Another vircgroup helper to avoid code repetition between
the LXC and QEMU driver.
Signed-off-by: NDaniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

lxcDomainSetMemoryParameters() and qemuDomainSetMemoryParameters()
has duplicated chunks of code that can be put in a new
helper.
Signed-off-by: NDaniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

This new helper avoids more code repetition inside
lxcDomainSetBlkioParameters() and qemuDomainSetBlkioParameters().
Signed-off-by: NDaniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

After the introduction of virDomainDriverMergeBlkioDevice() in a
previous patch, it is now clear that lxcDomainSetBlkioParameters() and
qemuDomainSetBlkioParameters() uses the same loop to set cgroup
blkio parameter of a domain.

Avoid the repetition by adding a new helper called
virDomainCgroupSetupDomainBlkioParameters().
Signed-off-by: NDaniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

lxcDomainParseBlkioDeviceStr() and qemuDomainParseBlkioDeviceStr()
are the same function. Avoid code repetition by putting the code
in a new helper.
Signed-off-by: NDaniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

lxcDomainMergeBlkioDevice() and qemuDomainMergeBlkioDevice()
are the same functions. This duplicated code can't be put in
the existing domain_cgroup.c since it's not cgroup related.

This patch introduces a new src/hypervisor/domain_driver.c to
host this more generic code that can be shared between virt
drivers. This new file is then used to create a new helper
called virDomainDeivceMergeBlkioDevice() to eliminate the code
repetition mentioned above. Callers in LXC and QEMU files
were updated.

This change is a preliminary step for more code reduction of
cgroup related code inside lxcDomainSetBlkioParameters() and
qemuDomainSetBlkioParameters().
Signed-off-by: NDaniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

qemuSetupCgroupVcpuBW() and lxcSetVcpuBWLive() shares the
same code to set CPU CFS period and quota. This code can be
moved to a new virCgroupSetupCpuPeriodQuota() helper to
avoid code repetition.

A similar code is also executed in virLXCCgroupSetupCpuTune(),
but without the rollback on error. Use the new helper in this
function as well since the 'period' rollback, if not a
straight improvement for virLXCCgroupSetupCpuTune(), is
benign. And we end up cutting more code repetition.
Signed-off-by: NDaniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

The code that calls virCgroupSetCpuShares() and virCgroupGetCpuShares()
is repeated in 4 different places. Let's put it in a new
virCgroupSetupCpuShares() to avoid code repetition.

There's a reason of why we execute a Get in the same value we
just executed Set, explained in detail by commit 97814d8a.
Let's add a gist of the reasoning behind it as a comment in
this new function as well.
Signed-off-by: NDaniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

The code from qemuSetupCgroupCpusetCpus() and virLXCCgroupSetupCpusetTune()
can be centralized in a new helper called virCgroupSetupCpusetCpus().
Signed-off-by: NDaniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

virLXCCgroupSetupMemTune() and qemuSetupMemoryCgroup() shares
duplicated code that can be put in a new helper to avoid
code repetition.
Signed-off-by: NDaniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

There is duplicated code between virt drivers that needs to
be moved to avoid code repetition. In the case of duplicated
code between lxc_cgroup.c and qemu_cgroup.c a common place
would be utils/vircgroup.c. The problem is that this would
introduce /conf related definitions that shouldn't be imported
to vircgroup.c, which is supposed to be a place for utilitary
cgroups functions only. And syntax-check would forbid it anyway
due to cross-directory includes being used.

An alternative would be to overload domain_conf.c, which already
contains all the definitions required. But that file is already
crowded with XML handling code and we wouldn't do any favors to
it by putting more utilitary, non-XML parsing/formatting code
there.

In [1], Cole suggested a 'domain_cgroup' file to host common code
between lxc_cgroup and qemu_cgroup, and Daniel suggested a
'src/hypervisor' dir to host these type of files. This patch
introduces src/hypervisor/domain_cgroup.c and, to get started,
introduces a new virDomainCgroupSetupBlkio() function to host shared
code between virLXCCgroupSetupBlkioTune() and qemuSetupBlkioCgroup().

