Move the function to qemu_domain.c and export them for further use.

Now that there are only two elements in the enum, let's change it to a
bool and rename the function similarly to the one added in previous
commit.

Introduce qemuDomainDiskChainElementRevoke that revokes the access
rather than having a flag to do so.

The function has terrible semantics. Split it into two functions.

qemu won't ever add those functions directly to QMP. They will be
replaced with 'blockdev-add' and 'blockdev-del' eventually. At this time
there's no need to keep the stubs around.

Additionally the drive_del stub in JSON contained dead code in the
attempt to report errors. (VIR_ERR_OPERATION_UNSUPPORTED was never
reported). Since the text impl does have the same message it is reported
anyways.

Functions no longer required for attaching SCSI disks since
QEMU_CAPS_DEVICE is expected.

We've started to assume support for QEMU_CAPS_DEVICE. Doing so in the
SCSI disk hotplug code allows us to drop a lot of ugly legacy code.

This patch extend domstats command to match extended
virDomainListGetStats API in previous patch.
Signed-off-by: NQiaowei Ren <qiaowei.ren@intel.com>
Message-id: 1459171833-26416-9-git-send-email-qiaowei.ren@intel.com

This patch add new perf command to enable/disable perf event
for a guest domain.
Signed-off-by: NQiaowei Ren <qiaowei.ren@intel.com>
Message-id: 1459171833-26416-8-git-send-email-qiaowei.ren@intel.com

When libvirtd daemon restart, this patch will reenable those perf
events previously enabled.
Signed-off-by: NQiaowei Ren <qiaowei.ren@intel.com>
Message-id: 1459171833-26416-7-git-send-email-qiaowei.ren@intel.com

This patch adds new xml element, and so we can have the option of
also having perf events enabled immediately at startup.
Signed-off-by: NQiaowei Ren <qiaowei.ren@intel.com>
Message-id: 1459171833-26416-6-git-send-email-qiaowei.ren@intel.com

This patch implement the internal driver API for perf event into
qemu driver.
Signed-off-by: NQiaowei Ren <qiaowei.ren@intel.com>
Message-id: 1459171833-26416-5-git-send-email-qiaowei.ren@intel.com

This patch implement a set of interfaces for perf event. Based on
these interfaces, we can implement internal driver API for perf,
and get the results of perf conuter you care about.
Signed-off-by: NQiaowei Ren <qiaowei.ren@intel.com>
Message-id: 1459171833-26416-4-git-send-email-qiaowei.ren@intel.com

Add remote support for perf event.
Signed-off-by: NQiaowei Ren <qiaowei.ren@intel.com>
Message-id: 1459171833-26416-3-git-send-email-qiaowei.ren@intel.com

API agreed on in
https://www.redhat.com/archives/libvir-list/2015-October/msg00872.html

* include/libvirt/libvirt-domain.h (virDomainGetPerfEvents,
virDomainSetPerfEvents): New declarations.
* src/libvirt_public.syms: Export new symbols.
* src/driver-hypervisor.h (virDrvDomainGetPerfEvents,
virDrvDomainSetPerfEvents): New typedefs.
* src/libvirt-domain.c: Implement virDomainGetPerfEvents and
virDomainSetPerfEvents.
Signed-off-by: NQiaowei Ren <qiaowei.ren@intel.com>
Message-id: 1459171833-26416-2-git-send-email-qiaowei.ren@intel.com

While we have a wiki page describing the feature [1] since the
feature is distributed in our .tar.gz we ought to document it. So
I went ahead, copied the wiki page and reformatted so it fits our
docs coding style.

1: http://wiki.libvirt.org/page/NSS_moduleSigned-off-by: NMichal Privoznik <mprivozn@redhat.com>

If the pool creation thread happens to detect the luns in
the scsi target, the size parameters will be calculated as
part of the refreshPool called from storagePoolCreate().

This means the virStoragePoolFCRefreshThread (commit id
'512b8747') waiting to run and "refresh" the pool will
essentially double the allocation and capacity values.
A separate refresh would correct the values.

To avoid this, the FCRefreshThread needs to reinitialize
the pool size values prior to calling virStorageBackendSCSIFindLUs
which eventually calls virStorageBackendSCSINewLun and
updates the size values for each volume found.

After the recent commits the build didn't work for me. Fix it by
using size_t as the callback argument is using and the correct
formatter. The attempted fixup to use %llu as a formatter was wrong.

Commit e6336442 changed the 'out:' label to 'cleanup'  in
libxlDomainAttachNetDevice(), but missed a comment referencing
the 'out:' label. Remove it from the comment since it is no
longer accurate anyhow.

Use virGetLastErrorMessage() rather than open code it

- remove top padding for h1. this means page titles sit flush with the top
  of the side bar (like 'The virtualization API' on the front page)
- up the top padding for the remaining sections. makes it visually easier
  to tell adjacent header sections apart, especially in dense wiki pages
- use two different spacing levels for h2-h4 and h5-h6,
  gives pages some more visual flexibility
- use a slightly lower bottom padding... this makes top padding stick out
  more which makes it visually easier to differentiate between adjacent
  header sections

In order to follow recent comments which indicate support for specific
feature bits are supported by a specific QEMU version add the version
from whence the relaxed, vapic, and spinlocks support was added.

