When creating a new disk mirror the new struct is stored in a separate
variable until everything went well. The removed hunk would actually
remove existing mirror information for example when the api would be run
if a mirror still exists.

(cherry picked from commit 02b364e1)

This fixes a regression introduced in commit ff5f30b6.
Signed-off-by: NEric Blake <eblake@redhat.com>

Conflicts:
	src/qemu/qemu_driver.c - no refactoring of commits 7b7bf001, 4f202266

The NWFilter code has as a deadlock race condition between
the virNWFilter{Define,Undefine} APIs and starting of guest
VMs due to mis-matched lock ordering.

In the virNWFilter{Define,Undefine} codepaths the lock ordering
is

  1. nwfilter driver lock
  2. virt driver lock
  3. nwfilter update lock
  4. domain object lock

In the VM guest startup paths the lock ordering is

  1. virt driver lock
  2. domain object lock
  3. nwfilter update lock

As can be seen the domain object and nwfilter update locks are
not acquired in a consistent order.

The fix used is to push the nwfilter update lock upto the top
level resulting in a lock ordering for virNWFilter{Define,Undefine}
of

  1. nwfilter driver lock
  2. nwfilter update lock
  3. virt driver lock
  4. domain object lock

and VM start using

  1. nwfilter update lock
  2. virt driver lock
  3. domain object lock

This has the effect of serializing VM startup once again, even if
no nwfilters are applied to the guest. There is also the possibility
of deadlock due to a call graph loop via virNWFilterInstantiate
and virNWFilterInstantiateFilterLate.

These two problems mean the lock must be turned into a read/write
lock instead of a plain mutex at the same time. The lock is used to
serialize changes to the "driver->nwfilters" hash, so the write lock
only needs to be held by the define/undefine methods. All other
methods can rely on a read lock which allows good concurrency.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
(cherry picked from commit 6e5c79a1)

Conflicts:
	src/conf/nwfilter_conf.c
          - virReportOOMError() in context of one hunk.
	src/lxc/lxc_driver.c
          - functions renamed, and lxc object locking changed, creating
            a conflict in the context.

The virConnectPtr is passed around loads of nwfilter code in
order to provide it as a parameter to the callback registered
by the virt drivers. None of the virt drivers use this param
though, so it serves no purpose.

Avoiding the need to pass a virConnectPtr means that the
nwfilterStateReload method no longer needs to open a bogus
QEMU driver connection. This addresses a race condition that
can lead to a crash on startup.

The nwfilter driver starts before the QEMU driver and registers
some callbacks with DBus to detect firewalld reload. If the
firewalld reload happens while the QEMU driver is still starting
up though, the nwfilterStateReload method will open a connection
to the partially initialized QEMU driver and cause a crash.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
(cherry picked from commit 999d72fb)

CVE-2013-6458

Every API that is going to begin a job should do that before fetching
data from vm->def.

(cherry picked from commit 3b564259)

Every API that is going to begin a job should do that before fetching
data from vm->def.

(cherry picked from commit ff5f30b6)

CVE-2013-6458

Every API that is going to begin a job should do that before fetching
data from vm->def.

(cherry picked from commit f93d2caa)

CVE-2013-6458

Generally, every API that is going to begin a job should do that before
fetching data from vm->def. However, qemuDomainGetBlockInfo does not
know whether it will have to start a job or not before checking vm->def.
To avoid using disk alias that might have been freed while we were
waiting for a job, we use its copy. In case the disk was removed in the
meantime, we will fail with "cannot find statistics for device '...'"
error message.

(cherry picked from commit b7992595)

CVE-2013-6458
https://bugzilla.redhat.com/show_bug.cgi?id=1043069

When virDomainDetachDeviceFlags is called concurrently to
virDomainBlockStats: libvirtd may crash because qemuDomainBlockStats
finds a disk in vm->def before getting a job on a domain and uses the
disk pointer after getting the job. However, the domain in unlocked
while waiting on a job condition and thus data behind the disk pointer
may disappear. This happens when thread 1 runs
virDomainDetachDeviceFlags and enters monitor to actually remove the
disk. Then another thread starts running virDomainBlockStats, finds the
disk in vm->def, and while it's waiting on the job condition (owned by
the first thread), the first thread finishes the disk removal. When the
second thread gets the job, the memory pointed to be the disk pointer is
already gone.

That said, every API that is going to begin a job should do that before
fetching data from vm->def.

