Implement support for passing custom command line arguments
to bhyve using the 'bhyve:commandline' element:

  <bhyve:commandline>
    <bhyve:arg value='-newarg'/>
  </bhyve:commandline>

 * Define virDomainXMLNamespace for the bhyve driver, which
   at this point supports only the 'commandline' element
   described above,
 * Update command generation code to inject these command line
   arguments between driver-generated arguments and the vmname
   positional argument.
Signed-off-by: NRoman Bogorodskiy <bogorodskiy@gmail.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

A couple places in the docs didn't get updated when the forward mode
"open" was added.
Signed-off-by: NLaine Stump <laine@laine.org>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>

networkMigrateStateFiles was added nearly 5 years ago when the network
state directory was moved from /var/lib/libvirt to /var/run/libvirt
just prior to libvirt-1.2.4). It was only required to maintain proper
state information for networks that were active during an upgrade that
didn't involve rebooting the host. At this point the likelyhood of
anyone upgrading their libvirt from pre-1.2.4 directly to 5.0.0 or
later *without rebooting the host* is probably so close to 0 that no
properly informed bookie would take *any* odds on it happening, so it
seems appropriate to remove this pointless code.
Signed-off-by: NLaine Stump <laine@laine.org>
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>

Upcoming patches need an array of strings for use in QMP
block-dirty-bitmap-merge.  A convenience wrapper cuts down
on the verbosity of creating the array, similar to the
existing virJSONValueObjectAppendString().
Signed-off-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

A function that returns -1 for multiple possible failures, but only
raises a libvirt error for some of those failures, can be hard to
use correctly. Yet both of our JSON object/array appenders fall in
that pattern.  True, the silent errors represent coding bugs that
none of the callers should ever trigger, while the noisy errors
represent memory failures that can happen anywhere, so we happened
to never end up failing without an error. But it is better to
either use the _QUIET memory allocation variants, and make callers
decide to report failure; or make all failure paths noisy. This
patch takes the latter approach.
Signed-off-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Strictly speaking, this should go near vshCompleter typedef
declaration. However, I find it more useful near actual completer
implementations.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Now that the nested loop is gone.
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NCole Robinson <crobinso@redhat.com>

Use qemuBuildControllersCommandLine since it builds the command line
for (nearly) all controllers, not just one.
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NCole Robinson <crobinso@redhat.com>

section
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NCole Robinson <crobinso@redhat.com>

Since they go on the USB bus, format them after USB hubs.

https://bugzilla.redhat.com/show_bug.cgi?id=1375402Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NCole Robinson <crobinso@redhat.com>

Now that the inner loop does not require any other variables,
it can be easily separated. Apart from reducing the indentation
level this will allow it to be called from different code paths.
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NCole Robinson <crobinso@redhat.com>

Now that it's no longer needed, remove the argument.
This removes the last helper variable in
qemuBuildControllerDevCommandLine.
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NCole Robinson <crobinso@redhat.com>

qemuBuildLegacyUSBControllerCommandLine is the only place where
we need to count the USB controllers.

Count them again instead of keeping track in a variable passed to
qemuBuildControllerDevStr.

This removes the need for another variable in the loop in
qemuBuildControllerDevCommandLine.
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NCole Robinson <crobinso@redhat.com>

Count them in qemuBuildLegacyUSBControllerCommandLine to remove
yet another variable accessed from the loop in
qemuBuildControllerDevCommandLine.
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NCole Robinson <crobinso@redhat.com>

Shorten some long conditions.
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NCole Robinson <crobinso@redhat.com>

This removes the need to mark it in the 'usbcontroller' variable.
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NCole Robinson <crobinso@redhat.com>

Move out the code formatting "-usb" on the QEMU command line.
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NCole Robinson <crobinso@redhat.com>

Similar to what commit 86dba8f3 did for virPortAllocatorRelease,
ignore port 0 in virPortAllocatorSetUsed.

For all the reasonable use cases the callers already check that
the port is non-zero, however if the port from the XML overflows
unsigned short and turns into 0, it can be set as used by
virPortAllocatorSetUsed but not released by virPortAllocatorRelease.

