* src/qemu/qemu.conf src/qemu/qemu_conf.c src/qemu/qemu_conf.h: there is
  a new config type option for mac filtering
* src/qemu/qemu_bridge_filter.[ch]: new module for the ebtable entry points
* src/qemu/qemu_driver.c: plug the MAC filtering at the right places
  in the domain life cycle
* src/Makefile.am po/POTFILES.in: add the new module

* configure.in: look for ebtables binary location if present
* src/Makefile.am: add the new module
* src/util/ebtables.[ch]: new module and internal APIs around
  the ebtables binary
* src/libvirt_private.syms: export the symbols only internally

* src/util/network.h src/util/network.c: utilities to parse network
  addresses, check netmask and compute ranges

* src/Makefile.am: add selinux CFLAGS and linker flags to security driver

* src/lxc/libvirtd_lxc.aug src/lxc/test_libvirtd_lxc.aug: augeas schemas
  for lxc.conf
* src/Makefile.am libvirt.spec.in: glue the new augeas files in

* src/lxc/lxc.conf: new configuration file, there is currently one
  tunable "log_with_libvirtd" that controls whether an lxc controller will
  log only to the container log file, or whether it will honor libvirtd's
  log output configuration. This provides a way to have libvirtd and its
  children log to a single file.  The default is to log to the container
  log file.
* src/Makefile.am libvirt.spec.in: add the new file
* src/lxc/lxc_conf.[ch] src/lxc/lxc_driver.c: read the new log value
  from the configuration file and pass the log informations when
  starting up a container.

* configure.in: look for AppArmor and devel
* src/security/security_apparmor.[ch] src/security/security_driver.c
  src/Makefile.am: add and plug the new driver
* src/security/virt-aa-helper.c: new binary which is used exclusively by
  the AppArmor security driver to manipulate AppArmor.
* po/POTFILES.in: registers the new files
* tests/Makefile.am tests/secaatest.c tests/virt-aa-helper-test:
  tests for virt-aa-helper and the security driver, secaatest.c is
  identical to seclabeltest.c except it initializes the 'apparmor'
  driver instead of 'selinux'

Fix "make rpcgen", broken by the directory reorganization.

* src/Makefile.am (rpcgen): Fix path to rpcgen_fix.pl.

Rename virStorageVolFormatFileSystem to virStorageFileFormat and
move to src/util/storage_file.[ch]

* src/Makefile.am: add src/util/storage_file.[ch]

* src/conf/storage_conf.[ch]: move enum from here ...

* src/util/storage_file.[ch]: .. to here

* src/libvirt_private.syms: update To/FromString exports

* src/storage/storage_backend.c, src/storage/storage_backend_fs.c,
  src/vbox/vbox_tmpl.c: update for above changes

Pull out all the QEMU monitor interaction code to a separate
file. This will make life easier when we need to drop in a
new implementation for the forthcoming QMP machine friendly
monitor support.

Next step is to add formal APIs for each monitor command,
and remove direct commands for sending/receiving generic
data.

* src/Makefile.am: Add qemu_monitor.c to build
* src/qemu/qemu_driver.c: Remove code for monitor interaction
* src/qemu/qemu_monitor_text.c, src/qemu/qemu_monitor_text.h: New
  file for monitor interaction
* po/POTFILES.in: Add src/qemu/qemu_monitor_text.c

When making changes to the remote protocol, src/ is always built
first, so rpcgen should live there, to avoid having to run make
in the 'daemon/' directory before building src/

* src/Makefile.am: Add rules for rpcgen, and drop -I../daemon from
  remote client build
* daemon/Makefile.am: Add -I../src/remote/ to libvirtd build
  and remove rpcgen rules
* daemon/libvirtd.c: Adapt include of remote_driver.h taking
  into account new -I flag
* daemon/remote_protocol.c, daemon/remote_protocol.h,
  daemon/remote_protocol.x: Move to src/remote/
* daemon/rpcgen_fix.pl: Move to src/remote/rpcgen_fix.pl

