All filters containing the variable 'IP' are automatically adjusted when the VM receives an IP address via DHCP. However, multiple IP addresses per interface are silently ignored in this patch, thus only supporting one IP address per interface. Multiple IP address support is added in a later patch in this series. Signed-off-by: NDavid L Stevens <dlstevens@us.ibm.com> Signed-off-by: NStefan Berger <stefanb@linux.vnet.ibm.com>
-
- 28 5月, 2012 1 次提交
-
-
由 Daniel P. Berrange 提交于
To ensure consistent error reporting of invalid arguments, provide a number of predefined helper methods & macros. - An arg which must not be NULL: virCheckNonNullArgReturn(argname, retvalue) virCheckNonNullArgGoto(argname, label) - An arg which must be NULL virCheckNullArgGoto(argname, label) - An arg which must be positive (ie 1 or greater) virCheckPositiveArgGoto(argname, label) - An arg which must not be 0 virCheckNonZeroArgGoto(argname, label) - An arg which must be zero virCheckZeroArgGoto(argname, label) - An arg which must not be negative (ie 0 or greater) virCheckNonNegativeArgGoto(argname, label) * src/libvirt.c, src/libvirt-qemu.c, src/nodeinfo.c, src/datatypes.c: Update to use virCheckXXXX macros * po/POTFILES.in: Add libvirt-qemu.c and virterror_internal.h * src/internal.h: Define macros for checking invalid args * src/util/virterror_internal.h: Define macros for reporting invalid args Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
- 22 5月, 2012 1 次提交
-
-
由 Wido den Hollander 提交于
This patch adds support for a new storage backend with RBD support. RBD is the RADOS Block Device and is part of the Ceph distributed storage system. It comes in two flavours: Qemu-RBD and Kernel RBD, this storage backend only supports Qemu-RBD, thus limiting the use of this storage driver to Qemu only. To function this backend relies on librbd and librados being present on the local system. The backend also supports Cephx authentication for safe authentication with the Ceph cluster. For storing credentials it uses the built-in secret mechanism of libvirt. Signed-off-by: NWido den Hollander <wido@widodh.nl>
-
- 15 5月, 2012 1 次提交
-
-
由 Daniel P. Berrange 提交于
-
- 14 5月, 2012 1 次提交
-
-
由 Daniel Veillard 提交于
* configure.ac docs/news.html.in libvirt.spec.in: updates for the release * po/*.po: pushed new sources and synchronized new languages translations
-
- 20 4月, 2012 1 次提交
-
-
由 Daniel P. Berrange 提交于
DBus connection. The HAL device code further requires that the DBus connection is integrated with the event loop and provides such glue logic itself. The forthcoming FirewallD integration also requires a dbus connection with event loop integration. Thus we need to pull the current event loop glue out of the HAL driver. Thus we create src/util/virdbus.{c,h} files. This contains just one method virDBusGetSystemBus() which obtains a handle to the single shared system bus instance, with event glue automagically setup.
-
- 10 4月, 2012 1 次提交
-
-
由 Jiri Denemark 提交于
-
- 04 4月, 2012 1 次提交
-
-
由 Daniel P. Berrange 提交于
-
- 03 4月, 2012 1 次提交
-
-
由 Daniel Veillard 提交于
* configure.ac docs/news.html.in libvirt.spec.in: update for the release * po/*.po*: updated a number of languages translation including new indian languages and regenerated
-
- 23 3月, 2012 3 次提交
-
-
由 Daniel P. Berrange 提交于
* src/util/virauth.c, src/util/virauth.h: Add virAuthGetConfigFilePath * include/libvirt/virterror.h, src/util/virterror.c: Add VIR_FROM_AUTH error domain Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
由 Daniel P. Berrange 提交于
To follow latest naming conventions, rename src/util/authhelper.[ch] to src/util/virauth.[ch]. * src/util/authhelper.[ch]: Rename to src/util/virauth.[ch] * src/esx/esx_driver.c, src/hyperv/hyperv_driver.c, src/phyp/phyp_driver.c, src/xenapi/xenapi_driver.c: Update for renamed include files Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
由 Daniel P. Berrange 提交于
The '.ini' file format is a useful alternative to the existing config file style, when you need to have config files which are hashes of hashes. The 'virKeyFilePtr' object provides a way to parse these file types. * src/Makefile.am, src/util/virkeyfile.c, src/util/virkeyfile.h: Add .ini file parser * tests/Makefile.am, tests/virkeyfiletest.c: Test basic parsing capabilities Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
- 27 2月, 2012 1 次提交
-
-
由 Peter Krempa 提交于
This patch adds a set of functions used in creating console streams for domains using PTYs and ensures mutually exclusive access to the PTYs. If mutually exclusive access is not used, two clients may open the same console, which results in corruption on both clients as both of them race to read data from the PTY. Two approaches are used to ensure this: 1) Internal data structure holding open PTYs. This is used internally and enables the user to forcibly terminate another console connection eg. when somebody leaves the console open on another host. 2) UUCP style lock files: This uses UUCP lock files according to the FHS ( http://www.pathname.com/fhs/pub/fhs-2.3.html#VARLOCKLOCKFILES ) to check if other programs (like minicom) are not using the pty device of the console. This feature is disabled by default and may be enabled using configure parameter --with-console-lock-files=/path/to/lock/file/directory or --with-console-lock-files=auto (which tries to infer the location from OS used (currently only linux). On usual linux systems, normal users may not write to the /var/lock directory containing the locks. This poses problems while in session mode. If the current user has no access to the lockfile directory, check for presence of the file is still done, but no lock file is created. This does NOT result in an error.
-
- 16 2月, 2012 1 次提交
-
-
由 Ansis Atteka 提交于
This patch allows libvirt to add interfaces to already existing Open vSwitch bridges. The following syntax in domain XML file can be used: <interface type='bridge'> <mac address='52:54:00:d0:3f:f2'/> <source bridge='ovsbr'/> <virtualport type='openvswitch'> <parameters interfaceid='921a80cd-e6de-5a2e-db9c-ab27f15a6e1d'/> </virtualport> <address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x0'/> </interface> or if libvirt should auto-generate the interfaceid use following syntax: <interface type='bridge'> <mac address='52:54:00:d0:3f:f2'/> <source bridge='ovsbr'/> <virtualport type='openvswitch'> </virtualport> <address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x0'/> </interface> It is also possible to pass an optional profileid. To do that use following syntax: <interface type='bridge'> <source bridge='ovsbr'/> <mac address='00:55:1a:65:a2:8d'/> <virtualport type='openvswitch'> <parameters interfaceid='921a80cd-e6de-5a2e-db9c-ab27f15a6e1d' profileid='test-profile'/> </virtualport> </interface> To create Open vSwitch bridge install Open vSwitch and run the following command: ovs-vsctl add-br ovsbr
-
- 13 2月, 2012 1 次提交
-
-
由 Daniel Veillard 提交于
* configure.ac docs/news.html.in libvirt.spec.in: updated for the release * po/*.po*: update ja, it and uk localization, fixed the ja one
-