- 03 9月, 2011 5 次提交
-
-
由 Eric Blake 提交于
Just as leaving managed save metadata behind can cause problems when creating a new domain that happens to collide with the name of the just-deleted domain, the same is true of leaving any snapshot metadata behind. For safety sake, extend the semantic change of commit b26a9fa9 to also cover snapshot metadata as a reason to reject undefining an inactive domain. A future patch will make sure that shutdown of a transient domain automatically deletes snapshot metadata (whether by destroy, shutdown, or guest-initiated action). Management apps of transient domains should take care to capture xml of snapshots, if it is necessary to recreate the snapshot metadata on a later transient domain with the same name and uuid. This also documents a new flag that hypervisors can choose to support as a shortcut for taking care of the metadata as part of the undefine process; however, nontrivial driver support for these flags will be deferred to future patches. Note that ESX and VBox can never be transient; therefore, they do not have to worry about automatic cleanup after shutdown (the persistent domain still remains); likewise they never store snapshot metadata, so the undefine flag is trivial. The nontrivial work remaining is thus in the qemu driver. * include/libvirt/libvirt.h.in (VIR_DOMAIN_UNDEFINE_SNAPSHOTS_METADATA): New flag. * src/libvirt.c (virDomainUndefine, virDomainUndefineFlags): Document new limitations and flag. * src/esx/esx_driver.c (esxDomainUndefineFlags): Trivial implementation. * src/vbox/vbox_tmpl.c (vboxDomainUndefineFlags): Likewise. * src/qemu/qemu_driver.c (qemuDomainUndefineFlags): Enforce the limitations.
-
由 Eric Blake 提交于
The first two flags are essential for being able to replicate snapshot hierarchies across multiple hosts, which will come in handy for supervised migrations. It also allows a management app to take a snapshot of a transient domain, save the metadata, stop the domain, recreate a new transient domain by the same name, redefine the snapshot, then revert to it. This is not quite as convenient as leaving the metadata behind after a domain is no longer around, but doing that has a few problems: 1. the libvirt API can only delete snapshot metadata if there is a valid domain handle to use to get to that snapshot object - if stale data is left behind without a domain, there is no way to request that the data be cleaned up. 2. creating a new domain with the same name but different uuid than the older domain where a snapshot existed cannot use the older snapshot data; this risks confusing libvirt, and forbidding the stale data is similar to the recent patch to forbid stale managed save. The first two flags might be useful on hypervisors with no metadata, but only for modifying the notion of the current snapshot; however, I don't know how to do that for ESX or VBox. The third flag is a convenience option, to combine a creation with a delete metadata into one step. It is trivial for hypervisors with no metadata. The qemu changes will be involved enough to warrant a separate patch. * include/libvirt/libvirt.h.in (VIR_DOMAIN_SNAPSHOT_CREATE_REDEFINE) (VIR_DOMAIN_SNAPSHOT_CREATE_CURRENT) (VIR_DOMAIN_SNAPSHOT_CREATE_NO_METADATA): New flags. * src/libvirt.c (virDomainSnapshotCreateXML): Document them, and enforce mutual exclusion. * src/esx/esx_driver.c (esxDomainSnapshotCreateXML): Trivial implementation. * src/vbox/vbox_tmpl.c (vboxDomainSnapshotCreateXML): Likewise. * docs/formatsnapshot.html.in: Document re-creation.
-
由 Eric Blake 提交于
To make it easier to know when undefine will fail because of existing snapshot metadata, we need to know how many snapshots have metadata. Also, it is handy to filter the list of snapshots to just those that have no parents; document that flag now, but implement it in later patches. * include/libvirt/libvirt.h.in (VIR_DOMAIN_SNAPSHOT_LIST_ROOTS) (VIR_DOMAIN_SNAPSHOT_LIST_METADATA): New flags. * src/libvirt.c (virDomainSnapshotNum) (virDomainSnapshotListNames): Document them. * src/esx/esx_driver.c (esxDomainSnapshotNum) (esxDomainSnapshotListNames): Implement trivial flag. * src/vbox/vbox_tmpl.c (vboxDomainSnapshotNum) (vboxDomainSnapshotListNames): Likewise. * src/qemu/qemu_driver.c (qemuDomainSnapshotNum) (qemuDomainSnapshotListNames): Likewise.