(cherry picked from commit db86da5c)

CVE-2013-4154

If users haven't configured guest agent then qemuAgentCommand() will
dereference a NULL 'mon' pointer, which causes crash of libvirtd when
using agent based cpu (un)plug.

With the patch, when the qemu-ga service isn't running in the guest,
a expected error "error: Guest agent is not responding: Guest agent
not available for now" will be raised, and the error "error: argument
unsupported: QEMU guest agent is not configured" is raised when the
guest hasn't configured guest agent.

GDB backtrace:

 (gdb) bt
 #0  virNetServerFatalSignal (sig=11, siginfo=<value optimized out>, context=<value optimized out>) at rpc/virnetserver.c:326
 #1  <signal handler called>
 #2  qemuAgentCommand (mon=0x0, cmd=0x7f39300017b0, reply=0x7f394b090910, seconds=-2) at qemu/qemu_agent.c:975
 #3  0x00007f39429507f6 in qemuAgentGetVCPUs (mon=0x0, info=0x7f394b0909b8) at qemu/qemu_agent.c:1475
 #4  0x00007f39429d9857 in qemuDomainGetVcpusFlags (dom=<value optimized out>, flags=9) at qemu/qemu_driver.c:4849
 #5  0x00007f3957dffd8d in virDomainGetVcpusFlags (domain=0x7f39300009c0, flags=8) at libvirt.c:9843

How to reproduce?

 # To start a guest without guest agent configuration
 # then run the following cmdline

 # virsh vcpucount foobar --guest
 error: End of file while reading data: Input/output error
 error: One or more references were leaked after disconnect from the hypervisor
 error: Failed to reconnect to the hypervisor

RHBZ: https://bugzilla.redhat.com/show_bug.cgi?id=984821Signed-off-by: NAlex Jia <ajia@redhat.com>
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
(cherry picked from commit 96518d43)

CVE-2013-2230

Don't overwrite the callback ID returned by
virDomainEventStateRegisterID in ret by 0.

Introduced by abf75aea.
(cherry picked from commit f38c8185)

After abf75aea the compiler screams:

qemu/qemu_driver.c: In function 'qemuNodeDeviceDetachFlags':
qemu/qemu_driver.c:10693:9: error: 'domain' may be used uninitialized in this function [-Werror=maybe-uninitialized]
     pci = virPCIDeviceNew(domain, bus, slot, function);
         ^
qemu/qemu_driver.c:10693:9: error: 'bus' may be used uninitialized in this function [-Werror=maybe-uninitialized]
qemu/qemu_driver.c:10693:9: error: 'slot' may be used uninitialized in this function [-Werror=maybe-uninitialized]
qemu/qemu_driver.c:10693:9: error: 'function' may be used uninitialized in this function [-Werror=maybe-uninitialized]

Since the other functions qemuNodeDeviceReAttach and qemuNodeDeviceReset
looks exactly the same, I've initialized the variables there as well.
However, I am still wondering why those functions don't matter to gcc
while the first one does.
(cherry picked from commit bc09c5d3)

If qemuMonitorBlockJob returned 0, qemuDomainBlockPivot
might return 0 even if an error occured.

https://bugzilla.redhat.com/show_bug.cgi?id=977678
(cherry picked from commit c34107df)

The driver arg to virPCIDeviceDetach is no longer used (the name of the stub driver is now set in the virPCIDevice object, and virPCIDeviceDetach retrieves it from there). Remove it.

virPCIDeviceDetach would previously sometimes consume the input device
object (to put it on the inactive list) and sometimes not. Avoiding
memory leaks required checking beforehand to see if the device was
already on the list, and freeing the device object in the caller only
if there wasn't already an identical object on the inactive list.

This patch makes it consistent - virPCIDeviceDetach will *never*
consume the input virPCIDevice object; if it needs to put one on the
inactive list, it will create a copy and put *that* on the list. This
way the caller knows that it is always their responsibility to free
the device object they created.

Previously stubDriver was always set from a string literal, so it was
okay to use a const char * that wasn't freed when the virPCIDevice was
freed. This will not be the case in the near future, so it is now a
char* that is allocated in virPCIDeviceSetStubDriver() and freed
during virPCIDeviceFree().