* src/bridge.c, src/bridge.h, src/buf.c, src/buf.h, src/cgroup.c,
  src/cgroup.h, src/conf.c, src/conf.h, src/event.c, src/event.h,
  src/hash.c, src/hash.h, src/hostusb.c, src/hostusb.h,
  src/iptables.c, src/iptables.h, src/logging.c, src/logging.h,
  src/memory.c, src/memory.h, src/pci.c, src/pci.h, src/qparams.c,
  src/qparams.h, src/stats_linux.c, src/stats_linux.h,
  src/threads-pthread.c, src/threads-pthread.h, src/threads-win32.c,
  src/threads-win32.h, src/threads.c, src/threads.h, src/util.c,
  src/util.h, src/uuid.c, src/uuid.h, src/virterror.c,
  src/virterror_internal.h, src/xml.c, src/xml.h: Move all files
  into src/util/
* daemon/Makefile.am: Add -Isrc/util/ to build flags
* src/Makefile.am: Add -Isrc/util/ to build flags and update for
  moved files
* src/libvirt_private.syms: Export cgroup APIs since they're now
  in util rather than linking directly to drivers
* src/xen/xs_internal.c: Disable bogus virEventRemoveHandle call
  when built under PROXY
* proxy/Makefile.am: Update for changed file locations. Remove
  bogus build of event.c
* tools/Makefile.am, tests/Makefile.am: Add -Isrc/util/ to build flags

* src/capabilities.c, src/capabilities.h, src/domain_conf.c,
  src/domain_conf.h, src/domain_event.c, src/domain_event.h,
  src/interface_conf.c, src/interface_conf.h,
  src/network_conf.c, src/network_conf.h, src/node_device_conf.c,
  src/node_device_conf.h, src/secret_conf.c, src/secret_conf.h,
  src/storage_conf.c, src/storage_conf.h, src/storage_encryption_conf.c,
  src/storage_encryption_conf.h: Move to src/conf/
* src/Makefile.am: Add -Isrc/conf to the individual build targets
  which need to use XML config APIs. Remove LIBXML_CFLAGS, LIBSSH2_CFLAGS
  and SELINUX_CFLAGS from global INCLUDES and only have them in build
  targets which actually need them.  Create a libvirt_conf.la
  convenience library for all config parsers
* src/hostusb.h: Remove bogus include of domain_conf.h
* tests/Makefile.am: Add -Isrc/conf. Remove bogus -I$builddir/src
  since it never has any generated header files
* daemon/Makefile.am: Add -Isrc/conf
* proxy/Makefile.am: Add -Isrc/conf and cope with renamed files
* src/hash.c: Remove bogus include of libxml/threads.h

* daemon/default-network.xml: Move to src/network/default.xml
* daemon/libvirtd_qemu.aug, daemon/test_libvirtd_qemu.aug: Move
  to src/qemu/
* src/qemu.conf: Move to src/qemu/qemu.conf
* daemon/Makefile.am: Remove rules for default-nmetwork.xml and
  libvirtd_qemu.aug and test_libvirtd_qemu.aug. Fix typo in
  uninstall-local that would install polkit again.
* src/Makefile.am: Add rules for installing network/default.xml
  and the qemu/*.aug files. Add test case for QEMU augeas files.
  Add uninstall-local rule for files/directories created during
  install. Rename install-exec-local to install-data-local.
  Only install qemu.conf if WITH_QEMU is set.
* tests/networkschematest: Update for XML location move

Move the virsh tool and its man page into the tools directory

* Makefile.am: Remove rules for virsh.1 man page
* virsh.1: Remove auto-generated file
* docs/Makefile.am: Remove rules for virsh.pod man page
* docs/virsh.pod: Move to tools/ directory
* src/Makefile.am, src/.gitignore: Remove rules for virsh
* src/console.c, src/console.h, src/*.ico, src/virsh_win_icon.rc,
  src/virsh.c: Move into tools/ directory
* tools/Makefile.am: Add rules for building virsh
* tools/.gitignore: Ignore virsh built files
* tests/virshtest.c, tests/int-overflow: Update for new
  virsh location

* src/Makefile.am, src/qemu/qemu_conf.h, src/qemu/qemu_driver.c,
  tests/seclabeltest.c: Adapt for changed paths
* src/security.c: Rename to src/security/security_driver.c
* src/security.h: Rename to src/security/security_driver.h
* src/security_selinux.c, src/security_selinux.h: Move to src/security/

* daemon/qemud.c, src/Makefile.am: Adapt for changed paths
* src/secret_driver.c, src/secret_driver.h: Move to src/secret/

