Allow the platform driver impls to run logic before and after the
firewall reload process.
Reviewed-by: NLaine Stump <laine@laine.org>
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

disk->mirror would not be cleared while the local pointer was freed in
qemuDomainBlockCommit if qemuDomainObjExitMonitor or qemuBlockJobDiskNew
would return a failure.

Since block job handling is executed in the separate handler which needs
a qemu job, we don't need to pre-set the mirror state prior to starting
the job. Similarly the block copy job does not do that.

Move the setting of the data after starting the job so that we avoid
this problem.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

While this should not be necessary as we clear it in the event handler,
let's be sure and clear it prior to starting the job.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Switching a block job to some states (e.g. QEMU_BLOCKJOB_STATE_READY)
might not require a job, thus if it will become ready asynchronously we
should not overwrite the state any more.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

While the callers should make sure that they don't call
qemuBlockJobEmitEvents for any internal state or job, let's add checks
that prevents us from emitting wrong events altogether.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Mixing documentation strings trailing the enum value and preceeding the
enum value ends in a big mixup. Fix docs string for
VIR_DOMAIN_BLOCK_JOB_TYPE_UNKNOWN so that it's not squished together
with the next one.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

https://bugzilla.redhat.com/show_bug.cgi?id=1665553

Ceph can be mounted just like any other filesystem and in fact is
a shared and cluster filesystem. The filesystem magic constant
was taken from kernel sources as it is not in magic.h yet.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NErik Skultety <eskultet@redhat.com>

We have this very handy macro called VIR_STEAL_PTR() which steals
one pointer into the other and sets the other to NULL. The
following coccinelle patch was used to create this commit:

  @ rule1 @
  identifier a, b;
  @@

  - b = a;
    ...
  - a = NULL;
  + VIR_STEAL_PTR(b, a);

Some places were clean up afterwards to make syntax-check happy
(e.g. some curly braces were removed where the body become a one
liner).
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NErik Skultety <eskultet@redhat.com>

Signed-off-by: NRoman Bogorodskiy <bogorodskiy@gmail.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Document the <bhyve:commandline> element which allows
to inject custom command line arguments for bhyve.
Signed-off-by: NRoman Bogorodskiy <bogorodskiy@gmail.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Implement support for passing custom command line arguments
to bhyve using the 'bhyve:commandline' element:

  <bhyve:commandline>
    <bhyve:arg value='-newarg'/>
  </bhyve:commandline>

 * Define virDomainXMLNamespace for the bhyve driver, which
   at this point supports only the 'commandline' element
   described above,
 * Update command generation code to inject these command line
   arguments between driver-generated arguments and the vmname
   positional argument.
Signed-off-by: NRoman Bogorodskiy <bogorodskiy@gmail.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

A couple places in the docs didn't get updated when the forward mode
"open" was added.
Signed-off-by: NLaine Stump <laine@laine.org>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>

networkMigrateStateFiles was added nearly 5 years ago when the network
state directory was moved from /var/lib/libvirt to /var/run/libvirt
just prior to libvirt-1.2.4). It was only required to maintain proper
state information for networks that were active during an upgrade that
didn't involve rebooting the host. At this point the likelyhood of
anyone upgrading their libvirt from pre-1.2.4 directly to 5.0.0 or
later *without rebooting the host* is probably so close to 0 that no
properly informed bookie would take *any* odds on it happening, so it
seems appropriate to remove this pointless code.
Signed-off-by: NLaine Stump <laine@laine.org>
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>

Upcoming patches need an array of strings for use in QMP
block-dirty-bitmap-merge.  A convenience wrapper cuts down
on the verbosity of creating the array, similar to the
existing virJSONValueObjectAppendString().
Signed-off-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

A function that returns -1 for multiple possible failures, but only
raises a libvirt error for some of those failures, can be hard to
use correctly. Yet both of our JSON object/array appenders fall in
that pattern.  True, the silent errors represent coding bugs that
none of the callers should ever trigger, while the noisy errors
represent memory failures that can happen anywhere, so we happened
to never end up failing without an error. But it is better to
either use the _QUIET memory allocation variants, and make callers
decide to report failure; or make all failure paths noisy. This
patch takes the latter approach.
Signed-off-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Strictly speaking, this should go near vshCompleter typedef
declaration. However, I find it more useful near actual completer
implementations.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Now that the nested loop is gone.
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NCole Robinson <crobinso@redhat.com>

Use qemuBuildControllersCommandLine since it builds the command line
for (nearly) all controllers, not just one.
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NCole Robinson <crobinso@redhat.com>

section
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NCole Robinson <crobinso@redhat.com>

Since they go on the USB bus, format them after USB hubs.

https://bugzilla.redhat.com/show_bug.cgi?id=1375402Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NCole Robinson <crobinso@redhat.com>

Now that the inner loop does not require any other variables,
it can be easily separated. Apart from reducing the indentation
level this will allow it to be called from different code paths.
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NCole Robinson <crobinso@redhat.com>

Now that it's no longer needed, remove the argument.
This removes the last helper variable in
qemuBuildControllerDevCommandLine.
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NCole Robinson <crobinso@redhat.com>

qemuBuildLegacyUSBControllerCommandLine is the only place where
we need to count the USB controllers.