Also skip port '0' in virPortAllocatorSetUsed to make this behavior
symmetric.

The serenity was disturbed by commit 5dbda5e9 which started using
virPortAllocatorRelease instead of virPortAllocatorSetUsed (false).

https://bugzilla.redhat.com/show_bug.cgi?id=1591645Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NCole Robinson <crobinso@redhat.com>

There is no "GNU Lesser General Public License, version 2",
only version 2.1 and later. In "version 2", the license was
still called "Library" instead of "Lesser". So assume that
version 2.1 is meant here.
Signed-off-by: NThomas Huth <thuth@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>
Signed-off-by: NJán Tomko <jtomko@redhat.com>

The tools/virt-xml-validate.in file is licensed under the terms of
the GPL, but then says "You should have received a copy of the
GNU *Lesser* General Public License". Thus scratch the "Lesser" here.
Signed-off-by: NThomas Huth <thuth@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>
Signed-off-by: NJán Tomko <jtomko@redhat.com>

The bootstrap.conf is licensed under the terms of the LGPL, but then
suggests to "See the GNU General Public License for more details".
That should be the "GNU Lesser General Public License" instead, of
course.
Signed-off-by: NThomas Huth <thuth@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>
Signed-off-by: NJán Tomko <jtomko@redhat.com>

Switch qemuBuildVirtioDevStr to use virDomainDeviceSetData: callers
pass in the virDomainDeviceType and the void * DefPtr. This will
save us from having to repeatedly extend the function argument
list in subsequent patches.
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>
Signed-off-by: NCole Robinson <crobinso@redhat.com>

This is essentially a wrapper for easily setting the variable
name in virDomainDeviceDef that matches its associated
VIR_DOMAIN_DEVICE_TYPE.
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>
Signed-off-by: NCole Robinson <crobinso@redhat.com>

Current code essentially duplicates the same logic, but misses
some cases (like vhost-vsock-device).
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>
Signed-off-by: NCole Robinson <crobinso@redhat.com>

The vhost-scsi device string should depend on the requested
address type, not strictly on the emulated arch. This is the
same logic used by qemuBuildVirtioDevStr, and this particular
path is already tested in the hostdev-scsi-vhost-scsi-ccw tests
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>
Signed-off-by: NCole Robinson <crobinso@redhat.com>

Move the rng->model == VIRTIO check to parse time. This also
allows us to remove similar checks throughout the qemu driver
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>
Signed-off-by: NCole Robinson <crobinso@redhat.com>

If we validate that memballoon is NONE|VIRTIO at parse time,
we can drop similar checks elsewhere in the qemu driver
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>
Signed-off-by: NCole Robinson <crobinso@redhat.com>

This will be extended in the future, so let's simplify things by
centralizing the checks.
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>
Signed-off-by: NCole Robinson <crobinso@redhat.com>

So later code can more easily access def->model
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>
Signed-off-by: NCole Robinson <crobinso@redhat.com>

Found that it was missing in formatstorage and had a few typos
in the storage driver page.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
Reviewed-by: NCole Robinson <crobinso@redhat.com>

If the two sysfs_path are both NULL, there may be an incorrect
object returned for virNodeDeviceObjListFindBySysfsPath().

This check exists in old interface virNodeDeviceFindBySysfsPath().
e.g.
virNodeDeviceFindBySysfsPath(virNodeDeviceObjListPtr devs,
                             const char *sysfs_path)
{
    ...
        if ((devs->objs[i]->def->sysfs_path != NULL) &&
            (STREQ(devs->objs[i]->def->sysfs_path, sysfs_path))) {
    ...
}
Reviewed-by: NCole Robinson <crobinso@redhat.com>
Signed-off-by: NCheng Lin <cheng.lin130@zte.com.cn>