-
由 Eric Blake 提交于
A future patch will make it impossible to remove a domain if it would leave behind any libvirt-tracked metadata about snapshots, since stale metadata interferes with a new domain by the same name. But requiring snaphot contents to be deleted before removing a domain is harsh; with qemu, qemu-img can still make use of the contents after the libvirt domain is gone. Therefore, we need an option to get rid of libvirt tracking information, but not the actual contents. For hypervisors that do not track any metadata in libvirt, the implementation is trivial; all remaining hypervisors (really, just qemu) will be dealt with separately. * include/libvirt/libvirt.h.in (VIR_DOMAIN_SNAPSHOT_DELETE_METADATA_ONLY): New flag. * src/libvirt.c (virDomainSnapshotDelete): Document it. * src/esx/esx_driver.c (esxDomainSnapshotDelete): Trivially supported when there is no libvirt metadata. * src/vbox/vbox_tmpl.c (vboxDomainSnapshotDelete): Likewise.
-
由 Eric Blake 提交于
While it is nice that snapshots and saved images remember whether the domain was running or paused, sometimes the restoration phase wants to guarantee a particular state (paused to allow hot-plugging, or running without needing to call resume). This introduces new flags to allow the control, and a later patch will implement the flags for qemu. * include/libvirt/libvirt.h.in (VIR_DOMAIN_SAVE_RUNNING) (VIR_DOMAIN_SAVE_PAUSED, VIR_DOMAIN_SNAPSHOT_REVERT_RUNNING) (VIR_DOMAIN_SNAPSHOT_REVERT_PAUSED): New flags. * src/libvirt.c (virDomainSaveFlags, virDomainRestoreFlags) (virDomainManagedSave, virDomainSaveImageDefineXML) (virDomainRevertToSnapshot): Document their use, and enforce mutual exclusion.
-
- 02 9月, 2011 3 次提交
-
-
由 Osier Yang 提交于
This patch adds the ability to make the filesystem for a filesystem pool during a pool build. The patch adds two new flags, no overwrite and overwrite, to control when mkfs gets executed. By default, the patch preserves the current behavior, i.e., if no flags are specified, pool build on a filesystem pool only makes the directory on which the filesystem will be mounted. If the no overwrite flag is specified, the target device is checked to determine if a filesystem of the type specified in the pool is present. If a filesystem of that type is already present, mkfs is not executed and the build call returns an error. Otherwise, mkfs is executed and any data present on the device is overwritten. If the overwrite flag is specified, mkfs is always executed, and any existing data on the target device is overwritten unconditionally.
-
由 Osier Yang 提交于
There is a goto before "conn" is initialized.
-
由 Jim Fehlig 提交于
Includes impl of python binding since the generator was not able to cope. Note: Requires gendispatch.pl patch from Matthias Bolte https://www.redhat.com/archives/libvir-list/2011-August/msg01367.html
-
- 31 8月, 2011 1 次提交
-
-
由 Eric Blake 提交于
There is no reason to forbid pausing an autodestroy domain (not to mention that 'virsh start --paused --autodestroy' succeeds in creating a paused autodestroy domain). Meanwhile, qemu was failing to enforce the API documentation that autodestroy domains cannot be saved. And while the original documentation only mentioned save/restore, snapshots are another form of saving that are close enough in semantics as to make no sense on one-shot domains. * src/qemu/qemu_driver.c (qemudDomainSuspend): Drop bogus check. (qemuDomainSaveInternal, qemuDomainSnapshotCreateXML): Forbid saves of autodestroy domains. * src/libvirt.c (virDomainCreateWithFlags, virDomainCreateXML): Document snapshot interaction.
-
- 30 8月, 2011 1 次提交
-
-
由 Eric Blake 提交于
There have been several instances of people having problems with a broken managed save file, and not aware that they could use 'virsh managedsave-remove dom' to fix things. Making it possible to do this as part of starting a domain makes the same functionality easier to find, and one less API call. * include/libvirt/libvirt.h.in (VIR_DOMAIN_START_FORCE_BOOT): New flag. * src/libvirt.c (virDomainCreateWithFlags): Document it. * src/qemu/qemu_driver.c (qemuDomainObjStart): Alter signature. (qemuAutostartDomain, qemuDomainStartWithFlags): Update callers. * tools/virsh.c (cmdStart): Expose it in virsh. * tools/virsh.pod (start): Document it.
