- 22 6月, 2016 1 次提交
-
-
由 Jiri Denemark 提交于
Since virQEMUCapsNewForBinaryInternal was introduced, virQEMUCapsNewForBinary is no longer used outside qemu_capabilities.c. Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
-
- 14 6月, 2016 3 次提交
-
-
由 John Ferlan 提交于
Add the capability flag and checks for the qemu object 'tls-creds-x509' Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
-
由 Martin Kletzander 提交于
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>
-
由 Jim Fehlig 提交于
The virQEMUDriverConfig object contains lists of loader:nvram pairs to advertise firmwares supported by by the driver, and qemu_conf.c contains code to populate the lists, all of which is useful for other drivers too. To avoid code duplication, introduce a virFirmware object to encapsulate firmware details and switch the qemu driver to use it. Signed-off-by: NJim Fehlig <jfehlig@suse.com>
-
- 10 6月, 2016 1 次提交
-
-
由 Daniel P. Berrange 提交于
Nearly all the methods in the nodeinfo file are given a 'const char *sysfs_prefix' parameter to override the default sysfs path (/sys/devices/system). Every single caller passes in NULL for this, except one use in the unit tests. Furthermore this parameter is totally Linux-specific, when the APIs are intended to be cross platform portable. This removes the sysfs_prefix parameter and instead gives a new method linuxNodeInfoSetSysFSSystemPath for use by the test suite. For two of the methods this hardcodes use of the constant SYSFS_SYSTEM_PATH, since the test suite does not need to override the path for thos methods. Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
- 09 6月, 2016 1 次提交
-
-
由 Pavel Hrdina 提交于
Add a new capability to detect support of unix sockets for spice graphics. Signed-off-by: NPavel Hrdina <phrdina@redhat.com>
-
- 07 6月, 2016 1 次提交
-
-
由 Martin Kletzander 提交于
Add capabilities for both qxl and qxl-vga devices. Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>
-
- 23 5月, 2016 4 次提交
-
-
由 Ján Tomko 提交于
Before removal of QEMU_CAPS_DEVICE, its only usage was or'd with QEMU_CAPS_DEVICE. Now it's unused.
-
由 Ján Tomko 提交于
We support qemu version 0.12.0+, which has it.
-
由 Ján Tomko 提交于
We have been assuming its support if qemu supports -device, which all the supported versions do.
-
由 Ján Tomko 提交于
We have been always setting the capability on if qemu has QEMU_CAPS_DEVICE.
-
- 18 5月, 2016 2 次提交
-
-
由 Andrea Bolognani 提交于
For use in the test suite.
-
由 Andrea Bolognani 提交于
This utility function extracts some of the logic from virQEMUCapsFillDomainFeatureGICCaps() so that it can be used in a different context.
-
- 17 5月, 2016 3 次提交
-
-
由 Andrea Bolognani 提交于
The only QEMU versions that don't have such capability are <0.11, which we no longer support anyway
-
由 Andrea Bolognani 提交于
The only QEMU versions that don't have such capability are <0.11, which we no longer support anyway
-
由 Andrea Bolognani 提交于
The only QEMU versions that don't have such capability are <0.12, which we no longer support anyway. Additionally, this solves the issue of some QEMU binaries being reported as not having such capability just because they lacked the {kvm-}pci-assign QMP object.
-
- 16 5月, 2016 2 次提交
-
-
由 Cole Robinson 提交于
-name guest= is the explicit parameter for passing a VM name. Using it is required to allow a VM with an '=' in the name https://bugzilla.redhat.com/show_bug.cgi?id=1276485
-
由 Jiri Denemark 提交于
When -cpu host is supported by a QEMU binary, a user can use <cpu mode='host-passthrough'/> in domain XML even when libvirtd failed to find a matching model for the host CPU. Let's make it obvious by advertising <cpuselection/> guest capability whenever -cpu host is supported. Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
-
- 10 5月, 2016 2 次提交
-
-
由 Cole Robinson 提交于
Requires adding the plumbing for <device><video> The value is <enum name='modelType'> to match the associated domain XML of <video><model type='XXX'/> Wire it up for qemu too
-
由 Cole Robinson 提交于
Requires adding the plumbing for <device><graphics> Wire it up for qemu too
-
- 06 5月, 2016 2 次提交
-
-
由 Jiri Denemark 提交于
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
-
由 Jiri Denemark 提交于
We will need to use the formatter directly for testing QEMU capabilities code. Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
-
- 05 5月, 2016 1 次提交
-
-
由 Jiri Denemark 提交于
virQEMUCapsNewForBinary unconditionally loads data from cache and probes using both QMP and -help parsing, which is suboptimal when we want to use it in tests. Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
-
- 04 5月, 2016 1 次提交
-
-
由 John Ferlan 提交于
An iothread for virtio-scsi is a property of the controller. Add a lookup of the 'virtio-scsi-pci' and 'virtio-scsi-ccw' device properties and parse the output. For both, support for the iothread was added in qemu 2.4 while support for virtio-scsi in general was added in qemu 1.4. Modify the various mock capabilities replies (by hand) to reflect the when virtio-scsi was supported and then specifically when the iothread property was added. For versions prior to 1.4, use the no device error return for virtio-scsi. For versions 1.4 to before 2.4, add some data for virtio-scsi-pci even though it isn't complete we're not looking for anything specific there anyway. For 2.4 to 2.6, add a more complete reply. Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
-
- 03 5月, 2016 2 次提交
-
-
由 Cole Robinson 提交于
Reports whether we support -device nec-usb-xhci,p3=XXX value, which has been available since qemu 1.3.0
-
由 Ján Tomko 提交于
Use it everywhere except for virQEMUCapsFillDomainFeatureGICCaps.
