When libvirtd is run inside a container it is normal that neither
systemd nor pm-utils will be available. In this case there is no way to
suspend the host, so libvirt should just report the feature unsupported
instead of raising an error.
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

If libvirt receives DISCONNECTED event and prDaemonRunning is set
to false, and qemuDomainRemoveDiskDevice() is performing in the
meantime, then qemuDomainRemoveDiskDevice() will fail to remove
pr-helper object because prDaemonRunning is false. But removing
that check from qemuHotplugRemoveManagedPR() is not enough,
because after removing the object through monitor the
qemuProcessKillManagedPRDaemon() is called which contains the
same check. Thus the pr-helper process might be left behind.
Signed-off-by: NJie Wang <wangjie88@huawei.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Signed-off-by: NJonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>
Signed-off-by: NJán Tomko <jtomko@redhat.com>

Signed-off-by: NJonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>
Signed-off-by: NJán Tomko <jtomko@redhat.com>

Signed-off-by: NJonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>
Signed-off-by: NJán Tomko <jtomko@redhat.com>

Signed-off-by: NJonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>
Signed-off-by: NJán Tomko <jtomko@redhat.com>

Signed-off-by: NJonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>
Signed-off-by: NJán Tomko <jtomko@redhat.com>

Signed-off-by: NJonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>
Signed-off-by: NJán Tomko <jtomko@redhat.com>

Signed-off-by: NJonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>
Signed-off-by: NJán Tomko <jtomko@redhat.com>

Signed-off-by: NJonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>
Signed-off-by: NJán Tomko <jtomko@redhat.com>

Signed-off-by: NJonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>
Signed-off-by: NJán Tomko <jtomko@redhat.com>

Signed-off-by: NJonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>
Signed-off-by: NJán Tomko <jtomko@redhat.com>

Signed-off-by: NJonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>
Signed-off-by: NJán Tomko <jtomko@redhat.com>

Signed-off-by: NJonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>
Signed-off-by: NJán Tomko <jtomko@redhat.com>

Signed-off-by: NJonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>
Signed-off-by: NJán Tomko <jtomko@redhat.com>

Signed-off-by: NJonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>
Signed-off-by: NJán Tomko <jtomko@redhat.com>

Signed-off-by: NJonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>
Signed-off-by: NJán Tomko <jtomko@redhat.com>

Signed-off-by: NJonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>
Signed-off-by: NJán Tomko <jtomko@redhat.com>

Signed-off-by: NJonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>
Signed-off-by: NJán Tomko <jtomko@redhat.com>

Signed-off-by: NJonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>
Signed-off-by: NJán Tomko <jtomko@redhat.com>

Signed-off-by: NJonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>
Signed-off-by: NJán Tomko <jtomko@redhat.com>

Log the flags passed to the function in a exploded state so that it's
easily visible what's happening to the image.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

At this point, all test programs that use qemu_LDADDS also
use LDADDS, so we can remove a bunch of repetition by simply
including the latter in the former.
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NJim Fehlig <jfehlig@suse.com>

We optionally include QEMU and LXC support in this test and
depending on which is enabled (if either is enabled at all) we
need to link in different objects.

Right now we implicitly depend on the fact that qemu_LDADDS is
empty when QEMU is not enabled to get the correct set of objects,
but it's better to be explicit about it.
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NJim Fehlig <jfehlig@suse.com>

We want all test programs using qemu_LDADDS to also use LDADDS,
and cputest is the only existing exception.

We can't just replace GNULIB_LIBS with LDADDS though, even though
the latter is a superset of the former, because that would result
in a linking error due to including the same object twice:

  /usr/bin/ld:
  ../src/libvirt_probes.o:.../src/libvirt_probes.o.dtrace-temp.c:141:
  multiple definition of `libvirt_object_new_semaphore';
  ../src/libvirt_probes.o:.../src/libvirt_probes.o.dtrace-temp.c:141:
  first defined here

To work around this, we include both qemu_LDADDS and LDADDS when
QEMU support is enabled, and just LDADDS otherwise.
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NJim Fehlig <jfehlig@suse.com>

Since the behaviour of launch security is heavily dependent on 3rd party
vendors (e.g. AMD SEV) where the data returned can be essentially
anything, the most reasonable approach here in the test driver is not to
try return any data.
Signed-off-by: NIlias Stamatis <stamatis.iliass@gmail.com>
Reviewed-by: NErik Skultety <eskultet@redhat.com>

The hash table returned by qemuMonitorGetAllBlockJobInfo is organized by
the frontend name (which skipps the 'drive-' prefix). While our code
properly matches the jobs to the disk, qemu needs the full job name
including the 'drive-' prefix to be able to identify jobs.

