Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

The correct vlanid range is 0~4095.

After merging this patch, we can not validate a interface xml with vlanid >= 4096.
[root@localhost ~]# cat vlan.xml
<interface type='vlan' name='eno1.4096'>
   <start mode='onboot'/>
   <protocol family='ipv4'>
    <dhcp/>
   </protocol>
   <vlan tag='4096'>
     <interface name='eno1'/>
   </vlan>
</interface>
[root@localhost ~]# virt-xml-validate vlan.xml
vlan.xml:1: element interface: Relax-NG validity error : Invalid sequence in interleave
vlan.xml:6: element vlan: Relax-NG validity error : Element interface failed to validate content
vlan.xml:6: element vlan: Relax-NG validity error : Element vlan failed to validate attributes
vlan.xml fails to validate
[root@localhost ~]#

Here is a ip command help on this.
[root@localhost /]# ip link add link eno1 name eno1.90 type vlan help
Usage: ... vlan [ protocol VLANPROTO ] id VLANID                [ FLAG-LIST ]
                [ ingress-qos-map QOS-MAP ] [ egress-qos-map QOS-MAP ]

VLANPROTO: [ 802.1Q / 802.1ad ]
VLANID := 0-4095
FLAG-LIST := [ FLAG-LIST ] FLAG
FLAG := [ reorder_hdr { on | off } ] [ gvrp { on | off } ] [ mvrp { on | off } ]
        [ loose_binding { on | off } ]
QOS-MAP := [ QOS-MAP ] QOS-MAPPING
QOS-MAPPING := FROM:TO

The gid value passed to devpts has to be translated by hand as
virLXCControllerSetupDevPTS() is called before setting up the user
and group mappings.
Otherwise devpts will use an unmapped gid and openpty()
will fail within containers.
Linux kernel commit 23adbe12
("fs,userns: Change inode_capable to capable_wrt_inode_uidgid")
uncovered that issue.
Signed-off-by: NRichard Weinberger <richard@nod.at>
Signed-off-by: NJán Tomko <jtomko@redhat.com>

   Should like below:
    <interface type='server'>
      <mac address='52:54:00:22:c9:42'/>
      <source address='192.168.0.1' port='5558'/>
    </interface>
    ...
    <interface type='client'>
      <mac address='52:54:00:8b:c9:51'/>
      <source address='192.168.0.1' port='5558'/>
    </interface>

During a QEMU live migration several warning messages about job
handling could be written to syslog on the destination host:

"entering monitor without asking for a nested job is dangerous"

The messages are written because the job handling during migration
uses hard coded asyncJob values in several places that are incorrect.

This patch passes the required asyncJob value around and prevents
the warnings as well as any issues that the warnings may be referring
to.

https://bugzilla.redhat.com/show_bug.cgi?id=1130089Signed-off-by: NSam Bobroff <sam.bobroff@au1.ibm.com>
Signed-off-by: NJán Tomko <jtomko@redhat.com>

Perl is necessary to our build processing, it will invoke a lot of
generating script, like: gendispatch.pl. If perl is missing, it's
ok for build from git checkout, because autogen.sh will tell you.
But for compiling from a release tarball, configure will just record
a missing message, and continue, then build failed, like:
https://www.redhat.com/archives/libvirt-users/2014-August/msg00050.html

So need to enhance configure script to handle this negative case.
Reported-by: NHongbin Lu <hongbin@savinetwork.ca>
Signed-off-by: NJincheng Miao <jmiao@redhat.com>
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

commit d9504941 introduces two new attributes "cmd_per_lun" and
"max_sectors" same with the names QEMU uses for virtio-scsi.
But the case of parsing them is not exact. Change to parse
them if controller has "driver" element.
Signed-off-by: NMo yuxiang <moyuxiang@huawei.com>

This patch changes the setmaxmem function to support the '--live',
'--config', and '--current' flags by revectoring the code through
the setmem function using the VIR_DOMAIN_MEM_MAXIMUM flag. The
setmem code is refactored to handle both cases depending on the flag.