-
- 27 8月, 2011 1 次提交
-
-
由 Eric Blake 提交于
* docs/drvqemu.html.in: Fix typo. * src/libvirt.c (virDomainCreateXML, virDomainCreateWithFlags): Likewise.
-
- 26 8月, 2011 4 次提交
-
-
由 Matthias Bolte 提交于
-
由 Jiri Denemark 提交于
When virStreamAbort is called on a stream that has not been used yet, quite confusing error is returned: "this function is not supported by the connection driver". Let's just ignore such streams as there's nothing to abort anyway.
-
由 Jiri Denemark 提交于
If migration failed on source daemon, the migration is automatically canceled by the daemon itself. Thus we don't need to call virDomainMigrateConfirm3(cancelled=1). Calling it doesn't cause any harm but the resulting error message printed in logs may confuse people.
-
由 Alex Jia 提交于
* src/qemu/qemu_migration.c: avoid dead 'ret' assignment and silence clang warning. Detected by ccc-analyzer: libvirt.c:4277:5: warning: Value stored to 'ret' is never read ret = domain->conn->driver->domainMigrateConfirm3 ^ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
- 25 8月, 2011 1 次提交
-
-
由 Michal Privoznik 提交于
My previous patch 74c75671 introduced a regression by removing TLS initialization from client.
-
- 24 8月, 2011 1 次提交
-
-
由 Eric Blake 提交于
I was testing a virsh patch, and wanted to see if I had passed the flags I thought. But with LIBVIRT_DEBUG in the environment, I just saw: 14:24:52.359: 15022: debug : virDomainSnapshotNum:15586 : dom=0xc9c180, (VM: name=rhel_6-64, uuid=48f8e8e7-e14f-0e14-02f0-ce71997bdcab), including a trailing space. This fixes the issues. * src/libvirt.c: Log flag parameters, even if currently unused. (VIR_DOMAIN_DEBUG_0): Drop trailing comma in log. (VIR_DOMAIN_DEBUG_1): Split guts into... (VIR_DOMAIN_DEBUG_2): ...new macro.
-
- 11 8月, 2011 1 次提交
-
-
由 Eric Blake 提交于
Transient domains reject attempts to set autostart, and using virDomainCreate to restart a domain only works on persistent domains. Therefore, managed save makes no sense on transient domains, and should be rejected up front rather than creating an otherwise unrecoverable managed save file. Besides, transient domains imply that a lot more management is being done by the upper layer; this includes the assumption that the upper layer is okay managing the saved state file created by virDomainSave, and does not need to use managed save. * src/libvirt.c: Document that transient domains are incompatible with managed save. * src/qemu/qemu_driver.c (qemuDomainManagedSave): Enforce it. * src/libxl/libxl_driver.c (libxlDomainManagedSave): Likewise.
-
- 03 8月, 2011 1 次提交
-
-
由 Eric Blake 提交于
src/libvirt.c: "may requires" is confusing; the s was extra.
-
- 28 7月, 2011 2 次提交
-
-
由 Michal Privoznik 提交于
Because we do support flags for virDomainSetBlkioParameters and virDomainGetBlkioParameters, update appropriate description as well.
-
由 Alex Jia 提交于
* tools/virsh.c: avoid memory leak in cmdVolPath. * src/libvirt.c: Add doc for virStorageVolGetPath to tell one must free() the returned path after use. * how to reproduce? % dd if=/dev/zero of=/var/lib/libvirt/images/foo.img count=1 bs=10M % virsh pool-refresh default % valgrind -v --leak-check=full virsh vol-path --vol \ /var/lib/libvirt/images/foo.img * actual results: Detected in valgrind run: ==16436== 32 bytes in 1 blocks are definitely lost in loss record 7 of 22 ==16436== at 0x4A05FDE: malloc (vg_replace_malloc.c:236) ==16436== by 0x386A314B3D: xdr_string (in /lib64/libc-2.12.so) ==16436== by 0x3DF8CD770D: xdr_remote_nonnull_string (remote_protocol.c:3 ==16436== by 0x3DF8CD7EC8: xdr_remote_storage_vol_get_path_ret % virsh pool-refresh default % valgrind -v --leak-check=full virsh vol-path --vol \ /var/lib/libvirt/images/foo.img Signed-off-by: NAlex Jia <ajia@redhat.com>
-
- 27 7月, 2011 1 次提交
-
-
由 Jiri Denemark 提交于
Make MIGRATION_OUT use the new helper methods. This also introduces new protection to migration v3 process: the migration job is held from Begin to Confirm to avoid changes to a domain during migration (esp. between Begin and Perform phases). This change is automatically applied to p2p and tunneled migrations. For normal migration, this requires support from a client. In other words, if an old (pre 0.9.4) client starts normal migration of a domain, the domain will not be protected against changes between Begin and Perform steps.