Fix this by adding an argument to qemuMonitorGetAllBlockJobInfo which
does not modify the job name before filling the hash.

This fixes a regression where users would not be able to cancel/pivot
block jobs after restarting libvirtd while a blockjob is running.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

In commit 76b9aba2 I refactored how the function treats the readonly
flag which introduced a bug when we'd not allow to force read-write
state for an image.

This created problems with blockjobs where we need to temporarily
force images to have read-write permissions.

Rename QEMU_DOMAIN_STORAGE_SOURCE_ACCESS_READ_ONLY to
QEMU_DOMAIN_STORAGE_SOURCE_ACCESS_FORCE_READ_ONLY and also introduce
a complement QEMU_DOMAIN_STORAGE_SOURCE_ACCESS_FORCE_READ_WRITE which
will allow to force write access.

https://bugzilla.redhat.com/show_bug.cgi?id=1717768Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

In commit 76b9aba2 I tried to refactor qemuDomainStorageSourceAccessAllow
but used wrong operators for adding bitwise flags.

This way the flags would result in 0 if any of them would be applied.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

When specifying extra params for spcie TLS verification, it's necessary
to pass a weird URI to it. Let's add a test for this case where the TLS
string contains a space.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Determine whether the test has failed after running all the cases so
that we don't need to rerun it multiple times to see all problems.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

VIR_TEST_DEBUG can be easily made verbose in the tests.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Use VIR_TEST_VERBOSE instead. This fixes the following syntax check
problem:

tests/qemumonitorjsontest.c:1409:        virReportError(VIR_ERR_INTERNAL_ERROR, "arr should have been cleared");
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>

Signed-off-by: NIlias Stamatis <stamatis.iliass@gmail.com>
Reviewed-by: NErik Skultety <eskultet@redhat.com>

Updates the existing image stored in @path, in case @dxml contains valid
XML supported by the fake host.
Signed-off-by: NIlias Stamatis <stamatis.iliass@gmail.com>
Reviewed-by: NErik Skultety <eskultet@redhat.com>

Extracting the code logic for opening and parsing a test image from
testDomainRestoreFlags into a separate function, allows us to reuse this
code in other functions such as testDomainSaveImageGetXMLDesc.
Signed-off-by: NIlias Stamatis <stamatis.iliass@gmail.com>
Reviewed-by: NErik Skultety <eskultet@redhat.com>

Extracting the code logic for writing a test image to disk from
testDomainSaveFlags into a separate function, allows us to reuse this
code in other functions such as testDomainSaveImageDefineXML.
Signed-off-by: NIlias Stamatis <stamatis.iliass@gmail.com>
Reviewed-by: NErik Skultety <eskultet@redhat.com>

The upcoming virDomainBackup() API needs to take advantage of the
ability to expose a bitmap as part of nbd-server-add for a pull-mode
backup (this is the recently-added QEMU_CAPS_NBD_BITMAP capability).
Signed-off-by: NEric Blake <eblake@redhat.com>
Acked-by: NPeter Krempa <pkrempa@redhat.com>

The upcoming virDomainBackup() API needs to take advantage of various
qcow2 bitmap manipulations as the basis to virDomainCheckpoints and
incremental backups.  Add four functions to expose
block-dirty-bitmap-{add,enable,disable,merge} (this is the
recently-added QEMU_CAPS_BITMAP_MERGE capability).
Signed-off-by: NEric Blake <eblake@redhat.com>
Acked-by: NPeter Krempa <pkrempa@redhat.com>