-
- 02 5月, 2016 1 次提交
-
-
由 Peter Krempa 提交于
If qemu doesn't support DEVICE_TRAY_MOVED event the code that attempts to change media would attempt to re-eject the tray even if it wouldn't be notified when the tray opened. Add a capability bit and skip retrying for old qemus.
-
- 20 4月, 2016 4 次提交
-
-
由 Andrea Bolognani 提交于
Implement support for saving GIC capabilities in the cache and read them back.
-
由 Andrea Bolognani 提交于
Take the GIC capabilities stored in a virQEMUCaps instance and update a virDomainCaps instance appropriately.
-
由 Andrea Bolognani 提交于
QEMU introduced the query-gic-capabilities QMP command with commit 4468d4e0f383: use the command, if available, to probe available GIC capabilities. The information obtained is stored in a virQEMUCaps instance, and will be later used to fill in a virDomainCaps instance.
-
由 Andrea Bolognani 提交于
The struct contains a single boolean field, 'supported': the meaning of this field is too generic to be limited to devices only, and in fact it's already being used for other things like loaders and OSs. Instead of trying to come up with a more generic name just get rid of the struct altogether.
-
- 15 4月, 2016 3 次提交
-
-
由 Peter Krempa 提交于
The flag is now unused and all qemus supported by libvirt already support it.
-
由 Laine Stump 提交于
The pxb device is a PCIe expander bus that can be added to any Q35-based machinetype. A single PCIe port (*not* hotpluggable) is provided; if more than one device is desired, or if hotplug support is needed, either a pcie-root-port, or some combination of pcie-switch-upstream-port and pcie-swith-downstream-ports must be added to it. It can have a NUMA node number associated with it, as well as a bus number.
-
由 Laine Stump 提交于
The pxb device is a PCI expander bus that can be added to any 440fx-based machinetype. The PCI bus that is created has 32 standard PCI slots (hotpluggable). It can have a NUMA node number associated with it, as well as a bus number.
-
- 08 4月, 2016 1 次提交
-
-
由 Ján Tomko 提交于
Some places already check for "virt-" prefix as well as plain "virt". virQEMUCapsHasPCIMultiBus did not, resulting in multiple PCI devices having assigned the same unnumbered "pci" alias. Add a test for the "virt-2.6" machine type which also omits the <model type='virtio'/> in <interface>, to check if qemuDomainDefaultNetModel works too. https://bugzilla.redhat.com/show_bug.cgi?id=1325085
-
- 07 4月, 2016 1 次提交
-
-
由 John Ferlan 提交于
Add a capability bit for the qemu secret object. Adjust the 2.6.0-1 caps/replies to add the secret object. For the .replies it's take from the '{"execute":"qom-list-types"}' output.
-
- 25 3月, 2016 1 次提交
-
-
由 Jovanka Gulicoska 提交于
These uses of virGetLastError message are just duplicating virGetLastErrorMessage.
-
- 12 3月, 2016 1 次提交
-
-
由 John Ferlan 提交于
Add new function to manage adding the serial device options to the command line removing that task from the mainline qemuBuildCommandLine. Using const virDomainDef causes collateral damage in other called APIs which need to make the similar adjustment Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
-
- 11 3月, 2016 1 次提交
-
-
由 Marc-André Lureau 提交于
QEMU (somewhere around 2.0) added a new sub-option to the -name flag -name debug-threads=on. Signed-off-by: NMarc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
-
- 10 3月, 2016 1 次提交
-
-
由 Daniel P. Berrange 提交于
Honour the <log file='...'/> element in chardevs to output data to a file. This requires QEMU >= 2.6 Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-