- 09 12月, 2014 5 次提交
-
-
由 Laine Stump 提交于
These functions all set/get items in the sysfs for a bridge device.
-
由 Eric Blake 提交于
I'm about to make block stats optionally more complex to cover backing chains, where block.count will no longer equal the number of <disks> for a domain. For these reasons, it is nicer if the statistics output includes the source path (for local files). This patch doesn't add anything for network disks, although we may decide to add that later. With this patch, I now see the following for the same domain as in the previous patch (one qcow2 file, and an empty cdrom drive): $ virsh domstats --block foo Domain: 'foo' block.count=2 block.0.name=hda block.0.path=/var/lib/libvirt/images/foo.qcow2 block.1.name=hdc * src/libvirt-domain.c (virConnectGetAllDomainStats): Document new field. * tools/virsh.pod (domstats): Document new field. * src/qemu/qemu_driver.c (qemuDomainGetStatsBlock): Return the new stat for local files/block devices. (QEMU_ADD_NAME_PARAM): Add parameter. (qemuDomainGetStatsInterface): Update caller. Signed-off-by: NEric Blake <eblake@redhat.com>
-
由 Eric Blake 提交于
I noticed that for an offline domain, 'virsh domstats --block $dom' was producing just the domain name, with no stats. But the older 'virsh domblkinfo' works just fine on offline domains. This patch starts to get us closer, by at least reporting the disk names for an offline domain. With this patch, I now see the following for an offline domain with one qcow2 disk and an empty cdrom drive: $ virsh domstats --block foo Domain: 'foo' block.count=2 block.0.name=hda block.1.name=hdc * src/qemu/qemu_driver.c (qemuDomainGetStatsBlock): Don't short-circuit output of block name. Signed-off-by: NEric Blake <eblake@redhat.com>
-
由 Eric Blake 提交于
At least with 'virsh domstats --block' on an offline domain, we currently output no stats even though we recognize the stat category. Although a later patch will improve this situation, it is better to document that this is expected behavior. Also, while the current implementation rejects filtering flags for virDomainListGetStats, this limitation may be lifted in the future and we do not enforce it at the API level. * src/libvirt-domain.c (virConnectGetAllDomainStats): Document that recognized stats might not be reported. (virDomainListGetStats): Likewise, and tweak filtering documentation. Signed-off-by: NEric Blake <eblake@redhat.com>
-
由 Eric Blake 提交于
qemuDomainGetStatsBlock() could leak a stats hash table if it encountered OOM while populating the virTypedParameters. Oddly, the fix doesn't even touch qemuDomainGetStatsBlock :) * src/qemu/qemu_driver.c (QEMU_ADD_COUNT_PARAM) (QEMU_ADD_NAME_PARAM): Don't return early. (qemuDomainGetStatsInterface): Adjust caller. Signed-off-by: NEric Blake <eblake@redhat.com>
-
- 08 12月, 2014 4 次提交
-
-
由 Christophe Fergeau 提交于
Use 'they' instead of 'he'.
-
由 Martin Kletzander 提交于
Whenever client socket was marked as closed for some reason, it could've been changed when really closing the connection. With this patch the proper reason is kept since the first time it's marked as closed. Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>
-
由 Martin Kletzander 提交于
Each command that needs a connection causes a new connection to be made. Reconnecting after a command failed is pointless, mainly when there is no other command to run. Removeing three lines of code takes care of that and keeps virsh working as it should. Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>
-
由 Peter Krempa 提交于
Other parts of libvirt use "%u" for formatting uid/gid and typecast to unsigned int. Storage driver used the signed variant.
-
- 06 12月, 2014 5 次提交
-
-
由 Chen Fan 提交于
this patch fix some weird typos: 1. < hostdev> => <hostdev> 2. < type> => <type> 3. <virtualport > => <virtualport> 4. redundant comma 5. missing right-half bracket Signed-off-by: NChen Fan <chen.fan.fnst@cn.fujitsu.com>
-
由 John Ferlan 提交于
Add the optional adapter options for pool create/define. Results in either: <adapter type='scsi_host' name='scsi_host2'/> or (on one line) <adapter type='fc_host' parent='scsi_host5' wwnn='20000000c9831b4b' wwpn='10000000c9831b4b'/> being generated.
