Defines the extensions to the remote protocol for generic
data streams. Adds a bunch of helper code to the libvirtd
daemon for working with data streams.

* daemon/Makefile.am: Add stream.c/stream.h to build
* daemon/stream.c, qemud/stream.h: Generic helper functions for
  creating new streams, associating streams with clients, finding
  existing streams for a client and removing/deleting streams.
* src/remote/remote_protocol.x: Add a new 'REMOTE_STREAM' constant
  for the 'enum remote_message_type' for encoding stream data
  in wire messages. Add a new 'REMOTE_CONTINUE' constant to
  'enum remote_message_status' to indicate further data stream
  messsages are expected to follow.  Document how the
  remote_message_header is used to encode data streams
* src/remote/remote_protocol.h: Regenerate
* daemon/dispatch.c: Remove assumption that a error message
  sent to client is always type=REMOTE_REPLY. It may now
  also be type=REMOTE_STREAM. Add convenient method for
  sending outgoing stream data packets. Log and ignore
  non-filtered incoming stream packets. Add a method for
  serializing a stream error message
* daemon/dispatch.h:  Add API for serializing stream errors
  and sending stream data packets
* daemon/qemud.h: Add struct qemud_client_stream for tracking
  active data streams for clients. Tweak filter function
  operation so that it accepts a client object too.
* daemon/qemud.c: Refactor code for free'ing message objects
  which have been fully transmitted into separate method.
  Release all active streams when client shuts down. Change
  filter function to be responsible for queueing the message

* qemud/: Rename to daemon/
* Makefile.am, configure.in, src/Makefile.am, src/remote_internal.c,
  tests/Makefile.am, tests/eventtest.c: s/qemud/daemon/ where needed

The 'remote_message_header' struct has a mis-leadingly named
field 'direction'. It is really a reflection of the type of
message, and some types can be sent in either direction. Thus
the field is more accurately named 'type'. No function change.

* qemud/remote_protocol.x: Rename 'direction' to 'type' in
  'remote_message_header. Write better docs describing the
  message header field semantics & usage
* qemud/remote_protocol.c, qemud/remote_protocol.h: Regenerate
* qemud/remote.c, qemud/dispatch.c, src/remote_internal.c
  Update to reflect rename of 'direction' to 'type'

The remoteDispatchClientRequest() method is currently hardwired to
assume there is only one type of incoming message, a method call.
To allow for alternate types of incoming messags, the code that is
specific to method calls is being split into a separate method
remoteDispatchClientCall

* qemud/dispatch.c: Move method call specific code out into
  remoteDispatchClientCall. Add a helper remoteSerializeError
  for returning error messages to client

The current qemudRegisterClientEvent() code is used both for
registering the initial socket watch, and updating the already
registered watch. This causes unneccessary complexity in alot
of code which only cares about updating existing watches. The
updating of a watch cannot ever fail, nor is a reference to the
'qemud_server' object required.

This introduces a new qemudUpdateClientEvent() method for that
case, allowing the elimination of unneccessary error checking
and removal of the server back-reference in struct qemud_client.

* qemud/qemud.h: Remove 'server' field from struct qemud_client.
  Add qemudUpdateClientEvent() method. Remove 'update' param
  from qemudRegisterClientEvent method
* qemud/dispatch.c, qemud/qemud.c, qemud/remote.c: Update alot
  of code to use qemudUpdateClientEvent() instead of
  qemudRegisterClientEvent(). Move more logic from remoteRelayDomainEvent
  into remoteDispatchDomainEventSend.

This removes an assumption from qemudWorker() code that every
incoming message will generate a reply.

* qemud/dispatch.c: remoteDispatchClientRequest now has responsibility
  for queuing the reply message to the RPC call
* qemud/qemud.c: Do not queue the RPC call reply in qemudWorker(),
  allowing remoteDispatchClientRequest() to take care of it

Introduces an API for encoding the header field for outgoing messages
allowing some duplicated code to be eliminated

* qemud/dispatch.c, qemud/dispatch.h: add remoteEncodeClientMessageHeader
  for encoding message header. Update remoteDispatchClientRequest to
  use this method.
* qemud/remote.c: Update remoteDispatchDomainEventSend to use the
  generic remoteEncodeClientMessageHeader() for encoding event
  message hedaders. Push some logic from remoteRelayDomainEvent
  down into remoteDispatchDomainEventSend.

Separate the decoding of incoming request header out from the
dispatch code. This will allow later code to making dispatcher
routing decisions based on the header field data.