-
- 26 7月, 2011 1 次提交
-
-
由 Eric Blake 提交于
Now that virDomainSetVcpusFlags knows about VIR_DOMAIN_AFFECT_CURRENT, so should virDomainGetVcpusFlags. Unfortunately, the virsh counterpart 'virsh vcpucount' has already commandeered --current for a different meaning, so teaching virsh to expose this in the next patch will require a bit of care. * src/libvirt.c (virDomainGetVcpusFlags): Allow VIR_DOMAIN_AFFECT_CURRENT. * src/libxl/libxl_driver.c (libxlDomainGetVcpusFlags): Likewise. * src/qemu/qemu_driver.c (qemudDomainGetVcpusFlags): Likewise. * src/test/test_driver.c (testDomainGetVcpusFlags): Likewise. * src/xen/xen_driver.c (xenUnifiedDomainGetVcpusFlags): Likewise.
-
- 22 7月, 2011 4 次提交
-
-
由 Adam Litke 提交于
* src/libvirt.c: implement the main entry points
-
由 Eric Blake 提交于
Modifying the xml on either save or restore only gets you so far - you have to remember to 'virsh dumpxml dom' just prior to the 'virsh save' in order to have an xml file worth modifying that won't be rejected due to abi breaks. To make this more powerful, we need a way to grab the xml embedded within a state file, and from there, it's not much harder to also support modifying a state file in-place. Also, virDomainGetXMLDesc didn't document its flags. * include/libvirt/libvirt.h.in (virDomainSaveImageGetXMLDesc) (virDomainSaveImageDefineXML): New prototypes. * src/libvirt.c (virDomainSaveImageGetXMLDesc) (virDomainSaveImageDefineXML): New API. * src/libvirt_public.syms: Export them. * src/driver.h (virDrvDomainSaveImageGetXMLDesc) (virDrvDomainSaveImgeDefineXML): New driver callbacks.
-
由 Michal Privoznik 提交于
This introduces new API virDomainDestroyFlags to allow domain destroying with flags, as the existing API virDomainDestroy misses flags. The set of flags is defined in virDomainDestroyFlagsValues enum, which is currently commented, because it is empty. Calling this API with no flags set (@flags == 0) is equivalent calling virDomainDestroy.
-
由 Eric Blake 提交于
In order to choose whether to use O_DIRECT when saving a domain image to a file, we need a new flag. But virDomainSave was implemented before our policy of all new APIs having a flag argument. Likewise for virDomainRestore when restoring from a file. The new flag name is chosen as CACHE_BYPASS so as not to preclude a future solution that uses posix_fadvise once the Linux kernel has a smarter implementation of that interface. * include/libvirt/libvirt.h.in (virDomainCreateFlags) (virDomainCoreDumpFlags): Add a flag. (virDomainSaveFlags, virDomainRestoreFlags): New prototypes. * src/libvirt.c (virDomainSaveFlags, virDomainRestoreFlags): New API. * src/libvirt_public.syms: Export them. * src/driver.h (virDrvDomainSaveFlags, virDrvDomainRestoreFlags): New driver callbacks.
-
- 21 7月, 2011 1 次提交
-
-
由 Eric Blake 提交于
* src/conf/domain_event.c (virDomainEventDispatch): Fix typo. * src/internal.h (ATTRIBUTE_FMT_PRINTF): Likewise. * src/libvirt.c (virStreamEventUpdateCallback): Likewise. * src/remote/remote_driver.c (doRemoteOpen): Likewise. * src/storage/storage_backend_fs.c (virStorageBackendProbeTarget): Likewise. * src/util/virterror.c (virConnCopyLastError, virCopyLastError): Likewise. * src/xen/xend_internal.h (xend_wait_for_devices): Likewise.