 13 bytes in 1 blocks are definitely lost in loss record 44 of 179
    at 0x4C2EE6F: malloc (vg_replace_malloc.c:299)
    by 0x9514A69: strdup (in /lib64/libc-2.27.so)
    by 0x5E60C0B: virStrdup (virstring.c:956)
    by 0x54C856F: virHostGetDRMRenderNode (qemuxml2argvmock.c:190)
    by 0x57CB4E3: qemuProcessGraphicsSetupRenderNode (qemu_process.c:4860)
    by 0x57CB571: qemuProcessSetupGraphics (qemu_process.c:4881)
    by 0x57CE01B: qemuProcessPrepareDomain (qemu_process.c:6040)
    by 0x57D102E: qemuProcessCreatePretendCmd (qemu_process.c:6975)
    by 0x114C1C: testCompareXMLToArgv (qemuxml2argvtest.c:611)
    by 0x134B90: virTestRun (testutils.c:174)
    by 0x123478: mymain (qemuxml2argvtest.c:1697)
    by 0x136BFA: virTestMain (testutils.c:1112)
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NErik Skultety <eskultet@redhat.com>

This partially reverts 00dc991c.

 2,030 (1,456 direct, 574 indirect) bytes in 14 blocks are definitely lost in loss record 77 of 80
    at 0x4C30E96: calloc (vg_replace_malloc.c:711)
    by 0x50F83AA: virAlloc (viralloc.c:143)
    by 0x5178DFA: virPCIDeviceNew (virpci.c:1753)
    by 0x51753E9: virPCIDeviceIterDevices (virpci.c:468)
    by 0x5175EB5: virPCIDeviceGetParent (virpci.c:759)
    by 0x517AB55: virPCIDeviceIsBehindSwitchLackingACS (virpci.c:2476)
    by 0x517AC24: virPCIDeviceIsAssignable (virpci.c:2494)
    by 0x10BF27: testVirPCIDeviceIsAssignable (virpcitest.c:229)
    by 0x10D14C: virTestRun (testutils.c:174)
    by 0x10C535: mymain (virpcitest.c:422)
    by 0x10F1B6: virTestMain (testutils.c:1112)
    by 0x10CF93: main (virpcitest.c:455)
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NErik Skultety <eskultet@redhat.com>

This is a return argument that is to be compared against NULL on
successful return. However, it is not initialized and therefore
relies on callers setting it to NULL prior calling the function.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NErik Skultety <eskultet@redhat.com>

Asserting the value we set four lines earlier in qemuBlockjobState
doesn't buy us any safety (if the public header adds a value, we end
up skipping that value without the compiler warning us of our gap);
what we really want is to assert that the value auto-assigned by the
compiler matches the actual last value in the public headers (as was
done below for qemuBlockJobType).  Add useful comments while at it.
Signed-off-by: NEric Blake <eblake@redhat.com>
ACKed-by: NPeter Krempa <pkrempa@redhat.com>

Signed-off-by: NJim Fehlig <jfehlig@suse.com>

Upstream apparmor is switching to named profiles. In short,

/usr/sbin/dnsmasq {

becomes

profile dnsmasq /usr/sbin/dnsmasq {

Consequently, any profiles that reference profiles in a peer= condition
need to be updated if the referenced profile switches to a named profile.
Apparmor commit 9ab45d81 switched dnsmasq to a named profile. ATM it is
the only named profile switch that has affected libvirt. Add rules to the
libvirtd profile to reference dnsmasq in peer= conditions by profile name.
Signed-off-by: NJim Fehlig <jfehlig@suse.com>

The libxl driver does not set the new memory value in the active domain def
after a successful balloon. This results in the old memory value in
<currentMemory>. E.g.

virsh dumpxml test | grep currentMemory
  <currentMemory unit='KiB'>20971520</currentMemory>
virsh setmem test 16777216 --live
virsh dumpxml test | grep currentMemory
  <currentMemory unit='KiB'>20971520</currentMemory>

Set the new memory value in active domain def after a successful call to
libxl_set_memory_target().
Signed-off-by: NJim Fehlig <jfehlig@suse.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Hanlde all the possible failure codes as per ACPI standard documented in
the function header.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1660410Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

We forgot to document the specific fields for the 0x103 and 0x200
sources which are tied to device removal and device hotplug
respectively.

The value description is based on the ACPI 6.2A standard Table 6-207 and
Table 6-208. At the time of writing of this patch the standard can be
accessed e.g. at:

https://www.uefi.org/sites/default/files/resources/ACPI%206_2_A_Sept29.pdfSigned-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>