- 16 10月, 2008 2 次提交
-
-
由 Chris Lalancette 提交于
POTFILES.in. Add it there, and then fix up one warning about included c-ctypes.h that wasn't being used. Signed-off-by: NChris Lalancette <clalance@redhat.com>
-
由 Richard W.M. Jones 提交于
Add a Windows icon resource.
-
- 15 10月, 2008 1 次提交
-
-
由 Richard W.M. Jones 提交于
configured --without-libvirtd. Also adds debugging of registration events.
-
- 14 10月, 2008 1 次提交
-
-
由 Jim Meyering 提交于
Building with --disable-nls exposed many new warnings like these: virsh.c:4952: warning: format not a string literal and no format ... util.c:163: warning: format not a string literal and no format arguments All but one of the following changes add a "%s" argument before the offending _(...) argument. This was the only manual change: * src/lxc_driver.c (lxcVersion): Use %s and strerror(errno) rather than %m, to avoid a warning from gcc -Wformat-security. Add "%s" before each warned about format-string-with-no-%-directive: * src/domain_conf.c (virDomainHostdevSubsysUsbDefParseXML) (virDomainDefParseString, virDomainDefParseFile): * src/hash.c (virGetConnect, __virGetDomain, virReleaseDomain) (__virGetNetwork, virReleaseNetwork, __virGetStoragePool) (virReleaseStoragePool, __virGetStorageVol, virReleaseStorageVol): * src/lxc_container.c (lxcContainerChild): * src/lxc_driver.c (lxcDomainDefine, lxcDomainUndefine) (lxcDomainGetInfo, lxcGetOSType, lxcDomainDumpXML) (lxcSetupInterfaces, lxcDomainStart, lxcDomainCreateAndStart) (lxcVersion, lxcGetSchedulerParameters): * src/network_conf.c (virNetworkDefParseString) (virNetworkDefParseFile): * src/openvz_conf.c (openvzReadNetworkConf, openvzLoadDomains): * src/openvz_driver.c (openvzDomainDefineCmd) (openvzDomainGetInfo, openvzDomainDumpXML, openvzDomainShutdown) (openvzDomainReboot, ADD_ARG_LIT, openvzDomainDefineXML) (openvzDomainCreateXML, openvzDomainCreate, openvzDomainUndefine) (openvzDomainSetAutostart, openvzDomainGetAutostart) (openvzDomainSetVcpus): * src/qemu_driver.c (qemudDomainBlockPeek, qemudDomainMemoryPeek): * src/remote_internal.c (remoteDomainBlockPeek) (remoteDomainMemoryPeek, remoteAuthPolkit): * src/sexpr.c (sexpr_new, _string2sexpr): * src/storage_backend_disk.c (virStorageBackendDiskMakeDataVol) (virStorageBackendDiskCreateVol): * src/storage_backend_fs.c (virStorageBackendFileSystemNetFindPoolSources): * src/storage_backend_logical.c (virStorageBackendLogicalFindLVs) (virStorageBackendLogicalFindPoolSources): * src/test.c (testOpenDefault, testOpenFromFile, testOpen) (testGetDomainInfo, testDomainRestore) (testNodeGetCellsFreeMemory): * src/util.c (virExec): * src/virsh.c (cmdAttachDevice, cmdDetachDevice) (cmdAttachInterface, cmdDetachInterface, cmdAttachDisk) (cmdDetachDisk, cmdEdit): * src/xend_internal.c (do_connect, wr_sync, xend_op_ext) (urlencode, xenDaemonDomainCreateXML) (xenDaemonDomainLookupByName_ids, xenDaemonDomainLookupByID) (xenDaemonParseSxprOS, xend_parse_sexp_desc_char) (xenDaemonParseSxprChar, xenDaemonParseSxprDisks) (xenDaemonParseSxpr, sexpr_to_xend_topology, sexpr_to_domain) (xenDaemonDomainFetch, xenDaemonDomainGetAutostart) (xenDaemonDomainSetAutostart, xenDaemonDomainMigratePerform) (xenDaemonDomainDefineXML, xenDaemonGetSchedulerType) (xenDaemonGetSchedulerParameters) (xenDaemonSetSchedulerParameters, xenDaemonDomainBlockPeek) (xenDaemonFormatSxprChr, virDomainXMLDevID): * src/xm_internal.c (xenXMConfigCacheRefresh, xenXMDomainPinVcpu) (xenXMDomainCreate, xenXMDomainDefineXML) (xenXMDomainAttachDevice, xenXMDomainDetachDevice): * src/xml.c (virXPathString, virXPathNumber, virXPathLong) (virXPathULong, virXPathBoolean, virXPathNode, virXPathNodeSet): * src/xs_internal.c (xenStoreOpen):
-
- 13 10月, 2008 2 次提交
-
-
由 Richard W.M. Jones 提交于
* docs/formatdomain.html.in, docs/formatdomain.html: Add the documentation for NIC model selection.
-
由 Richard W.M. Jones 提交于
* src/domain_conf.c: Fix build failure of the Xen proxy.