-
- 20 7月, 2011 1 次提交
-
-
由 Osier Yang 提交于
This introduces a new API virDomainUndefineFlags to control the domain undefine process, as the existing API virDomainUndefine doesn't support flags. Currently only flag VIR_DOMAIN_UNDEFINE_MANAGED_SAVE is supported. If the domain has a managed save image, including VIR_DOMAIN_UNDEFINE_MANAGED_SAVE in @flags will also remove that file, and omitting the flag will cause undefine process to fail. This patch also changes the behavior of virDomainUndefine, if the domain has a managed save image, the undefine will be refused.
-
- 19 7月, 2011 1 次提交
-
-
由 Eric Blake 提交于
There were two API in driver.c that were silently masking flags bits prior to calling out to the drivers, and several others that were explicitly masking flags bits. This is not forward-compatible - if we ever have that many flags in the future, then talking to an old server that masks out the flags would be indistinguishable from talking to a new server that can honor the flag. In general, libvirt.c should forward _all_ flags on to drivers, and only the drivers should reject unknown flags. In the case of virDrvSecretGetValue, the solution is to separate the internal driver callback function to have two parameters instead of one, with only one parameter affected by the public API. In the case of virDomainGetXMLDesc, it turns out that no one was ever mixing VIR_DOMAIN_XML_INTERNAL_STATUS with the dumpxml path in the first place; that internal flag was only used in saving and restoring state files, which happened to be in functions internal to a single file, so there is no mixing of the internal flag with a public flags argument. Additionally, virDomainMemoryStats passed a flags argument over RPC, but not to the driver. * src/driver.h (VIR_DOMAIN_XML_FLAGS_MASK) (VIR_SECRET_GET_VALUE_FLAGS_MASK): Delete. (virDrvSecretGetValue): Separate out internal flags. (virDrvDomainMemoryStats): Provide missing flags argument. * src/driver.c (verify): Drop unused check. * src/conf/domain_conf.h (virDomainObjParseFile): Delete declaration. (virDomainXMLInternalFlags): Move... * src/conf/domain_conf.c: ...here. Delete redundant include. (virDomainObjParseFile): Make static. * src/libvirt.c (virDomainGetXMLDesc, virSecretGetValue): Update clients. (virDomainMemoryPeek, virInterfaceGetXMLDesc) (virDomainMemoryStats, virDomainBlockPeek, virNetworkGetXMLDesc) (virStoragePoolGetXMLDesc, virStorageVolGetXMLDesc) (virNodeNumOfDevices, virNodeListDevices, virNWFilterGetXMLDesc): Don't mask unknown flags. * src/interface/netcf_driver.c (interfaceGetXMLDesc): Reject unknown flags. * src/secret/secret_driver.c (secretGetValue): Update clients. * src/remote/remote_driver.c (remoteSecretGetValue) (remoteDomainMemoryStats): Likewise. * src/qemu/qemu_process.c (qemuProcessGetVolumeQcowPassphrase): Likewise. * src/qemu/qemu_driver.c (qemudDomainMemoryStats): Likewise. * daemon/remote.c (remoteDispatchDomainMemoryStats): Likewise.
-
- 16 7月, 2011 1 次提交
-
-
由 Eric Blake 提交于
Commit 13555416 introduced a nice feature without documenting it. * src/libvirt.c (virDomainMigrate2): Add paragraph.