-
由 John Ferlan 提交于
Add 3 new optional options for the pool-create-as and pool-define-as command in order to define the 3 elements required in order to add an auth element, such as: <auth type='chap' username='myuser'> <secret usage='libvirtiscsi'/> </auth>
-
由 John Ferlan 提交于
Properly format the options and provide meaningful descriptions for the various options.
-
由 John Ferlan 提交于
Fix format of the secret XML in the example. The XML had an extraneous "type='iscsi'" (which is used by the <disk> definitions) The world wide node name had a typo in the acronym (wwwn).
-
- 05 12月, 2014 5 次提交
-
-
由 Erik Skultety 提交于
When user tries to insert element metadata providing a namespace declaration as well, currently we insert the element without any validation check for XML prefix (if provided). The next VM start would then fail with parse error. This patch fixes this issue by adding a call to xmlValidateNCName function to check for illegal characters in the prefix. Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1143921
-
由 Daniel P. Berrange 提交于
If probing capabilities via QMP fails, we now have a check that prevents us falling back to -help parsing. Unfortunately the error message "Failed to probe capabilities for /usr/bin/qemu-kvm: unsupported configuration: QEMU 2.1.2 is too new for help parsing" is proving rather unhelpful to the user. We need to be telling them why QMP failed (the root cause), rather than they can't use -help (the side effect). To do this we should capture stderr during QMP probing, and if -help parsing then sees a new QEMU version, we know that QMP should have worked, and so we can show the messages from stderr. The message thus becomes "Failed to probe capabilities for /usr/bin/qemu-kvm: internal error: QEMU / QMP failed: Could not access KVM kernel module: No such file or directory failed to initialize KVM: No such file or directory"
-
由 Shanzhi Yu 提交于
When attempting to create internal system checkpoint with a passthrough device qemu will report the following error: error: operation failed: Error -22 while writing VM This patch calls the function to check if migration is possible with given VM and thus improves the error to: error: Requested operation is not valid: domain has assigned non-USB host devices Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=874418#c19Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
-
由 Peter Krempa 提交于
To ease debugging permission problems add uid/gid values to the debug message when initializing a storage file backend.
-
由 Michal Privoznik 提交于
https://bugzilla.redhat.com/show_bug.cgi?id=1115292 In one of the previous commits (eafb53fe) we disallowed network-wide bandwidth to some network types. However, we forgot about <portgroups/> which can have <bandwidth/> too. Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
- 04 12月, 2014 14 次提交
-
-
由 Cole Robinson 提交于
-
由 Peter Krempa 提交于
3ecebf07 breaks the build as it adds a way to jump to cleanup before the 'cfg' object is retrieved and 'priv' is initialized.
-
由 Daniel P. Berrange 提交于
The apibuild.py script did not handle whitespace in preprocessor macros, so it failed to detect constants declared with '# define' instead of '#define'. Since we now correctly indent our public header files, we have silently lost all constants from libvirt-api.xml. This also caused us to not detect formatting errors in constant docs
-
由 Peter Krempa 提交于
Move entering the job into the thread to simplify the program flow. Also as the code holds a separate reference to the domain object some conditions can be simplified. After this patch qemuDomainObjTransferJob is no longer needed so this patch removes it.