[1] https://www.redhat.com/archives/libvir-list/2019-December/msg00817.htmlSigned-off-by: NDaniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Previous patch moved all duplicated code that were setting
and getting BlkioDevice parameters to vircgroup.c. We can
turn them into static and spare a few symbols in
libvirt_private.syms.
Signed-off-by: NDaniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

There are code repetition of set() and get() blkio device
parameters across lxc and qemu files. Use the new vircgroup
helpers to trim the repetition a bit.
Signed-off-by: NDaniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

The current use of the functions that set and get
BlkioDevice attributes is doing a set(), followed by
a get() of the same parameter right after. This is done
because there is no guarantee that the kernel will accept
the desired value given by the set() call, thus we need to
execute a get() right after to get the actual value.

This patch adds helpers inside vircgroup.c to execute these
operations. Next patch will use these helpers to reduce
code repetition in LXC and QEMU files.
Signed-off-by: NDaniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

The inc.am Makfiles are included by src/Makefile.am.
Adjust the paths added to OPENRC_INIT_FILES_IN
accordingly.
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Fixes: f4b1c020

These are missing files for OpenRC.
Signed-off-by: NRyan Moeller <ryan@iXsystems.com>
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

The current documentation is fairly terse and not easy to decode
for someone who's not intimately familiar with the inner workings
of timer devices. Expand on it by providing a somewhat verbose
description of what behavior each policy will result in, as seen
from both the guest OS and host point of view.

This is lifted directly from QEMU commit

  commit 2a7d957596786404c4ed16b089273de95a9580ad
  Author: Andrea Bolognani <abologna@redhat.com>
  Date:   Tue Feb 11 19:37:44 2020 +0100

    qapi: Expand documentation for LostTickPolicy

  v4.2.0-1442-g2a7d957596

The original text also matched word for word the documentation
found in QEMU.
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

The variable is allocated, but never freed.

==119642== 29 bytes in 1 blocks are definitely lost in loss record 409 of 671
==119642==    at 0x483579F: malloc (vg_replace_malloc.c:309)
==119642==    by 0x5AB075F: __vasprintf_internal (in /lib64/libc-2.29.so)
==119642==    by 0x57C1A28: g_vasprintf (in /usr/lib64/libglib-2.0.so.0.6000.7)
==119642==    by 0x579A0CC: g_strdup_vprintf (in /usr/lib64/libglib-2.0.so.0.6000.7)
==119642==    by 0x4AE6D58: vir_g_strdup_printf (glibcompat.c:197)
==119642==    by 0x136EEE: qemuTestParseCapabilitiesArch (testutilsqemu.c:291)
==119642==    by 0x138506: testQemuInfoSetArgs (testutilsqemu.c:763)
==119642==    by 0x135FFF: mymain (qemuxml2argvtest.c:3093)
==119642==    by 0x13A60E: virTestMain (testutils.c:839)
==119642==    by 0x1368C2: main (qemuxml2argvtest.c:3121)

Fixes: 42b3e5b9Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

The persistent alias name @persistent is allocated in
virDomainNetDefParseXML() but never freed.

==119642== 22 bytes in 2 blocks are definitely lost in loss record 178 of 671
==119642==    at 0x483579F: malloc (vg_replace_malloc.c:309)
==119642==    by 0x58F89F1: xmlStrndup (in /usr/lib64/libxml2.so.2.9.9)
==119642==    by 0x4BA3B74: virXMLPropString (virxml.c:520)
==119642==    by 0x4BDB0C5: virDomainNetDefParseXML (domain_conf.c:11876)
==119642==    by 0x4BF9EF4: virDomainDefParseXML (domain_conf.c:21196)
==119642==    by 0x4BFCD5B: virDomainDefParseNode (domain_conf.c:21943)
==119642==    by 0x4BFCC36: virDomainDefParse (domain_conf.c:21901)
==119642==    by 0x4BFCCCB: virDomainDefParseFile (domain_conf.c:21924)
==119642==    by 0x114A9D: testCompareXMLToArgv (qemuxml2argvtest.c:452)
==119642==    by 0x13894F: virTestRun (testutils.c:143)
==119642==    by 0x11F46E: mymain (qemuxml2argvtest.c:1316)
==119642==    by 0x13A60E: virTestMain (testutils.c:839

