The PCI case of the switch statement in this function contains another
switch statement with a case for each model. Currently every model
except pci-root and pcie-root has a check for index > 0 (since only
those two can have index==0), and the function should never be called
for those two anyway. If we move the check for !pci[e]-root to the top
of the pci case, then we can move the check for index > 0 out of the
individual model cases. This will save repeating that check for the
three new controller models about to be added.

Remove one instance of the field being present so that the code that
sets that flag can be tested.

Now that qemuMonitorGetAllBlockStatsInfo collects also wr_highest_offset
the whole function can be killed.

Change the code so that it queries the monitor when the VM is alive.

Instead of using qemuMonitorJSONDevGetBlockExtent (which I plan to
remove later) extract the data in place.

Additionally add a flag that will be set when the wr_highest_offset was
extracted correctly so that callers can act according to that.

The test case addition should help make sure that everything works.

The helper makes sure that strings passed to APIs are non-NULL and
non-empty. This allows to drop some inlined checks where it does not
make sense.

Function prlsdkGetStatsParam was missing a prototype or the static
keyword. I went with static since it built successfully.

Pushed as a build breaker fix.

Implemented counters:
 VIR_DOMAIN_MEMORY_STAT_SWAP_IN
 VIR_DOMAIN_MEMORY_STAT_SWAP_OUT
 VIR_DOMAIN_MEMORY_STAT_MINOR_FAULT
 VIR_DOMAIN_MEMORY_STAT_MAJOR_FAULT
 VIR_DOMAIN_MEMORY_STAT_AVAILABLE
 VIR_DOMAIN_MEMORY_STAT_ACTUAL_BALLOON
 VIR_DOMAIN_MEMORY_STAT_UNUSED

Comments.

1. Use vzDomObjFromDomainRef/virDomainObjEndAPI pair to get domain
object as we use prlsdkGetStatsParam. See previous statistics
comments.

2. Balloon statistics is not applicable to containers. Fault
statistics for containers not provided in PCS6 yet.
Signed-off-by: NNikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>

Comments.

Replace vzDomObjFromDomain/virObjectUnlock pair
to vzDomObjFromDomainRef/virDomainObjEndAPI as we
use prlsdkGetStatsParam. See previous statistics
comments.
Signed-off-by: NNikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>

Make net device lookup by mac return sdk handle
instead of quite ephemeral enumeration index. After
this change there is no need anymore in special
function of removing device by enumeration index.
Signed-off-by: NNikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>

Populate counters SDK currenly supports:
 rx_bytes
 rx_packets
 tx_bytes
 tx_packets

Comments.

Use vzDomObjFromDomainRef/virDomainObjEndAPI pair to get domain
object as we use prlsdkGetStatsParam that can release domain
object lock and thus we need a reference in case domain
is deleated meanwhile.
Signed-off-by: NNikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>

In my previous fix (1310b135) I've tried to solve an ordering
issue.  Well, while it worked it has a side effect of keeping a
temporary file around. My patch was buggy in that sense. Solve
this by properly marking the dependency without any side effect.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Honour our formatting style. Adjust indentation so it matches the
rest of our code.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Honour our formatting style. Adjust indentation so it matches the
rest of our code.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Honour our formatting style. Adjust indentation so it matches the
rest of our code.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Honour our formatting style. Adjust indentation so it matches the
rest of our code.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Honour our formatting style. Adjust indentation so it matches the
rest of our code.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

So far the argument has not much meaning and was practically ignored.
This is not good since when doing memory hotplug, the size of desired
hugepage backing is passed in that argument. Taking closer look at the
tests I'm fixing reveals the bug. For instance, while the following is
in the test:

    <memory model='dimm'>
      <source>
        <nodemask>1-3</nodemask>
        <pagesize unit='KiB'>4096</pagesize>
      </source>
      <target>
        <size unit='KiB'>524287</size>
        <node>0</node>
      </target>
      <address type='dimm' slot='0' base='0x100000000'/>
    </memory>

the generated commandline corresponding to this XML was:

    -object memory-backend-ram,id=memdimm0,size=536870912,\
    host-nodes=1-3,policy=bind

Have you noticed? Yes, memory-backend-ram! Nothing can be further away
from the right answer. The hugepage backing is requested in the XML
and we happily ignore it. This is just not right. It's
memory-backend-file which should have been used:

    -object memory-backend-file,id=memdimm0,prealloc=yes,\
    mem-path=/dev/hugepages4M/libvirt/qemu,size=536870912,\
    host-nodes=1-3,policy=bind

The problem is, that @pagesize passed to qemuBuildMemoryBackendStr
(where this part of commandline is built) was ignored. The hugepage to
back memory was searched only and only by NUMA nodes pinning. This
works only for regular guest NUMA nodes.

