It was necessary for fallback functions but last one was deleted in
d828b744.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJiri Denemark <jdenemar@redhat.com>

The remaining HMP commands don't require fd passing so we can purge
filedescriptor passing support from qemuMonitorJSONHumanCommandWitFd and
rename it.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJiri Denemark <jdenemar@redhat.com>

The handlers for 'add-fd' and 'remove-fd' are unused now and riddled
with legacy cruft. Purge them.

Last use was removed in f2019083.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJiri Denemark <jdenemar@redhat.com>

The offset is unsigned long long thus 'U' must be used.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

In addition to the data that libvirt needs and extracts internally,
copy and store the whole 'props' JSON sub-object of the data returned by
query-hotpluggable-cpus for future use.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>

It's already dereffed in the initialization and shouldn't be NULL
unless virJSONValueArraySize after a virJSONValueObjectGetArray
could return a NULL data entry.

Found by Coverity
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
ACKed-by: NPeter Krempa <pkrempa@redhat.com>

The 'blockdev-create' starts a job which creates a storage volume using
the given protocol or formats an existing (added) volume with one of the
supported storage formats.

This patch adds the monitor interaction bits.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

This new event is a superset of the BLOCK_JOB* events and also covers
jobs which don't bind to a VM disk.

In this patch the monitor part is implemented.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

This belongs to the new job management API which can manage also
non-block based jobs.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

This belongs to the new job management API which can manage also
non-block based jobs. Since we'll need to be able to attempt to cancel
jobs which potentially were not started (during reconnect) the 'quiet'
flag allows to suppress errors reported.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

This belongs to the new job management API for generic jobs.

The dismiss command is meant to remove a concluded job after we were
able to get the final status.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Allow using the delayed dismiss of the job so that we can reap the state
even if libvirtd was not running when qemu emitted the job completion
event.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Allow using the node name to specify the base and top of the 'commit'
operation, allow specifying explicit job name and add support for
delayed dismiss of the job so that we can reap the state even if
libvirtd was not running when qemu emitted the job completion event.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Allow using the node name to specify the base of the 'stream' operation,
allow specifying explicit job name and add support for delayed dismiss
of the job so that we can reap the state even if libvirtd was not
running when qemu emitted the job completion event.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

The "cpu-add" command is supported in all supported qemu versions and
cpu unplug did not work at all until the new cpu unplug approach (using
device_add/del) was implemented.

Remove the support for falling back to the text monitor.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

The only user is now in qemu_monitor_json.c to re-parse the command line
format into keyvalue pairs for use in QMP command construction.

Move and rename the functions.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>

Unlike the old version (which is now called qemuMonitorGetGuestCPUx86),
this monitor API checks for individual features by their names rather
than processing CPUID bits. Thus we can get the list of enabled and
disabled features for both CPUID and MSR features.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

The function converts a list of QOM properties into a NULL-terminated
array of property names. The new type parameter may be used to limit the
result to properties of a specific type.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

It was never implemented or used for anything else anyway. Mainly
because it uses CPUID features bits. The function is renamed as
qemuMonitorGetGuestCPUx86 to make this explicit.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

The hash table returned by qemuMonitorGetAllBlockJobInfo is organized by
the frontend name (which skipps the 'drive-' prefix). While our code
properly matches the jobs to the disk, qemu needs the full job name
including the 'drive-' prefix to be able to identify jobs.

Fix this by adding an argument to qemuMonitorGetAllBlockJobInfo which
does not modify the job name before filling the hash.

This fixes a regression where users would not be able to cancel/pivot
block jobs after restarting libvirtd while a blockjob is running.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

The upcoming virDomainBackup() API needs to take advantage of the
ability to expose a bitmap as part of nbd-server-add for a pull-mode
backup (this is the recently-added QEMU_CAPS_NBD_BITMAP capability).
Signed-off-by: NEric Blake <eblake@redhat.com>
Acked-by: NPeter Krempa <pkrempa@redhat.com>

The upcoming virDomainBackup() API needs to take advantage of various
qcow2 bitmap manipulations as the basis to virDomainCheckpoints and
incremental backups.  Add four functions to expose
block-dirty-bitmap-{add,enable,disable,merge} (this is the
recently-added QEMU_CAPS_BITMAP_MERGE capability).
Signed-off-by: NEric Blake <eblake@redhat.com>
Acked-by: NPeter Krempa <pkrempa@redhat.com>

Migration always uses a TCP socket for NBD servers, because we don't
support same-host migration. But upcoming pull-mode incremental backup
needs to also support a Unix socket, for retrieving the backup from
the same host. Support this by plumbing virStorageNetHostDef through
the monitor calls, since that is a nice reusable struct that can track
both TCP and Unix sockets.

Update qemumonitorjsontest to verify both forms of the QMP command.
Signed-off-by: NEric Blake <eblake@redhat.com>
Acked-by: NPeter Krempa <pkrempa@redhat.com>

Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Split out the 'shallow' and 'reuse' flags as booleans rather than passing
in flags and constructing them in irrelevant APIs.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Split out the 'shallow' flag as a boolean argument rather than passing
in flags and constructing them in irrelevant APIs.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Qemu added reporting of virtio balloon new statistics stat-htlb-pgalloc and
stat-htlb-pgfail since qemu-3.0 commit b7b12644297. The value of
stat-htlb-pgalloc represents the number of successful hugetlb page allocations
while stat-htlb-pgfail represents the number of failed ones. Add this
statistics reporting to libvirt.

To enable this feature for vm, guest kenel >= 4.17 is required because
the exporting hugetlb page allocation for virtio balloon is introduced
since 6c64fe7f.
Signed-off-by: NHan Han <hhan@redhat.com>
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

So far, this command returns a structure with only one member:
'wakeup-suspend-support'. But that's okay. It's what we are after
anyway.

Based-on-work-of: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Qemu commit 767abe7 ("chardev: forbid 'wait' option with client
sockets") effectively deprecates usage of "wait" with client sockets
starting with qemu 4.0, and earlier versions ignored the value.

Cc: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>
Signed-off-by: NJán Tomko <jtomko@redhat.com>

The structure can only be used for CPUID data now. Adding a type
indicator and moving the data into a union will let us store alternative
data types.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

It's called virCPUx86DataAdd now.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

The following patches introduce CPU features read from MSR in addition
to those queried via CPUID instruction. Let's introduce a container
struct which will be able to describe either feature type.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Standardize on putting the _LAST enum value on the second line
of VIR_ENUM_IMPL invocations. Later patches that add string labels
to VIR_ENUM_IMPL will push most of these to the second line anyways,
so this saves some noise.
Signed-off-by: NCole Robinson <crobinso@redhat.com>

virutil.(c|h) is a very gross collection of random code. Remove the enum
handlers from there so we can limit the scope where virtutil.h is used.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Use virJSONValueToBuffer so that we can append the command terminator
string without copying of the string again. Also avoid a 'strlen' as we
can query the buffer use size.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NLaine Stump <laine@laine.org>

The internal qemu machinery already logs the sent message via the PROBE
point in qemuMonitorSend and the monitor receive function. Those are way
better as they are easy grepable. Remove the additional ones from the
monitor code which just duplicate the sent data.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NLaine Stump <laine@laine.org>

Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

They were added in qemu commit 7572150c189c6553c2448334116ab717680de66d
released in v0.14.0.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

A caller might be interested in differentiating the cause for
error, especially if DeviceNotFound error occurred.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
ACKed-by: NPeter Krempa <pkrempa@redhat.com>