Count them again instead of keeping track in a variable passed to
qemuBuildControllerDevStr.

This removes the need for another variable in the loop in
qemuBuildControllerDevCommandLine.
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NCole Robinson <crobinso@redhat.com>

Count them in qemuBuildLegacyUSBControllerCommandLine to remove
yet another variable accessed from the loop in
qemuBuildControllerDevCommandLine.
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NCole Robinson <crobinso@redhat.com>

Shorten some long conditions.
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NCole Robinson <crobinso@redhat.com>

This removes the need to mark it in the 'usbcontroller' variable.
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NCole Robinson <crobinso@redhat.com>

Move out the code formatting "-usb" on the QEMU command line.
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NCole Robinson <crobinso@redhat.com>

Similar to what commit 86dba8f3 did for virPortAllocatorRelease,
ignore port 0 in virPortAllocatorSetUsed.

For all the reasonable use cases the callers already check that
the port is non-zero, however if the port from the XML overflows
unsigned short and turns into 0, it can be set as used by
virPortAllocatorSetUsed but not released by virPortAllocatorRelease.

Also skip port '0' in virPortAllocatorSetUsed to make this behavior
symmetric.

The serenity was disturbed by commit 5dbda5e9 which started using
virPortAllocatorRelease instead of virPortAllocatorSetUsed (false).

https://bugzilla.redhat.com/show_bug.cgi?id=1591645Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NCole Robinson <crobinso@redhat.com>

There is no "GNU Lesser General Public License, version 2",
only version 2.1 and later. In "version 2", the license was
still called "Library" instead of "Lesser". So assume that
version 2.1 is meant here.
Signed-off-by: NThomas Huth <thuth@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>
Signed-off-by: NJán Tomko <jtomko@redhat.com>

The tools/virt-xml-validate.in file is licensed under the terms of
the GPL, but then says "You should have received a copy of the
GNU *Lesser* General Public License". Thus scratch the "Lesser" here.
Signed-off-by: NThomas Huth <thuth@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>
Signed-off-by: NJán Tomko <jtomko@redhat.com>

The bootstrap.conf is licensed under the terms of the LGPL, but then
suggests to "See the GNU General Public License for more details".
That should be the "GNU Lesser General Public License" instead, of
course.
Signed-off-by: NThomas Huth <thuth@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>
Signed-off-by: NJán Tomko <jtomko@redhat.com>

Switch qemuBuildVirtioDevStr to use virDomainDeviceSetData: callers
pass in the virDomainDeviceType and the void * DefPtr. This will
save us from having to repeatedly extend the function argument
list in subsequent patches.
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>
Signed-off-by: NCole Robinson <crobinso@redhat.com>

This is essentially a wrapper for easily setting the variable
name in virDomainDeviceDef that matches its associated
VIR_DOMAIN_DEVICE_TYPE.
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>
Signed-off-by: NCole Robinson <crobinso@redhat.com>

Current code essentially duplicates the same logic, but misses
some cases (like vhost-vsock-device).
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>
Signed-off-by: NCole Robinson <crobinso@redhat.com>

The vhost-scsi device string should depend on the requested
address type, not strictly on the emulated arch. This is the
same logic used by qemuBuildVirtioDevStr, and this particular
path is already tested in the hostdev-scsi-vhost-scsi-ccw tests
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>
Signed-off-by: NCole Robinson <crobinso@redhat.com>

Move the rng->model == VIRTIO check to parse time. This also
allows us to remove similar checks throughout the qemu driver
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>
Signed-off-by: NCole Robinson <crobinso@redhat.com>

If we validate that memballoon is NONE|VIRTIO at parse time,
we can drop similar checks elsewhere in the qemu driver
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>
Signed-off-by: NCole Robinson <crobinso@redhat.com>

This will be extended in the future, so let's simplify things by
centralizing the checks.
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>
Signed-off-by: NCole Robinson <crobinso@redhat.com>

So later code can more easily access def->model
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>
Signed-off-by: NCole Robinson <crobinso@redhat.com>

Found that it was missing in formatstorage and had a few typos
in the storage driver page.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
Reviewed-by: NCole Robinson <crobinso@redhat.com>