The changed maxmem code for the MEM_MAXIMUM path will not allow
modification to the memory values of an active guest unless the --config
switch is used.
Signed-off-by: NChen Hanxiao <chenhanxiao@cn.fujitsu.com>

Libvirt is really chatty when the DEBUG log level is enabled. When a
host uses journald we'd enable debug logging to journald when only
specifying the debug log level. As journald may employ rate throttling
this would lock up the daemon until it's able to flush all debug
messages.

This patch changes the default log level to VIR_LOG_INFO when using the
default (unconfigured) log output to journald.

To still allow debug logging to journald the user now has to explicitly
specify journald as a log output with priority 1 in the "log_outputs"
configuration option. This patch also changes the config file template
to be explicit about this change and notify the user about the possible
consequence of debug logging into journald.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1121955

Our docs didn't mention the explicit option to log into journald.

Laine Stump noted on IRC that syntax check wasn't flagging his
typo of 'i= 0'.  This fixes it.

* build-aux/bracket-spacing.pl: Tighten 'space around =' rule.
* src/storage/storage_backend.c
(virStorageBackendCreateExecCommand): Fix offenders.
* src/util/virnuma.c (virNumaGetDistances): Likewise.
* src/vbox/vbox_tmpl.c (vboxDomainSnapshotDeleteMetadataOnly)
(vboxNetworkGetXMLDesc): Likewise.
* src/xenapi/xenapi_driver.c (xenapiDomainLookupByName):
Likewise.
Signed-off-by: NEric Blake <eblake@redhat.com>

If we failed to create BHYVE_STATE_DIR, we should show this
path, not BHYVE_LOG_DIR.

At the beginning of the qemu config file parsing function there
are 3 helper macros defined: GET_VALUE_BOOL, GET_VALUE_LONG and
GET_VALUE_STR. Later, when they are no longer needed they are
undefined in order to keep the namespace clean. However, the
GET_VALUE_STRING is undefined instead of GET_VALUE_STR.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Implement ZFS storage backend driver. Currently supported
only on FreeBSD because of ZFS limitations on Linux.

Features supported:

 - pool-start, pool-stop
 - pool-info
 - vol-list
 - vol-create / vol-delete

Pool definition looks like that:

 <pool type='zfs'>
  <name>myzfspool</name>
  <source>
    <name>actualpoolname</name>
  </source>
 </pool>

The 'actualpoolname' value is a name of the pool on the system,
such as shown by 'zpool list' command. Target makes no sense
here because volumes path is always /dev/zvol/$poolname/$volname.

User has to create a pool on his own, this driver doesn't
support pool creation currently.

A volume could be used with Qemu by adding an entry like this:

    <disk type='volume' device='disk'>
      <driver name='qemu' type='raw'/>
      <source pool='myzfspool' volume='vol5'/>
      <target dev='hdc' bus='ide'/>
    </disk>

In qemuMigrationToFile we enter the monitor multiple times and don't
check if the VM is still alive after returning form the monitor. Add the
checks to skip pieces of code in case the VM crashes while saving it's
state.

Saving a shutoff VM doesn't make sense and libvirtd crashes while
attempting to do that. Check that the domain is alive after entering
the save async job.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1129207

Fix header alignment and remove the unused conn parameter.

Resolves https://bugzilla.redhat.com/show_bug.cgi?id=1121837

https://bugzilla.redhat.com/show_bug.cgi?id=1128751

There's this <driver/> element under <interface/> which can have
several attributes. However, the driver element is currently formated
only if the driver's name or txmode has been specified. This makes
only a little sense as we parse even partial <driver/>, for instance:

    <interface type='user'>
      <mac address='52:54:00:e5:48:58'/>
      <model type='virtio'/>
      <driver ioeventfd='on' event_idx='on' queues='5'/>
    </interface>

But such XML would never get formatted back.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Commit 4cf53158 tried to set up unique labels per disk in the
example, but ended up choosing strings that don't correspond
to the usual choice of bus types.  Tweak the strings once again.