Fixes: fb0509d0Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

The privateData object is allocated in virDomainFSDefNew() but
never unref'd.

==119642== 480 bytes in 20 blocks are definitely lost in loss record 656 of 671
==119642==    at 0x4837B86: calloc (vg_replace_malloc.c:762)
==119642==    by 0x57806A0: g_malloc0 (in /usr/lib64/libglib-2.0.so.0.6000.7)
==119642==    by 0x4AE7392: virAllocVar (viralloc.c:331)
==119642==    by 0x4B64395: virObjectNew (virobject.c:241)
==119642==    by 0x48F1464: qemuDomainFSPrivateNew (qemu_domain.c:1427)
==119642==    by 0x4BBF004: virDomainFSDefNew (domain_conf.c:2307)
==119642==    by 0x4BD859A: virDomainFSDefParseXML (domain_conf.c:11217)
==119642==    by 0x4BF9DD1: virDomainDefParseXML (domain_conf.c:21179)
==119642==    by 0x4BFCD5B: virDomainDefParseNode (domain_conf.c:21943)
==119642==    by 0x4BFCC36: virDomainDefParse (domain_conf.c:21901)
==119642==    by 0x4BFCCCB: virDomainDefParseFile (domain_conf.c:21924)
==119642==    by 0x114A9D: testCompareXMLToArgv (qemuxml2argvtest.c:452)

Fixes: 5120577eSigned-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Signed-off-by: NCollin Walling <walling@linux.ibm.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

Signed-off-by: NCollin Walling <walling@linux.ibm.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

There are some architectures that support capabilities that others
do not (e.g. s390x supports cpu comparison and baseline via QEMU).

Let's make testQEMUSchemaLoad accept a string to specify the schema
to load based on the specified arch.
Signed-off-by: NCollin Walling <walling@linux.ibm.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

Signed-off-by: NLaine Stump <laine@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

During the hypervisor-agnostic validation of network devices, verify
that the interface type is either "network" or "bridge", and that if
there is any <virtualport>, that it doesn't have any type associated
with it.

This needs to be done both for the parse-time validation and for
runtime validation (after a port has been acquired from any associated
network), because an interface with type='network' could have an
actual type at runtime of "hostdev" or "direct", neither of which
support isolated='true' (yet). Likewise, if an interface is
type='network', then at runtime a <virtualport> with a type that
doesn't support isolated='yes' (e.g. "openvswitch", "802.1Qbh" -
currently *none* of the available virtualport types support it)
Signed-off-by: NLaine Stump <laine@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

This setting can be updating very easily on an already active
interface by just changing it in sysfs. If the bridge used for
connection is also changed, there is no need to separately update it,
because the new setting isf done as a part of connecting to the bridge
anyway.
Signed-off-by: NLaine Stump <laine@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

This patch pushes the isolatedPort setting from the <interface> down
all the way to the callers of virNetDevBridgeAddPort(), and sets
BR_ISOLATED on the port (using virNetDevBridgePortSetIsolated()) after
the port has been successfully added to the bridge.
Signed-off-by: NLaine Stump <laine@redhat.com>
Signed-off-by: NLaine Stump <laine@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Similar to the way that the <vlan>, <bandwidth>, and <virtualport>
elements and the trustGuestRxFilters attribute in a <network> (or in
the appropriate <portgroup> element of a <network> can be applied to a
port when it is allocated for a domain's network interface, this patch
checks for a configured value of <port isolated="yes|no"/> in
either the domain <interface> or in the network, setting isolatedPort
in the <networkport> to the first one it finds (the setting from the
domain's <interface> is preferred). This, in turn, is passed back to
the domain when a port is allocated, so that the domain will use that
setting.

