If there is an error hotpluging a net device (for whatever
reason) a rollback operation is performed. However, whilst doing
so various helper functions that are called report errors on
their own. This results in the original error to be overwritten
and thus misleading the user.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Even though using /dev/shm/asdf as the backend, we still need to make
the mapping shared.  The original patch forgot to add that parameter.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1392031Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

There's one copy paste error where a comment mentions QEMU
instead of LXC driver.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

../../src/qemu/qemu_capabilities.c:3757: error: declaration of
'basename' shadows a global declaration [-Wshadow]
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

Function qemuDomainAttachShmemDevice() steals the device data if the
hotplug was successful, but the condition checked for unsuccessful
execution otherwise.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Propagate the selected or default level to qemu if it's supported.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1376009Signed-off-by: NPrasanna Kumar Kalever <prasanna.kalever@redhat.com>
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>

This helps in selecting log level of the gluster gfapi, output to stderr.
The option is 'gluster_debug_level', can be tuned by editing
'/etc/libvirt/qemu.conf'

Debug levels ranges 0-9, with 9 being the most verbose, and 0
representing no debugging output.  The default is the same as it was
before, which is a level of 4.  The current logging levels defined in
the gluster gfapi are:

    0 - None
    1 - Emergency
    2 - Alert
    3 - Critical
    4 - Error
    5 - Warning
    6 - Notice
    7 - Info
    8 - Debug
    9 - Trace
Signed-off-by: NPrasanna Kumar Kalever <prasanna.kalever@redhat.com>
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>

Teach qemu driver to detect whether qemu supports specifying debug level
for gluster volumes.
Signed-off-by: NPrasanna Kumar Kalever <prasanna.kalever@redhat.com>
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>

Allow detecting capabilities according to the qemu QMP schema. This is
necessary as sometimes the availability of certain options depends on
the presence of a field in the schema.

This patch adds support for loading the QMP schema when detecting qemu
capabilities and adds a very simple query language to allow traversing
the schema and selecting a certain element from it.

The infrastructure in this patch uses a query path to set a specific
capability flag according to the availability of the given element in
the schema.

Call 'query-qmp-schema' and store the returned types in a hash table
keyed by the 'name' field so that the capabilities code can traverse it.

Simplifies cases where JSON array members need to be transferred to a
different structure.

Some operations like reboot, save, coreDump, blockStats,
ifaceStats make sense iff domain is running. While it is
technically possible for our test driver to return success
regardless of domain state, we should copy constraints from
other drivers and thus deny these operations over inactive
domains.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

https://bugzilla.redhat.com/show_bug.cgi?id=1379196

Add check in qemuCheckDiskConfig for an invalid combination
of using the 'scsi' bus for a block 'lun' device and any disk
source format other than 'raw'.

Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

extracted from VirutalBox SDK and reindented with cppi.

Fixes the behavior when destroying a domain more than once.
VIR_ERR_OPERATION_INVALID should be raised when destroying an
already destroyed domain.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Commit c29e6d48 cause build failure on RHEL-6:

../../src/qemu/qemu_capabilities.c: In function 'virQEMUCapsIsValid':
../../src/qemu/qemu_capabilities.c:4085: error: declaration of 'ctime'
shadows a global declaration [-Wshadow]
/usr/include/time.h:258: error: shadowed declaration is here [-Wshadow]
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

Let's keep all run time validation of cached QEMU capabilities in
virQEMUCapsIsValid and call it whenever we access the cache.
virQEMUCapsInitCached should keep only the checks which do not make
sense once the cache is loaded in memory.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

virQEMUCapsLoadCache loads QEMU capabilities from a file, but strangely
enough it returns the loaded QEMU binary ctime in qemuctime parameter
instead of storing it in qemuCaps.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

 On BSD family OSes (Free/Net/Open/DragonFlyBSD, Mac OS) and
 Solaris loopback interface is called 'lo0' instead of just 'lo'.

This is needed in order to migrate a domain with shmem devices as that
is not allowed to migrate.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

QEMU added support for ivshmem-plain and ivshmem-doorbell.  Those are
reworked varians of legacy ivshmem that are compatible from the guest
POV, but not from host's POV and have sane specification and handling.

Details about the newer device type can be found in qemu's commit
5400c02b90bb:

  http://git.qemu.org/?p=qemu.git;a=commit;h=5400c02b90bbSigned-off-by: NMartin Kletzander <mkletzan@redhat.com>

We're keeping some things at default and that's not something we want to
do intentionally.  Let's save some sensible defaults upfront in order to
avoid having problems later.  The details for the defaults (of the newer
implementation) can be found in qemu's commit 5400c02b90bb:

  http://git.qemu.org/?p=qemu.git;a=commit;h=5400c02b90bb

Since we are merely saving the defaults it will not change the guest ABI
and thanks to the fact that we're doing it in the PostParse callback it
will not break the ABI stability checks.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

The old ivshmem is deprecated in QEMU, so let's use the better
ivshmem-{plain,doorbell} variants instead.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Just the default one now, new ones will be added in following commits.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Unlike other migration capabilities, post-copy is also set on the
destination host which means it doesn't disappear once domain is
migrated. As a result of that other functionality which internally uses
migration to a file (virDomainManagedSave, virDomainSave,
virDomainCoreDump) may fail after migration because the post-copy
capability is still set.

https://bugzilla.redhat.com/show_bug.cgi?id=1374718Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

commit 9065cfaa added the ability to disable DNS services for a
libvirt virtual network. If neither DNS nor DHCP is needed for a
network, then we don't need to start dnsmasq, so code was added to
check for this.