* daemon/qemud.c, src/Makefile.am: Adapt for changed paths
* src/interface_driver.c: Rename to src/interface/netcf_driver.c
* src/interface_driver.h: Rename to src/interface/netcf_driver.h

* daemon/qemud.c, src/Makefile.am: Adapt for changed paths
* src/network_driver.c: Rename to src/network/bridge_driver.c
* src/network_driver.h: Rename to src/network/bridge_driver.h

* daemon/mdns.c: Remove bogus include
* daemon/qemud.c, src/Makefile.am, src/libvirt.c: Adapt for
  changed paths
* src/remote_internal.c: Rename to src/remote/remote_driver.c
* src/remote_internal.h: Rename to src/remote/remote_driver.h

* src/Makefile.am, src/libvirt.c: Adjust for changed paths
* src/test.c: Rename to src/test/test_driver.c,
* src/test.h: Rename to src/test/test_driver.h

* daemon/qemud.c, src/Makefile.am: Update for changed paths
* src/node_device*.{h,c}: Move to src/node_device/
* src/storage/storage_backend.c: Remove bogus import of node_device.c

* daemon/qemud.c, src/Makefile.am: Adapt for changed paths
* src/storage*.c, src/storage/*.h, src/parthelpre.c: Move
  to src/storage/

* src/openvz_conf.c, src/openvz_conf.h, src/openvz_driver.c,
  src/openvz_driver.h: Move to src/openvz/
* src/Makefile.am, src/libvirt.c: Adjust for changed paths

* src/uml_conf.c, src/uml_conf.h, src/uml_driver.c,
  src/uml_driver.h: Move to src/uml/
* daemon/qemud.c, src/Makefile.am: Adjust for changed paths

* src/qemu_conf.c, src/qemu_conf.h, src/qemu_driver.c,
  src/qemu_driver.h: Move to src/qemu/
* daemon/qemud.c, src/Makefile.am, tests/qemuargv2xmltest.c,
  tests/qemuhelptest.c, tests/qemuxml2argvtest.c,
  tests/qemuxml2xmltest.c: Adapt for changed paths

* src/lxc_conf.c, src/lxc_conf.h, src/lxc_container.c,
  src/lxc_container.h, src/lxc_controller.c, src/lxc_driver.c,
  src/lxc_driver.h, src/veth.c, src/veth.h: Move to src/lxc/
* src/opennebula/one_driver.c: Remove bogus veth.h include
* src/Makefile.am: Adjust for lxc paths
* daemon/qemud.c: Adjust include for lxc

* src/Makefile.am, src/proxy_internal.c, src/proxy_internal.h
  src/sexpr.c, src/sexpr.h, src/xen_unified.c, src/xen_unified.h,
  src/xen_internal.c, src/xen_internal.h, src/xen_inotify.c,
  src/xen_inotify.h, src/xend_internal.c, src/xend_internal.h,
  src/xm_internal.c, src/xm_internal.h, src/xs_internal.c,
  src/xs_internal.h: Move to src/xen/ directory
* proxy/Makefile.am, proxy/libvirt_proxy.c, src/Makefile.am,
  src/libvirt.c, tests/sexpr2xmltest.c, tests/statstest.c,
  tests/xencapstest.c, tests/xmconfigtest.c, tests/xml2sexprtest.c:
  Adapt to changed xen location
* src/stats_linux.h, src/stats_linux.c: Remove xen specific block
  stats APIs
* src/qemu_driver.c, src/uml_driver.c: Add missing sys/un.h include
  uncovered after change to stats_linux.h
* src/xen/block_stats.h, src/xen/block_stats.c: Add xen specific
  block stats APIs

* qemud/: Rename to daemon/
* Makefile.am, configure.in, src/Makefile.am, src/remote_internal.c,
  tests/Makefile.am, tests/eventtest.c: s/qemud/daemon/ where needed

* src/Makefile.am: Add gnulib.la for base64 functions
* src/libvirt_private.syms: Export virFileNameMatchesSuffix

* configure.in: Only define WITH_SECRETS if libvirtd is present
* src/Makefile.am: Only build secrets driver if WITH_SECRETS is
  defined. Always add SECRET_DRIVER_SOURCES to EXTRA_DIST

This implementation stores the secrets in an unencrypted text file,
for simplicity in implementation and debugging.