(One difference from <vlan>, <bandwidth>, <virtualport>, and
trustGuestRxFilters, is that all of those can be set in a <portgroup>
so that they can be applied only to a subset of interfaces connected
to the network. This didn't really make sense for the isolated setting
due to the way that it's implemented in Linux - the BR_ISOLATED flag
will prevent traffic from passing between two ports that both have
BR_ISOLATED set, but traffic can still go between those ports and
other ports that *don't* have BR_ISOLATED. (It would be nice if all
traffic from a BR_ISOLATED port could be blocked except traffic going
to/from a designated egress port or ports, but instead the entire
feature is implemented as a single flag. Because of this, it's really
only useful if all the ports on a network are isolated, so setting it
for a subset has no practical utility.)
Signed-off-by: NLaine Stump <laine@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

This is a very simple thing to parse and format, but needs to be done
in 4 places, so two trivial utility functions have been made that can
be called from all the higher level parser/formatters:

  <domain><interface>
  <domain><interface><actual> (only in domain status)
  <network>
  <networkport>
Signed-off-by: NLaine Stump <laine@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

When this flag is set for an interface attached to a bridge, traffic
to/from the specified interface can only enter/exit the bridge via
another attached interface that *doesn't* have the BR_ISOLATED flag
set. This can be used to permit guests to communicate with the rest of
the network, but not with each other.
Signed-off-by: NLaine Stump <laine@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Not only was the original error code destroyed in the case of
encountering an error during recovery from a failed attach to the
bridge (and then *that* error was destroyed by logging a *second*
error about the failure to recover - virNetDevBridgeAddPort() already
logs an error, so the one about failing to recover was redundant), but
if the recovery was successful, the function would then return success
to the caller even though it had failed.

Fixes: 2711ac87
(overwritten errors were introduced along with this functionality)
Fixes: 6bde0a1a
(the wrong return value was introduced by a refactor)
Signed-off-by: NLaine Stump <laine@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

This is in the data structure and the parse/format functions, and is
getting passed all around correctly, it just was omitted from the RNG,
which hasn't been noticed because no human is creating <networkport>
XML, and so it's never getting validated against the schema.
Signed-off-by: NLaine Stump <laine@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Signed-off-by: NLaine Stump <laine@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

We specify "true" as the fail-action for LIBVIRT_CHECK_PKG.

This was used when we had a fallback to non-pkg-config detection,
then removed in commit 5bdcef13
later re-introduced in commit dc3d2c9f
and then left in when removing the old detection again in
commit 18981877

Remove it to properly error out when libxl was requested but not
detected.
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Fixes: 18981877Reviewed-by: NAndrea Bolognani <abologna@redhat.com>

Firstly, the check for disk I/O error can be moved into 'if
(!offline)' section a few lines below.
Secondly, checks for vmstate and slirp should be moved under the
same section because they reflect live state of a domain. For
offline migration no QEMU is involved and thus these restrictions
are not valid.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

In two places where virPidFileForceCleanupPath() is called, we
try to unlink() the pidfile again. This is needless because
virPidFileForceCleanupPath() has done just that.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

The virPidFileReadPath() function is supposed to return 0 on
success or a negative value on failure. But the negative value
has a special meaning - it's negated errno. Therefore, when
converting string to int we shouldn't return -1 which translates
to EPERM. Returning EINVAL looks closer to the truth.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

There's nothing to clean up. Make it obvious what is returned.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>

Extract the code that directly deals with storage. This allows further
simplification and clarification of virStorageFileGetMetadataRecurse.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>

Replacing virHashLookup by virHashHasEntry allows us to use NULL as the
payload of the hash table rather than putting a fake '1' pointer into
the table.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>