-
- 15 7月, 2011 1 次提交
-
-
由 Taku Izumi 提交于
This patch extends virDomainSetVcpusFlags API to support VIR_DOMAIN_AFFECT_CURRENT flag. Now because most APIs accept VIR_DOMAIN_AFFECT_CURRENT flags, virDomainSetVcpusFlags API should also do. Signed-off-by: NTaku Izumi <izumi.taku@jp.fujitsu.com>
-
- 08 7月, 2011 2 次提交
-
-
由 Eric Blake 提交于
Most APIs use 'unsigned int flags'; but a few stragglers were using a signed value. In particular, the vir*GetXMLDesc APIs were split-brain, with inconsistent choice of types. Although it is an API break to use 'int' instead of 'unsigned int', it is ABI compatible (pre-compiled apps will have no difference in behavior), and generally apps can be recompiled without any issue (only rare apps that compiled with extremely high warning levels, or which pass libvirt API around as typed function pointers, would have to make any code changes to deal with the change). The migrate APIs use 'unsigned long flags', which can't be changed, due to ABI constraints. This patch intentionally touches only the public API, to prove the claim that most existing code (including driver callbacks and virsh) still compiles just fine in spite of the type change. * include/libvirt/libvirt.h.in (virConnectOpenAuth) (virDomainCoreDump, virDomainGetXMLDesc, virNetworkGetXMLDesc) (virNWFilterGetXMLDesc): Use unsigned int for flags. (virDomainHasCurrentSnapshot): Use consistent spelling. * src/libvirt.c (virConnectOpenAuth, virDomainCoreDump) (virDomainGetXMLDesc, virNetworkGetXMLDesc) (virNWFilterGetXMLDesc, do_open): Update accordingly.
-
由 Eric Blake 提交于
Debugging decimal flags is a pain. * src/libvirt.c: Always print flags in hex.
-
- 28 6月, 2011 1 次提交
-
-
由 Matthias Bolte 提交于
-
- 27 6月, 2011 1 次提交
-
-
由 Eric Blake 提交于
We already have a public virDomainPinVcpu, which implies that Pin and Vcpu are treated as separate words. Unreleased commit e261987c introduced virDomainGetVcpupinInfo as the first public API that used Vcpupin, although we had prior internal uses of that spelling. For consistency, change the spelling to be two words everywhere, regardless of whether pin comes first or last. * daemon/remote.c: Treat vcpu and pin as separate words. * include/libvirt/libvirt.h.in: Likewise. * src/conf/domain_conf.c: Likewise. * src/conf/domain_conf.h: Likewise. * src/driver.h: Likewise. * src/libvirt.c: Likewise. * src/libvirt_private.syms: Likewise. * src/libvirt_public.syms: Likewise. * src/libxl/libxl_driver.c: Likewise. * src/qemu/qemu_driver.c: Likewise. * src/remote/remote_driver.c: Likewise. * src/xen/xend_internal.c: Likewise. * tools/virsh.c: Likewise. * src/remote/remote_protocol.x: Likewise. * src/remote_protocol-structs: Likewise. Suggested by Matthias Bolte.
-
- 25 6月, 2011 2 次提交
-
-
由 Taku Izumi 提交于
This patch introduces a new libvirt API (virDomainGetVcpupinInfo), as a counterpart to virDomainPinVcpuFlags. We can use virDomainGetVcpus API to retrieve CPU affinity information, but can't use this API against inactive domains (at least in case of KVM), as it lacks a flags parameter. The usual thing is to add a new virDomainGetVcpusFlags, but that API name is already occupied by the counterpart to virDomainGetMaxVcpus, which has a completely different signature. The virDomainGetVcpupinInfo is the new API to retrieve CPU affinity information of active and inactive domains. While the usual convention is to list an array before its length, this API violates that rule in order to be more like virDomainGetVcpus (where maxinfo was doing double-duty as the length of two different arrays). Signed-off-by: NTaku Izumi <izumi.taku@jp.fujitsu.com>
-
由 Eric Blake 提交于
Integer overflow and remote code are never a nice mix. This has existed since commit 56cd4140. * src/libvirt.c (virDomainGetVcpus): Reject overflow up front. * src/remote/remote_driver.c (remoteDomainGetVcpus): Avoid overflow on sending rpc. * daemon/remote.c (remoteDispatchDomainGetVcpus): Avoid overflow on receiving rpc.
-
- 24 6月, 2011 2 次提交
-
-
由 Eric Blake 提交于
When adding virDomainGetVcpusFlags in commit ea3f5c68, I did enough rebasing that the doc comments in libvirt.c no longer matched the final chosen enum names in libvirt.h. And now we've gone ahead and deprecated the names VIR_DOMAIN_VCPU_{LIVE,CONFIG}. * src/libvirt.c (virDomainGetVcpusFlags): Fix comment.
-
由 Eric Blake 提交于
This reverts commit 6419f596.
-