Signed-off-by: NTang Chen <tangchen@cn.fujitsu.com>

The previous commit (56f34e55) accidentally bumped to latest gnulib,
but that adds a syntax check for CVE-2012-3386 that won't be fixed
until Automake 1.11.6/1.12.2 lands in more distros.

* .gnulib: Undo accidental commit.

Commit 9612e4b2 introduced a typo and unused variable that break
non-Linux builds.

* src/util/virfile.c (virFileLoopDeviceAssociate): Fix syntax error.

Based on off-list discussion with Royce.

* AUTHORS: Update to Royce Lv's preferred anglicized name.
* .mailmap: Likewise.

Clarify the docs to make more clear what this command does and that it
requires a guest agent running in the guest.

Commit 122fa379 introduces option to
store more than one host entry in a storage pool source definition. That
commit causes a regression, where a check is added that only one host
entry should be present (that actualy is not present as the source
structure was just allocated and zeroed) instead of allocating memory
for the host entry.

As the storage pool sources are stored in a list of structs, the pointer
returned by virStoragePoolSourceListNewSource() shouldn't be freed as it
points in the middle of a memory block. This combined with a regression
that takes the error path every time on caused a double-free abort on
the src struct in question.

Previous commits added code to unmount the existing /proc,
/sys and /dev hierarchies on the root filesystem of the
container. This should only have been done if the container's
root filesystem was the same as the host's root. ie if
the root source is '/'.   As it is, this causes LXC containersr
to fail to start if their root source is not '/'
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

The extra data need to be added to one test case

In preparation for introducing a full RPC protocol for
libvirt_lxc, switch over to using the virNetServer APIs
for the monitor connection
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

While it is not currently used elsewhere in libvirt, the code
for finding a free loop device & associating a file with it
is not LXC specific. Move it into the viffile.{c,h} file where
potentially shared code is more commonly kept.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Move the cgroup object into virLXCControllerPtr and rename
all the setup methods to include 'Cgroup' in their name
if appropriate
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Move the monitor FDs into the virLXCControllerPtr object
removing the need for the 'struct lxcMonitor' object
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

The virLXCControllerRun method is getting a little too large,
and about 50% of its code is related to setting up a /dev/pts
mount. Move the latter out into a dedicated method
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Move the security manager object into the virLXCControllerPtr
object. Also simplify the code creating it in the first place
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Move the list of loop device FDs into the virLXCControllerPtr
object and make sure that virLXCControllerStopInit will
close them all
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Keep the FD used to handshake with the libvirtd daemon in the
virLXCControllerPtr object.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Turn 'struct lxc_console' into virLXCControllerConsolePtr and make it
a part of virLXCControllerPtr
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Keep a record of the init PID in the virLXCController object
and create a virLXCControllerStopInit method for killing this
process
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Move the veth device name state into the virLXCControllerPtr
object and stop passing it around. Also use size_t instead
of unsigned int for the array length parameters.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

The LXC controller code is having to pass around an ever increasing
number of parameters between methods. To make the code more managable
introduce a virLXCControllerPtr to hold all this state, starting with
the container name and virDomainDefPtr object
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Currently the build of libvirt_lxc will cause recompilation
of all sources under src/util, src/conf, src/security and
more. Switch the libvirt_lxc process to link against the
libtool convenience libraries that are already built as
part of the main libvirt.os & libvirtd build process
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Refactor the RPC server dispatcher code so that if 'max_workers==0'
the entire server will run single threaded. This is useful for
use cases where there will only ever be 1 client connected
which serializes its requests
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

The callback that is invoked when a new RPC client is
initialized does not have any opaque parameter. Add
one so that custom data can be passed into the callback
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Recently the Ceph project defaulted auth_supported from 'none' to 'cephx'.

When no auth information was set for Ceph disks this would lead to librados defaulting to
'cephx', but there would be no additional authorization information.

We now explicitly set auth_supported to none when passing down arguments to Qemu.
Signed-off-by: NWido den Hollander <wido@widodh.nl>

In vshSnapshotListCollect() vshCalloc was called with swapped nmemb and
size argument. This caused division by zero in xalloc_oversized as the
macro doesn't expect size to be zero.

This patch adds an internal function vmwareUpdateVMStatus to
update the real state of the domain. This function is used in
various places in the driver, in particular to detect when
the domain has been shut down by the user with the "halt"
command.

This patch fills the domain argument that is sent to the remote side.
This caused a client segfault as the argument was NULL.

QEMU domains were marked as having managed save image even if they were
saved using the regular save. With this patch, domains are marked so
only when using managed save API.

Introducing the attribute vendor_id to force the CPUID instruction
in a kvm guest to return the specified vendor.

QEMU (and librbd) flush the cache on the source before the
destination starts, and the destination does not read any
changeable data before that, so live migration with rbd caching
is safe.

This makes 'virsh migrate' work with rbd and caching without the
--unsafe flag.
Reported-by: NVladimir Bashkirtsev <vladimir@bashkirtsev.com>
Signed-off-by: NJosh Durgin <josh.durgin@inktank.com>

* .mailmap: Add a name alias.

virDomainBlockStatsFlags can't collect total_time_ns for read/write/flush
because of key typo when retriveing from qemu cmd result
Signed-off-by: Nlvroyce <lvroyce@linux.vnet.ibm.com>

* configure.ac docs/news.html.in libvirt.spec.in: new version and
  documentation update
* po/*.po*: updated and regenerated localizations

Fixed up virsh -V output by removing invalid WITH_PROXY & WITH_ONE
checks, adding several missing checks, and fixing the DTrace check.
Signed-off-by: NDoug Goldstein <cardoe@cardoe.com>
Signed-off-by: NEric Blake <eblake@redhat.com>

Reported by Jason Helfman as a build-breaker on FreeBSD.

* src/conf/domain_conf.c (virDomainFSDefParseXML): Use POSIX
spelling.
* src/openvz/openvz_conf.c (openvzReadFSConf): Likewise.

Below patch fixes this coverity report:

/libvirt/src/conf/nwfilter_conf.c:382:
leaked_storage: Variable "varAccess" going out of scope leaks the storage it points to.

Since we are mounting a new /dev in the container, we must
remove any sub-mounts like /dev/shm, /dev/mqueue, etc,
otherwise they'll be recorded in /proc/mounts, but not be
accessible to applications.