* docs/formatdomain.html.in: Use preferred names.
Signed-off-by: NEric Blake <eblake@redhat.com>

When a network is defined with "<pf dev='xyz'/>", libvirt will query
sysfs to learn the list of all virtual functions (VF) associated with
that Physical Function (PF) then populate the network's interface pool
accordingly. This action was previously done only when the first guest
actually requested an interface from the network. This patch changes
it to populate the pool immediately when the network is started. This
way any problems with the PF or its VFs will become apparent sooner.

Note that we can't remove the old calls to networkCreateInterfacePool
that happen whenever a guest requests an interface - doing so would be
asking for failures on hosts that had libvirt upgraded with a network
that had been started but not yet used.

This resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1047818

networkCreateInterfacePool was a bit loose in its error cleanup, which
could result in a network definition with interfaces in the pool that
were NULL. This would in turn lead to a libvirtd crash when a guest
tried to attach an interface using the network with that pool.

In particular this would happen when creating a pool to be used for
macvtap connections. macvtap needs the netdev name of the virtual
function in order to use it, and each VF only has a netdev name if it
is currently bound to a network driver. If one of the VFs of a PF
happened to be bound to the pci-stub or vfio-pci driver (indicating
it's already in use for PCI passthrough), or no driver at all, it
would have no name. In this case networkCreateInterfacePool would
return an error, but would leave the netdef->forward.nifs set to the
total number of VFs in the PF. The interface attach that triggered
calling of networkCreateInterfacePool (it uses a "lazy fill" strategy)
would simply fail, but the very next attempt to attach an interface
using the same network pool would result in a crash.

This patch refactors networkCreateInterfacePool to bring it more in
line with current coding practices (label name, use of a switch with
no default case) as well as providing the following two changes to
behavior:

1) If a VF with no netdev name is encountered, just log a warning and
continue; only fail if exactly 0 devices are found to put in the pool.

2) If the function fails, clean up any partial interface pool and set
netdef->forward.nifs to 0.

This resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1111455

This tries to address

    https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=688778

were libvirt autodetected vbox:///session and it wasn't listed in the
manpage.

Otherwise we fail like

  libvirt version: 1.2.7, package: 6 (root 2014-08-08-16:09:22 bogon)
  virAuditOpen:62 : Unable to initialize audit layer: Protocol not supported
  virFileGetDefaultHugepageSize:2958 : internal error: Unable to parse /proc/meminfo
  virStateInitialize:749 : Initialization of QEMU state driver failed: internal error: Unable to parse /proc/meminfo
  daemonRunStateInit:922 : Driver state initialization failed

if the data can't be determined.

Reference: http://bugs.debian.org/757609

This fixes compilation on kFreeBSD which otherwise fails like

  CC       util/libvirt_util_la-virprocess.lo
In file included from /usr/include/sys/cpuset.h:35:0,
                 from util/virprocess.c:43:
/usr/include/sys/_cpuset.h:49:43: error: 'NBBY' undeclared here (not in
a function)
  long __bits[howmany(CPU_SETSIZE, _NCPUBITS)];
                                           ^
In file included from util/virprocess.c:43:0:
/usr/include/sys/cpuset.h:215:12: error: unknown type name 'cpusetid_t'
 int cpuset(cpusetid_t *);
            ^
/usr/include/sys/cpuset.h:216:30: error: expected ')' before 'id_t'
 int cpuset_setid(cpuwhich_t, id_t, cpusetid_t);
                              ^
/usr/include/sys/cpuset.h:217:42: error: expected ')' before 'id_t'
 int cpuset_getid(cpulevel_t, cpuwhich_t, id_t, cpusetid_t *);
                                          ^
/usr/include/sys/cpuset.h:218:48: error: expected ')' before 'id_t'
 int cpuset_getaffinity(cpulevel_t, cpuwhich_t, id_t, size_t, cpuset_t
*);
                                                ^
/usr/include/sys/cpuset.h:219:48: error: expected ')' before 'id_t'
 int cpuset_setaffinity(cpulevel_t, cpuwhich_t, id_t, size_t, const
cpuset_t *);

And it's the correct usage as documented in

  http://www.freebsd.org/cgi/man.cgi?query=cpuset_setid

Also change the #ifdef HAVE_BSH_CPU_AFFINITY to #if for consistency.