This patch adds support for "vpindex", "runtime", "synic",
"stimer", and "vendor_id" features available in qemu 2.5+.

- When Hyper-V "vpindex" is on, guest can use MSR HV_X64_MSR_VP_INDEX
to get virtual processor ID.

- Hyper-V "runtime" enlightement feature allows to use MSR
HV_X64_MSR_VP_RUNTIME to get the time the virtual processor consumes
running guest code, as well as the time the hypervisor spends running
code on behalf of that guest.

- Hyper-V "synic" stands for Synthetic Interrupt Controller, which is
lapic extension controlled via MSRs.

- Hyper-V "stimer" switches on Hyper-V SynIC timers MSR's support.
Guest can setup and use fired by host events (SynIC interrupt and
appropriate timer expiration message) as guest clock events

- Hyper-V "reset" allows guest to reset VM.

- Hyper-V "vendor_id" exposes hypervisor vendor id to guest.
Signed-off-by: NNikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

1. All hyperv features are tristate ones. So make tristate generating part common.
2. Reduce nesting on spinlocks.
Signed-off-by: NNikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

1. All hyperv features are tristate ones. So make tristate parsing code common.
2. Reindent switch statement.
3. Reduce nesting in spinlocks parsing.
Signed-off-by: NNikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

After the patches that added tracking of in-use macvtap names (commit
370608, first appearing in libvirt-1.3.2), if the function to allocate
a new macvtap device came to a device name created outside libvirt, it
would retry the same device name MACVLAN_MAX_ID (8191) times before
finally giving up in failure.

The problem was that virBitmapNextClearBit was always being called
with "0" rather than the value most recently checked (which would
increment each time through the loop), so it would always return the
same id (since we dutifully release that id after failing to create a
new device using it).

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1321546Signed-off-by: NLaine Stump <laine@laine.org>

For those VF allocated from a network pool, we need to set its backend
to be VIR_DOMAIN_HOSTDEV_PCI_BACKEND_XEN so that later work can be
correct.
Signed-off-by: NChunyan Liu <cyliu@suse.com>

This test was commited 4 years ago, but was never enabled in
storagepoolxml2xmltest.c. This patch reactivates it, conditionnaly on RBD
storage support being enabled

This test failed for two reasons:
* The uuid was missing from the input file
* The output file had the <name> in a different place from the actual output

This reverts commit bb5f2dc9.

The "if (vol->target.format != VIR_STORAGE_FILE_RAW)" check in the
createVol backend. This check is bogus because virStorageVolDefParseXML()
in conf/storage_conf.c sets target.format only if volOptions in
virStoragePoolTypeInfo has formatFromString set, and that's not the
case the zfs backend.

So the check always fails and breaks volume creation.

This reverts commit 6682d621.

The "if (vol->target.format != VIR_STORAGE_FILE_RAW)" check in the
createVol backend. This check is bogus because virStorageVolDefParseXML()
in conf/storage_conf.c sets target.format only if volOptions in
virStoragePoolTypeInfo has formatFromString set, and that's not the
case the logical backend.

So the check always fails and breaks volume creation.

When hostdev parent is network device, should call
libxlDomainDetachNetDevice to detach the device from a higher level.
Signed-off-by: NChunyan Liu <cyliu@suse.com>

Adjust codes to make it cleaner.
Signed-off-by: NChunyan Liu <cyliu@suse.com>

When AttachNetDevice failed, should call networkReleaseActualDevice
to release actual device, and if actual device is hostdev, should
remove the hostdev from vm->def->hostdevs.
Signed-off-by: NChunyan Liu <cyliu@suse.com>

networkStartNetwork() and networkShutdownNetwork() were calling the
wrong type-specific function in the case of networks that were
configured for macvtap ("direct") bridge mode - they were instead
calling the functions for a tap+bridge network. Currently none of
these functions does anything (they just return 0) so it hasn't
created any problems, but that could change in the future.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1316465

An attempt to simplify the code for the VIR_NETWORK_FORWARD_BRIDGE
case of networkUpdateState in commit b61db335 (first in release
1.2.14) resulted in networks based on macvtap bridge mode being
erroneously marked as inactive any time libvirtd was restarted.

The problem is that the original code had differentiated between a
network using tap devices to connect to an existing host-bridge device
(forward mode of VIR_NETWORK_FORWARD_BRIDGE and a non-NULL
def->bridge), and one using macvtap bridge mode to connect to any
ethernet device (still forward mode VIR_NETWORK_FORWARD_BRIDGE, but
null def->bridge), but the changed code assumed that all networks with
VIR_NETWORK_FORWARD_BRIDGE were tap + host-bridge networks, so a null
def->bridge was interpreted as "inactive".

This patch restores the original code in networkUpdateState

This changes __VIT_TEST_UTILS_H__ to __VIR_TEST_UTILS_H__

%zu is for size_t variables, not uint64 ones. This causes a warning when building on
a 32 bit linux.