(Symmetric encryption, e.g. using gpgme, will not be difficult to add.
Because the TLS private key used by libvirtd is stored unencrypted,
encrypting the secrets file does not currently provide much additional
security.)

* include/libvirt/virterror.h, src/virterror.c (VIR_ERR_NO_SECRET): New
  error number.
* po/POTFILES.in, src/Makefile.am: Add secret_driver.
* bootstrap: Use gnulib's base64 module.
* src/secret_driver.c, src.secret_driver.h, src/libvirt_private.syms:
  Add local secret driver.
* qemud/qemud.c (qemudInitialize): Use the local secret driver.

Add a <secret> XML handling API, separate from the local driver, to
avoid manually generating XML in other parts of libvirt.

* src/secret_conf.c, src/secret_conf.h: New files.
* po/POTFILES.in, src/Makefile.am: Add secret_conf.

Remove the bogus dependancy between node_device.c & storage_backend.c
by moving the virWaitForDevices into util.h where it can be shared
safely

* src/storage_backend_disk.c, src/storage_backend_logical.c,
  src/storage_backend_mpath.c, src/storage_backend_scsi.c: Replace
  virStorageBackendWaitForDevices with virFileWaitForDevices
* src/storage_backend.c, src/storage_backend.h: Remove
  virStorageBackendWaitForDevices, virWaitForDevices
* src/util.h, src/util.c: Add virFileWaitForDevices
* configure.in: Move xmlrpc check further down after pkgconfig
  is detected
* src/Makefile.am: Add missing XMLRPC_CFLAGS/LIBS to opennebula
* src/libvirt_private.syms: Add many missing exports

* src/Makefile.am: Add usb.h and usb.h to libvirt_util.la
* src/libvirt_private.syms: Export symbols
* src/usb.c, src/usb.h: Helper APIs for USB host devices

* configure.in src/Makefile.am src/storage_backend.[ch]
  src/storage_conf.[ch] src/storage_backend_mpath.[ch] po/POTFILES.in:
  add a new module for storage multipath, it requires device-mapper

* configure.in src/Makefile.am: change detection and flags
* src/phyp/phyp_driver.c src/phyp/phyp_driver.h: connection now
  need to be done as part of the driver code, cleaned up by DV

Define an <encryption> tag specifying volume encryption format and
format-depenedent parameters (e.g. passphrase, cipher name, key
length, key).

Currently the only defined parameter is a reference to a "secret"
(passphrase/key) managed using the virSecret* API.

Only the qcow/qcow2 encryption format, and a "default" format used to
let libvirt choose the format during volume creation, is currently
supported.

This patch does not add any users; the <encryption> tag is added in
the following patches to both volumes (to support encrypted volume
creation) and domains.

* docs/*.html: Re-generate
* docs/formatstorageencryption.html.in, docs/sitemap.html.in:
  Add page describing storage encryption data format
* docs/schemas/Makefile.am, docs/schemas/storageencryption.rng:
  Add RNG schema for storage encryption format
* po/POTFILES.in: Add src/storage_encryption_conf.c
* src/libvirt_private.syms: Export virStorageEncryption* functions
* src/storage_encryption_conf.h, src/storage_encryption_conf.c: Internal
  helper APIs for dealing with storage encryption format
* libvirt.spec.in, mingw32-libvirt.spec.in: Add storageencryption.rng
  RNG schema

* src/vbox/vbox_driver.c: remove some old 2.5 switches and plug the
  3.0 driver
* src/vbox/vbox_V3_0.c src/vbox/vbox_CAPI_v3_0.h: the driver for
  VirtualBox 3.0
* src/vbox/vbox_tmpl.c: handle the new driver and add event support
* src/Makefile.am: plug in the new module

Features supported:
- Connects to HMC/VIOS or IVM systems.
- Life cycle commands (resume and shutdown).
- dumpxml
- 'list' and 'list --all'

What is being implemented:
- better and centralized control for UUID
- definexml
- CPU management commands

* src/domain_conf.c src/domain_conf.h: first version of the driver
* configure.in src/Makefile.am include/libvirt/virterror.h
  src/domain_conf.[ch] src/libvirt.c src/virterror.c: glue the driver
  in the general framework