A command to freeze a part of mounted file systems is implemented in
upstream QEMU-guest-agent with a name of 'guest-fsfreeze-freeze-list'.
This fixes the name of the command used to partial fsfreeze in qemu driver
when 'mountpoints' option is specified to virDomainFSFreeze API.
Signed-off-by: NTomoki Sekiyama <tomoki.sekiyama@hds.com>

The virDomainSetInterfaceParameters implementation in qemu over
VIR_DOMAIN_AFFECT_CONFIG doesn't work as expected. When trying to
clear out the bandwidth settings for an interface, it has no
actual effect:

    virsh # domiftune --config $domain $interface
    inbound.average: 100
    inbound.peak   : 0
    inbound.burst  : 0
    outbound.average: 10
    outbound.peak  : 0
    outbound.burst : 0

    virsh domiftune --config $domain $interface 0 0

    virsh # domiftune --config $domain $interface
    inbound.average: 100
    inbound.peak   : 0
    inbound.burst  : 0
    outbound.average: 10
    outbound.peak  : 0
    outbound.burst : 0

But according to virsh man page:

    To clear inbound or outbound settings, use --inbound or
    --outbound respectfully with average value of zero.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

introduce function
  xenParseXMOS(virConfPtr conf,...........);
which parses the OS config instead
Signed-off-by: NKiarie Kahurani <davidkiarie4@gmail.com>

introduce function
   xenParseXMGeneralMeta(virConfPtr conf, .......);
which parses general metadata instead
Signed-off-by: NKiarie Kahurani <davidkiarie4@gmail.com>

introduce function
   xenParseXMEmulatedHardware(virConfPtr conf,.........);
which parses emulated devices config instead
Signed-off-by: NKiarie Kahurani <davidkiarie4@gmail.com>

introduce function
  xenParseXMVif(virConfPtr conf,........);
which parses Vfb config instead
Signed-off-by: NKiarie Kahurani <davidkiarie4@gmail.com>

introduce function
  xenParseXMCharDev(virConfPtr conf,.........);
which parses Char devices config instead
Signed-off-by: NKiarie Kahurani <davidkiarie4@gmail.com>

introduce function
 xenParseXMVfb(virConfPtr conf,..........);
which parses Vfb config instead
Signed-off-by: NKiarie Kahurani <davidkiarie4@gmail.com>

introduce function
  xenParseXMDisk(virConfPtr conf, ........);
which parses xm disk config instead
Signed-off-by: NKiarie Kahurani <davidkiarie4@gmail.com>

introduce function
  xenParseXMCPUFeatures(virConfPtr conf,.........);
which parses CPU features instead
Signed-off-by: NKiarie Kahurani <davidkiarie4@gmail.com>

introduce function
   xenParseXMPCI(virConfPtr conf, ........);
which parses PCI config instead
Signed-off-by: NKiarie Kahurani <davidkiarie4@gmail.com>

introduce function
  xenParseXMEventActions(virConfPtr conf,........)
which parses events leading to certain actions
Signed-off-by: NKiarie Kahurani <davidkiarie4@gmail.com>

introduce function
    xenParseXMTimeOffset(virConfPtr conf,.......);
which parses time offset config instead
Signed-off-by: NKiarie Kahurani <davidkiarie4@gmail.com>

introduce function
  xenParseXMMem(virConfPtr conf,.........);
which parses memory config instead
Signed-off-by: NKiarie Kahurani <davidkiarie4@gmail.com>