* qemud/dispatch.c, qemud/dispatch.h: Add remoteDecodeClientMessageHeader
  API for decoding the header of a client message. Update the
  remoteDispatchClientRequest method to assume a pre-decoded
  header.
* qemud/qemud.h: Include a 'remote_message_header' field in
  'struct qemud_client_message' for pre-decoded header data
* qemud/qemud.c: Decode the incoming client message header before
  invoking remoteDispatchClientRequest

* po/POTFILES.in: Add qemud/dispatch.c
* qemud/dispatch.c, qemud/dispatch.h: Generic code handling dispatch of
  RPC messages.
* qemud/Makefile.am: Add dispatch.c to build
* qemud/qemud.c: Include dispatch.h
* qemud/qemud.h: Remove remoteDispatchClientRequest, remoteRelayDomainEvent
  now in dispatch.h
* qemud/remote.c: Remove remoteDispatchClientRequest, remoteRelayDomainEvent
  now in dispatch.c, and dispatch_args, dispatch_ret, dispatch_fn & dispatch_data
  now in remote.h
* qemud/remote.h: Add typedefs for dispatch_args, dispatch_ret,
  dispatch_fn, dispath_data. Add remoteGetDispatchData() API

	* qemud/Makefile.am, qemud/dispatch.c, qemud/dispatch.h,
	  qemud/internal.h, qemud/protocol.c,
	  qemud/protocol.h, qemud/protocol.x, qemud/qemud.c:
	  libvirt_qemud server-side modifications to use
	  XDR-based protocol instead of homebrew (Dan Berrange).
	  QEMUD server modified to dispatch calls from remote
	  clients (Richard Jones).  Added TLS support (Richard Jones).
	  Added TCP & IPv6 support (Richard Jones).
	  Additional configuration file, command-line handling, and
	  usage (Richard Jones).
	* qemud/conf.c: Remove unnecessary header file.

  proxy/libvirt_proxy.c qemud/Makefile.am qemud/conf.c qemud/conf.h
  qemud/dispatch.c qemud/internal.h qemud/protocol.h
  src/driver.h src/internal.h src/libvirt.c src/libvirt_sym.version
  src/proxy_internal.c src/proxy_internal.h src/qemu_internal.c
  src/test.c src/virsh.c src/virterror.c src/xen_internal.c
  src/xen_internal.h src/xend_internal.c src/xm_internal.c
  src/xml.h src/xs_internal.c: applied patch from Richard Jones
  adding virConnectGetCapabilities(), plus various small little
  fixes
* docs/*: fixed the api extractor script and regenerated
Daniel

        * qemud/protocol.h: add the (domain/network)(Get/Set)Autostart
        requests and replies to the protocol.

        * src/qemu_internal.c: hookup the qemu driver autostart
        methods

        * qemud/dispatch.c, qemud/driver.[ch], internal.h: add
        the daemon side, but just set an in-memory autostart
        flag for now.

        * qemud/driver.[ch], qemud/dispatch.c: fix the fact that
        qemudDispatchDomainStart() doesn't report an error if the uuid
        lookup fails and also move the uuid lookup into the driver
        so that it matches the way we do Destroy().

        * qemud/qemud.c, qemud/dispatch.c, qemud/internal.h
        qemud/conf.c, qemud/driver.c, configure.in: add a
        qemudLog() function which uses syslog() if we're in daemon
        mode, doesn't output INFO/DEBUG messages unless the
        verbose flag is set and doesn't output DEBUG messages
        unless compiled with --enable-debug. Also, make a first
        pass through fatal errors and add error messages for them.

	* qemud/conf.[ch], qemud/dispatch.c, qemud/internal.h,
	  qemud/qemud.c, qemud/driver.c: allow re-defining network
	configs; basically copying dan's patch for domains.

        * include/libvirt/libvirt.h.in, src/libvirt.c: add
        virNetworkGetBridgeName() to allow finding out what
        bridge to connect to in order to join a network.

        * src/driver.h: add networkGetBridgeName() to vtable.

        * qemud/protocol.h: add the request and reply to
        the qemud protocol.

        * qemud/dispatch.c, qemud/driver.[ch]: handle them
        here.

        * src/qemu_internal.c: implement GetBridgeName()
        in the qemu driver.

        * src/libvirt_sym.version: add new symbol.

        * qemud/protocol.h: add the protocol for virtual networks

        * qemud/dispatch.c: implement the protocol

        * qemud/driver.[ch]: add stubs for the driver

        * qemud/internal.h: add struct qemud_network

        * src/qemu_internal.c: add a virtual networks driver

        * qemud/conf.c, qemud/dispatch.c, qemud/driver.c,
          qemud/qemud.c: include autoconf's config.h