-
由 Ian Campbell 提交于
On a Debian system lacking the w3c-dtd-xhtml package the build fails with: $ make -C docs/ formatcaps.html make: Entering directory '/local/scratch/ianc/devel/libvirt.git/docs' Generating formatcaps.html.tmp I/O error : Attempt to load network entity http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd formatcaps.html.in:2: warning: failed to load external entity "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd" C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd" ^ I/O error : Attempt to load network entity http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd ../docs/sitemap.html.in:2: warning: failed to load external entity "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd" C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd" ^ missing XHTML1 DTD rm formatcaps.html.tmp make: Leaving directory '/local/scratch/ianc/devel/libvirt.git/docs' $ ls docs/formatcaps* docs/formatcaps.html.in https://www.redhat.com/archives/libvir-list/2009-November/msg00413.html suggests that the XHTML1 DTD should not be a hard requirement and the docs should be generated but not validated if it is not available. Therefore when the DTD is not available arrange for the .html.tmp file to be propagated to the .html output. Signed-off-by: NIan Campbell <ian.campbell@citrix.com> Cc: Daniel Veillard <veillard@redhat.com>
-
由 Martin Kletzander 提交于
When trying clang, it found out that we were comparing sizeof with 0 even though we wanted to check the return value of memcmp. That showed us that the test was wrong and it needs a fix as well. Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>
-
由 Conrad Meyer 提交于
Reboot requires more sophistication and is left as a future work item -- but at least part of the plumbing is in place. Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
由 Erik Skultety 提交于
If someone removes blockcopy storage file when still in mirroring phase and then requesting blockjob abort using pivot, virsh cmd freezes. This is not an issue with older qemu versions which did not support asynchronous jobs (which we prefer by default). As we have reached the mirroring phase successfully, polling monitor for blockjob info always returns 1 and the loop never ends. This fix introduces a check for qemuDomainBlockPivot return code, possibly skipping the asynchronous waiting completely, if an error occurred and asynchronous waiting was the preferred method. Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1139567
-
由 John Ferlan 提交于
This changes the display from: libvirt-storage: APIs for management of storages to libvirt-storage: APIs for management of storage pools and volumes In making that change I expected my build tree html output to be regenerated; however, it wasn't because the dependency for the separated libvirt-storage.h wasn't there. It was only present for libvirt.h.in So I added each in the order displayed on the docs/html/index.html page
-
由 Pavel Hrdina 提交于
Commit 86a15a25 introduced a new cpu driver API 'getModels'. Public API allow you to pass NULL for models to get only number of existing models. However the new code will crash with segfault so we have to count with the possibility that the user wants only the number. There is also difference in order of the models gathered by this new API as the old approach was inserting the elements to the end of the array so we should use 'VIR_APPEND_ELEMENT'. Signed-off-by: NPavel Hrdina <phrdina@redhat.com>
-
由 Peter Krempa 提交于
Reconnect to the VM is a possibly long-running job spawned in a separate thread. We should reload the snapshot defs and managedsave state prior to spawning the thread to avoid blocking of the daemon startup which would serialize on the VM lock. Also the reloading code would violate the domain job held while reconnecting as the loader functions don't create jobs.
-
由 Peter Krempa 提交于
Introduced in ca6dbdd0
-
由 Peter Krempa 提交于
Coverity pointed out that in other places we always check the return value from virJSONValueObjectGetNumberLong() but not in the new addition in leaseshelper. To solve the issue and also be more robust in case somebody would corrupt the file, skip outputting of the lease entry in case the expiry time is missing.