Then, I'm changing the hugepages size in the test XMLs too. This is
simply because in the test suite we create dummy mount points just for
2M and 1G hugepages. And in the test 4M was requested. I'm sticking to
2M, but 1G should just work too.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

https://bugzilla.redhat.com/show_bug.cgi?id=1196644

This function constructs the backend (host facing) part of the
memory device.  At the beginning, the configured hugepages are
searched to find the best match for given guest NUMA node.
Configured hugepages can have a @nodeset attribute to specify on
which guest NUMA nodes should be the hugepages backing used.
There is, however, one 'corner case'. Users may just tell 'use
hugepages to back all the nodes'. In other words:

  <memoryBacking>
    <hugepages/>
  </memoryBacking>

  <cpu>
    <numa>
      <cell id='0' cpus='0-1' memory='1024000' unit='KiB'/>
    </numa>
  </cpu>

Our code fails in this case. Well, since there's no @nodeset (nor
any <page/> child element to <hugepages/>) we fail to lookup the
default hugepage size to use.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

https://bugzilla.redhat.com/show_bug.cgi?id=1235116

According to our XML definition, zero is as valid as any other value.
Mainly because it should be kernel-agnostic.
Signed-off-by: NLuyao Huang <lhuang@redhat.com>

Drop locking of the driver since it is not accessed and simplify the
code flow.

Drop internal data structures and use the proper fields in virDomainDef.

This allows to greatly simplify the code and allows to remove the
private data structure that was holding just redundant data.

This patch also fixes the bogous output where we'd report that a fresh
VM without vCPU pinning would not run on all vcpus.

Remove the bogus flag check and refactor the code by using
virDomainObjGetDefs instead of virDomainObjGetPersistentDef.

Reuse testDomObjFromDomain to retrieve domain objects in the rest of
the test driver instead of open-coding it in every API.

Only self-locking APIs are used and the pointer is immutable so there's
no need to lock the driver to access the domain list.

This patch removes locking partially for everything that will not be
converted to testDomObjFromDomain in the next patch.

Don't lock the driver when registering event callbacks.

Make testObjectEventQueue tolerant to NULL @event and move it so that it
does not require a prototype. Additionally we are now able to remove
locking when accessing driver->eventState, since it's using self-locking
APIs and the pointer is immutable.

Some of the fields are either immutable or self locking, so make a note
of that for future reference.

It's filled and then freed, but not used anywhere else.

Avoid reimplementing it 3 times.

When migration fails in qemuMigrationPrepareAny, we unconditionally call
qemuDomainRemoveInactive, which should only be called for transient
domains. The check for !vm->persistent was accidentally removed by
commit 540c339a.
Signed-off-by: NLuyao Huang <lhuang@redhat.com>
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

In the e6d180f0 commit the parallels driver was renamed to vz.
However, there was a commit merged later, which was sent to the list
before the rename. The other commit is 6de12b02. Fix all the
missing renames.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

We already enable the parser option to detect invalid UTF-8, but
didn't test it.  Also, JSON states that behavior of an object
with a duplicated key is undefined; we chose to reject it, but
were not testing it.

With the enhanced tests in place, we can simplify yajl2
initialization by relying on parser defaults being sane.

* src/util/virjson.c (virJSONValueFromString): Simplify.
* tests/jsontest.c (mymain): Test more bad usage.
Signed-off-by: NEric Blake <eblake@redhat.com>

Since older yajl ignores trailing garbage, a client can cause
problems by intentionally ending the wrapper array early. Since
we already track nesting, it's not too much harder to reject
invalid nesting pops.

* src/util/virjson. (_virJSONParser): Add field.
(virJSONValueFromString): Set witness.
(virJSONParserHandleEndArray): Use it to catch abuse.
* tests/jsontest.c (mymain): Test it.
Signed-off-by: NEric Blake <eblake@redhat.com>