Unfortunately, it was written with a great lack of attention to detail
(I can say that, because I was the author), and the loop that checked
if DHCP is needed for the network would never end if the network had
multiple IP addresses and the first <ip> had no <dhcp> subelement
(which would have contained a <range> or <host> subelement, thus
requiring DHCP services).

This patch rewrites the check to be more compact and (more
importantly) finite.

This bug was present in release 2.2.0 and 2.3.0, so will need to be
backported to any relevant maintainence branches.

Reported here:
  https://www.redhat.com/archives/libvirt-users/2016-October/msg00032.html
  https://www.redhat.com/archives/libvirt-users/2016-October/msg00045.html

If we failed to unlink old dom cfg file, we goto rollback.
But inside rollback, we fogot to unlink the new dom cfg file.
This patch fixes this issue.
Signed-off-by: NChen Hanxiao <chenhanxiao@gmail.com>
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Whilst working on another issue, I've noticed that in some
functions we have a local @driver variable among with access to
global @qemu_driver variable. This makes no sense.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Rather than waiting until we've free'd up all the resources, cause the
'workerPool' thread pool to flush as soon as possible during stateCleanup.
Otherwise, it's possible something waiting to run will SEGV such as is the
case during race conditions of simultaneous exiting libvirtd and qemu process.
Resolves the following crash:

[1] crash backtrace: (bt is shortened a bit):

0  0x00007ffff7282f2b in virClassIsDerivedFrom
   (klass=0xdeadbeef, parent=0x55555581d650) at util/virobject.c:169
1  0x00007ffff72835fd in virObjectIsClass
   (anyobj=0x7fffd024f580, klass=0x55555581d650) at util/virobject.c:365
2  0x00007ffff7283498 in virObjectLock
   (anyobj=0x7fffd024f580) at util/virobject.c:317
3  0x00007ffff722f0a3 in virCloseCallbacksUnset
   (closeCallbacks=0x7fffd024f580, vm=0x7fffd0194db0,
    cb=0x7fffdf1af765 <qemuProcessAutoDestroy>)
   at util/virclosecallbacks.c:164
4  0x00007fffdf1afa7b in qemuProcessAutoDestroyRemove
   (driver=0x7fffd00f3a60, vm=0x7fffd0194db0) at qemu/qemu_process.c:6365
5  0x00007fffdf1adff1 in qemuProcessStop
   (driver=0x7fffd00f3a60, vm=0x7fffd0194db0, reason=VIR_DOMAIN_SHUTOFF_CRASHED,
    asyncJob=QEMU_ASYNC_JOB_NONE, flags=0)
   at qemu/qemu_process.c:5877
6  0x00007fffdf1f711c in processMonitorEOFEvent
   (driver=0x7fffd00f3a60, vm=0x7fffd0194db0) at qemu/qemu_driver.c:4545
7  0x00007fffdf1f7313 in qemuProcessEventHandler
   (data=0x555555832710, opaque=0x7fffd00f3a60) at qemu/qemu_driver.c:4589
8  0x00007ffff72a84c4 in virThreadPoolWorker
   (opaque=0x555555805da0) at util/virthreadpool.c:167

Thread 1 (Thread 0x7ffff7fb1880 (LWP 494472)):
1  0x00007ffff72a7898 in virCondWait
   (c=0x7fffd01c21f8, m=0x7fffd01c21a0) at util/virthread.c:154
2  0x00007ffff72a8a22 in virThreadPoolFree
   (pool=0x7fffd01c2160) at util/virthreadpool.c:290
3  0x00007fffdf1edd44 in qemuStateCleanup ()
   at qemu/qemu_driver.c:1102
4  0x00007ffff736570a in virStateCleanup ()
   at libvirt.c:807
5  0x000055555556f991 in main (argc=1, argv=0x7fffffffe458) at libvirtd.c:1660

It's funny, but Routed network name was incorrect. We should use
host-routed instead.

Recently, libprlsdk got a separate flag PNA_BRIDGE corresponding to
type=bridge libvirt network interfaces. Let's use it and get rid of
all workarounds previously added to  support it.
Signed-off-by: NMaxim Nestratov <mnestratov@virtuozzo.com>

We don't support cpu pinning for TCG domains because QEMU runs them in
one thread only.  But vcpupin command was able to set them, which
resulted in a failed startup, so make sure that doesn't happen.
Signed-off-by: NChen Hanxiao <chenhanxiao@gmail.com>

When starting a new domain, we allocate the USB addresses and keep
an address cache in the domain object's private data.

However this data is lost on libvirtd restart.

Also generate the address cache if all the addresses have been
specified, so that devices hotplugged after libvirtd restart
also get theirs assigned.

https://bugzilla.redhat.com/show_bug.cgi?id=1387666

Return 0 instead of 1, so that qemuDomainAttachChrDevice does not
assume the address neeeds to be released on error.

No functional change, since qemuDomainReleaseDeviceAddress has been a noop
for virtio serial addresses since the address cache was removed
in commit 19a148b7.

For domains with no USB address cache, we should not attempt
to generate a USB address.

https://bugzilla.redhat.com/show_bug.cgi?id=1387665

This function should never need a cleanup section.

This time do not require an address cache as a parameter.

Simplify qemuDomainAttachChrDeviceAssignAddr to not generate
the virtio serial address cache for devices of other types.

Partially reverts commit 925fa4b9.