-
由 Luyao Huang 提交于
https://bugzilla.redhat.com/show_bug.cgi?id=1087104#c5 When trying to use an invalid offset to virStorageVolUpload(), libvirt fails in virFDStreamOpenFileInternal(), although it seems libvirt does not check the return in storageVolUpload(), and calls virFDStreamSetInternalCloseCb() right after. But stream doesn't have a privateData (is NULL) yet, and the daemon crashes then. 0 0x00007f09429a9c10 in pthread_mutex_lock () from /lib64/libpthread.so.0 1 0x00007f094514dbf5 in virMutexLock (m=<optimized out>) at util/virthread.c:88 2 0x00007f09451cb211 in virFDStreamSetInternalCloseCb at fdstream.c:795 3 0x00007f092ff2c9eb in storageVolUpload at storage/storage_driver.c:2098 4 0x00007f09451f46e0 in virStorageVolUpload at libvirt.c:14000 5 0x00007f0945c78fa1 in remoteDispatchStorageVolUpload at remote_dispatch.h:14339 6 remoteDispatchStorageVolUploadHelper at remote_dispatch.h:14309 7 0x00007f094524a192 in virNetServerProgramDispatchCall at rpc/virnetserverprogram.c:437 Signed-off-by: NLuyao Huang <lhuang@redhat.com>
-
- 03 12月, 2014 7 次提交
-
-
由 Shanzhi Yu 提交于
Commit 570d0f63 describes disabling negative offset usage for vol-upload/download (e.g. cmdVolDownload and cmdVolUpload; however, the change was only made to cmdVolDownload. There was no change to cmdVolUpload. This patch adds the same checks for vol-upload. Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1087104Signed-off-by: NShanzhi Yu <shyu@redhat.com>
-
由 Peter Krempa 提交于
Now that we don't use the leases file at all for leases just don't format it into the config and use the leaseshelper to do all the lifting.
-
由 Peter Krempa 提交于
Untangle a few conditions into a case statement and improve reporting of invaid commands.
-
由 Nehal J Wani 提交于
This patch enables the helper program to detect event(s) triggered when there is a change in lease length or expiry and client-id. This transfers complete control of leases database to libvirt and obsoletes use of the lease database file (<network-name>.leases). That file will not be created, read, or written. This is achieved by adding the option --leasefile-ro to dnsmasq and passing a custom env var to leaseshelper, which helps us map events related to leases with their corresponding network bridges, no matter what the event be. Also, this requires the addition of a new non-lease entry in our custom lease database: "server-duid". It is required to identify a DHCPv6 server. Now that dnsmasq doesn't maintain its own leases database, it relies on our helper program to tell it about previous leases and server duid. Thus, this patch makes our leases program honor an extra action: "init", in which it sends the known info in a particular format to dnsmasq by printing it to stdout. The drawback of this change is that upgrade to this new approach does not transfer the existing leases for the network if the leaseshelper wasn't already used.
-
由 Daniel Hansel 提交于
For Intel and PowerPC the implementation is calling a cpu driver function across driver layers (i.e. from qemu driver directly to cpu driver). The correct behavior is to use libvirt API functionality to perform such a inter-driver call. This patch introduces a new cpu driver API function getModels() to retrieve the cpu models. The currect implementation to process the cpu_map XML content is transferred to the INTEL and PowerPC cpu driver specific API functions. Additionally processing the cpu_map XML file is not safe due to the fact that the cpu map does not exist for all architectures. Therefore it is better to encapsulate the processing in the architecture specific cpu drivers. Signed-off-by: NDaniel Hansel <daniel.hansel@linux.vnet.ibm.com> Reviewed-by: NBoris Fiuczynski <fiuczy@linux.vnet.ibm.com> Reviewed-by: NViktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
-
由 Michal Privoznik 提交于
Based on previous commit, we can now precreate missing volumes. While digging out the functionality from storage driver would be nicer, if you've seen the code it's nearly impossible. So I'm going from the other end: 1) For given disk target, disk path is looked up. 2) For the disk path, storage pool is looked up, a volume XML is constructed and then passed to virStorageVolCreateXML() which has all the knowledge how to create raw images, (encrypted) qcow(2) images, etc. One of the advantages of this approach is, we don't have to care about image conversion - qemu does that for us. So for instance, users can transform qcow2 into raw on migration (if the correct XML is passed to the migration API). Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
由 Michal Privoznik 提交于
Up 'til now, users need to precreate non-shared storage on migration themselves. This is not very friendly requirement and we should do something about it. In this patch, the migration cookie is extended, so that <nbd/> section does not only contain NBD port, but info on disks being migrated. This patch sends a list of pairs of: <disk target; disk size> to the destination. The actual storage allocation is left for next commit. Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-