-
- 11 10月, 2008 4 次提交
-
-
由 Jim Meyering 提交于
This repairs the "make check" failure of tests/undefine. * src/test.c (testResumeDomain, testPauseDomain): Likewise. (testShutdownDomain, testGetDomainInfo, ): Likewise. (testSetMemory, testSetVcpus, testDomainCreate, testDomainUndefine) (testDomainGetSchedulerType, testDomainGetSchedulerParams): Likewise. (testDomainSetSchedulerParams, testNetworkUndefine): Likewise. (testNetworkStart, testNetworkGetBridgeName): Likewise. (testDomainCoreDump, testDomainSave): Likewise, and... Name the file upon failed open or write. Use strerror(errno) in diagnostics. * tests/undefine: Adjust expected output. test.c (testError): Remove now-ignored dom and net parameters. This is a sytnax-only change: removing the two unused parameters and updating all callers: * src/test.c (GET_DOMAIN, GET_NETWORK, testError) (testBuildCapabilities, testOpenDefault, testOpenFromFile) (testOpen, testGetHostname, testGetURI, testGetCapabilities) (testLookupDomainByID, testLookupDomainByUUID) (testLookupDomainByName, testResumeDomain, testPauseDomain) (testShutdownDomain, testGetDomainInfo, testDomainSave) (testDomainRestore, testDomainCoreDump, testGetOSType) (testSetMemory, testSetVcpus, testListDefinedDomains) (testNodeGetCellsFreeMemory, testDomainCreate) (testDomainUndefine, testDomainGetSchedulerType) (testDomainGetSchedulerParams, testDomainSetSchedulerParams) (testLookupNetworkByUUID, testLookupNetworkByName) (testListNetworks, testListDefinedNetworks, testNetworkUndefine) (testNetworkStart, testNetworkGetBridgeName): Update callers.
-
由 Daniel P. Berrange 提交于
-
由 Daniel P. Berrange 提交于
-
由 Daniel P. Berrange 提交于
-
- 10 10月, 2008 8 次提交
-
-
由 Daniel P. Berrange 提交于
-
由 Daniel P. Berrange 提交于
-
由 Daniel P. Berrange 提交于
-
由 Daniel P. Berrange 提交于
-
由 Daniel P. Berrange 提交于
-
由 Richard W.M. Jones 提交于
* .cvsignore, Makefile.am, autobuild.sh, configure.in, mingw32-libvirt.spec.in: Import the latest MinGW libvirt spec file. Note that the file has been renamed to conform to new Fedora packaging guidelines. * autobuild.sh: Fix a bug in the generation of the $EXTRA_RELEASE field when autobuilding.
-
由 Daniel Veillard 提交于
* include/libvirt/libvirt.h[.in] include/libvirt/virterror.h qemud/remote* src/driver.h src/libvirt.c src/libvirt_sym.version src/lxc_driver.c src/openvz_driver.c src/proxy_internal.c src/qemu_driver.c src/remote_internal.c src/test.c src/virsh.c src/xen_internal.c src/xen_unified.c src/xen_unified.h src/xend_internal.c src/xend_internal.h src/xm_internal.c src/xs_internal.c docs/*: cleanup virDomainCreateLinux into virDomainDefineXML, and a few additional cleanups Daniel
-
由 Daniel Veillard 提交于
* src/domain_conf.c src/util.c: fix index creation for disks > {sd,hd,xvd,vd}z (Sanjay Rao and Chris Wright) Daniel
-
- 09 10月, 2008 3 次提交
-
-
由 Cole Robinson 提交于
-
由 Daniel P. Berrange 提交于
-
由 Dan Smith 提交于
-
- 08 10月, 2008 4 次提交
-
-
由 Daniel Veillard 提交于
* src/cgroup.c: use safewrite() * src/qemu_driver.c: missing VIR_FREE pojnted out by Eduardo Habkost Daniel
-
由 Jim Meyering 提交于
* src/cgroup.c (virCgroupSetValueStr): Use safe_write, not write.
-
由 Daniel Veillard 提交于
daniel
-
由 Daniel Veillard 提交于
(Guido Günther) Daniel
-
- 07 10月, 2008 3 次提交
-
-
由 Cole Robinson 提交于
-
由 Cole Robinson 提交于
-
由 Cole Robinson 提交于
-
- 06 10月, 2008 3 次提交
-
-
由 Daniel Veillard 提交于
* src/lxc_driver.c src/qemu_driver.c src/remote_internal.c src/storage_driver.c: use C99 initializers for virState (Guido Gunther) Daniel
-
由 Daniel P. Berrange 提交于
-
由 Daniel Veillard 提交于
daniel
-
- 04 10月, 2008 2 次提交
- 02 10月, 2008 2 次提交
-
-
由 Daniel Veillard 提交于
daniel
-
由 Cole Robinson 提交于
-
- 01 10月, 2008 1 次提交
-
-
由 Daniel Veillard 提交于
* src/xend_internal.c: fix ordering when parsing multiple Xen interfaces, patch by Jim Fehlig * python/Makefile.am: fix parallel build Daniel
-
- 25 9月, 2008 1 次提交
-
-
由 Mark McLoughlin 提交于
* docs/virsh.pod: fixup some minor issues - e.g. bogus references to "xm"
-
- 24 9月, 2008 2 次提交
-
-
由 Daniel Veillard 提交于
Daniel
-
由 Daniel Veillard 提交于
* src/storage_backend_logical.c: re-add the -f flag to vgremove * po/*: rebuilt Daniel
-
- 23 9月, 2008 1 次提交
-
-
由 Daniel Veillard 提交于
Daniel
-