Insert calls to the ACL checking APIs in all QEMU driver
entrypoints.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

We can only pass values up to LLONG_MAX through JSON
and QEMU checks if the int64_t number is not negative
at startup since 1.5.0.

https://bugzilla.redhat.com/show_bug.cgi?id=974010

As a consequence of the cgroup layout changes from commit '632f78ca', the
qemuDomainGetSchedulerParameters[Flags]()' and qemuGetSchedulerType() APIs
failed to return data for a non running domain.  This can be seen through
a 'virsh schedinfo <domain>' command which returns:

Scheduler      : Unknown
error: Requested operation is not valid: cgroup CPU controller is not mounted

Prior to that change a non running domain would return:

Scheduler      : posix
cpu_shares     : 0
vcpu_period    : 0
vcpu_quota     : 0
emulator_period: 0
emulator_quota : 0

This patch will restore the capability to return configuration only data
for a non running domain regardless of whether cgroups are available.

Paolo Bonzini pointed out that it's actually possible to migrate a qemu
instance that was paused due to I/O error and it will be able to work on
the destination if the storage is accessible.

This patch introduces flag VIR_MIGRATE_ABORT_ON_ERROR that cancels the
migration in case an I/O error happens while it's being performed and
allows migration without this flag. This flag can be possibly used for
other error reasons that may be introduced in the future.

Convert input XML to migratable before using it in
qemuDomainSaveImageOpen.

XML in the save image is migratable, i.e. doesn't contain implicit
controllers. If these controllers were in a non-default order in the
input XML, the ABI check would fail. Removing and re-adding these
controllers fixes it.

https://bugzilla.redhat.com/show_bug.cgi?id=834196

Avoid leaking virDomainDef if Prepare phase fails before it gets to
qemuMigrationPrepareAny.

This patch fixes changes done in commit 29c1e913
that was pushed without implementing review feedback.

The flag introduced by the patch is changed to VIR_DOMAIN_VCPU_GUEST and
documentation makes the difference between regular hotplug and this new
functionality more explicit.

The virsh options that enable the use of the new flag are changed to
"--guest" and the documentation is fixed too.

Currently, there's a path to use the ncpuinfo variable uninitialized,
which leads to a compiler warning:

    qemu/qemu_driver.c: In function 'qemuDomainGetVcpusFlags':
    qemu/qemu_driver.c:4573:9: error: 'ncpuinfo' may be used
    uninitialized in this function [-Werror=maybe-uninitialized]
             for (i = 0; i < ncpuinfo; i++) {
             ^

This patch adds support for agent-based cpu disabling and enabling to
qemuDomainSetVcpusFlags() API.

This patch implements the VIR_DOMAIN_VCPU_AGENT flag for the
qemuDomainGetVcpusFlags() libvirt API implementation.

The 'online' parameter has only two possible values. Use a bool for it.

Found with 'git grep "= 1"'.

The work was done at the time of snapshot xmlstring parsing

 if (offline && def->memory &&
     def->memory != VIR_DOMAIN_SNAPSHOT_LOCATION_NONE) {
     virReportError(...);
 }

The code for arbitrary guest agent passthrough was horribly broken since
introduction. Fix it to correctly report errors.

If snapshot creation failed for example due to invalid use of the
"REUSE_EXTERNAL" flag, libvirt killed access to the original image file
instead of the new image file. On machines with selinux this kills the
whole VM as the selinux context is enforced immediately.

* qemu_driver.c:qemuDomainSnapshotUndoSingleDiskActive():
    - Kill access to the new image file instead of the old one.

Partially resolves: https://bugzilla.redhat.com/show_bug.cgi?id=906639

After deleting "WithDriver" from the async job function the code was
unaligned.

This is a recurring problem for cygwin :)
For example, see commit 23a4df88.

qemu/qemu_driver.c: In function 'qemuStateInitialize':
qemu/qemu_driver.c:691:13: error: format '%d' expects type 'int', but argument 8 has type 'uid_t' [-Wformat]

* src/qemu/qemu_driver.c (qemuStateInitialize): Add casts.
* daemon/remote.c (remoteDispatchAuthList): Likewise.
Signed-off-by: NEric Blake <eblake@redhat.com>

Function qemuDomainSetBlockIoTune() was checking QEMU capabilities
even when !(flags & VIR_DOMAIN_AFFECT_LIVE) and the domain was
shutoff, resulting in the following problem:

 virsh # domstate asdf; blkdeviotune asdf vda --write-bytes-sec 100
 shut off

 error: Unable to change block I/O throttle
 error: unsupported configuration: block I/O throttling not supported with this QEMU binary

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=965016