Simplify the GEN_TEST_FUNC() and target of the DO_TEST_SIMPLE() macros
by using autoptr support.
Signed-off-by: NEric Blake <eblake@redhat.com>
Acked-by: NPeter Krempa <pkrempa@redhat.com>

Upcoming tests are going to use VIR_AUTOPTR to simplify test cleanup.
Signed-off-by: NEric Blake <eblake@redhat.com>
Acked-by: NPeter Krempa <pkrempa@redhat.com>

Signed-off-by: NJohannes Holmberg <johannes.holmberg@dataductus.se>
Reviewed-by: NMartin Kletzander <mkletzan@redhat.com>

Now that we never get to the actual snapshot code if there's nothing to
do we can remove the variable and surrounding logic.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Skip actual snapshot creation code if we have 0 disks to snapshot.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

All cases taking the 'cleanup' path can take the original 'error' path.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Introduce 'rc' for collecting state from monitor commands so that we can
initialize 'ret' to -1. This also fixes few cases which could return 0
from the function despite an error condition.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

qemuDomainSnapshotDiskDataFree also removes the resources associated
with the disk data. Move the unlinking of the just-created file so that
we can unify the cleanup paths.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

In commit cbb4d229 I named the function with 'free' suffix, but at
that time it already did some non-freeing tasks. Rename it to make it
obvious that it's not just memory managemet.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

The function skips disks which are not selected for snapshot. Rather
than creating a sparse array and check whether the given field is filled
compress the entries.

Note that this does not allocate a smaller array, but the memory
allocation is short-lived.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

If there's an offline config definition save it unconditionally even if
it was not modified.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

The error path is unlikely thus saving the status XML even if we didn't
modify it does not add much burden.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

After getting rid of pre-transaction qemu support the cleanup section is
unused.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

The caller has it so there's no point in getting it again.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Pass in the schema since it works with the 'file' test now.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>

Pass in the schema data from the caller if QMP schema testing is
desired.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>

In case when we are testing a QMP command we can try to schema check it
so that we catch inconsistencies.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>

Use VIR_AUTOFREE and get rid of the cleanup section.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>

This configuration can be used by gitdm to generate reports about
libvirt development.

The goal I was working with was being able to generate a report
for every single libvirt release and having zero "email address
as company" entries; picking different commit ranges might result
in some contributions not being accounted for.

I had to make some judgement calls when the situation was not
entirely clear-cut: when in doubt, and not finding any obvious
signs of the opposite being true, I mostly ended up dumping
people in the "unaffiliated contributions" bin. If I got it
wrong, and companies want to get recognition for their sponsored
contributions to libvirt, they can send patches.
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Fabiano Fidencio was working for Red Hat when he contributed to
libvirt, Shi Lei's non-company email address contains the company
name so it's fair to assume contributions using it were made on
company time, and Adrian Brzezinski's personal email was used
for the S-o-b while the git authorship information clearly pointed
at the company being involved.
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Validate @keycodes before successfully returning. Since this is test
driver, @holdtime is being unused here.
Signed-off-by: NIlias Stamatis <stamatis.iliass@gmail.com>
Reviewed-by: NErik Skultety <eskultet@redhat.com>

Commit 2f2254c7 attempted to fix a memory leak by ensuring
cpumapToSet is always a freshly allocated bitmap, but regrettably
introduced a NULL pointer access while doing so, because it called
virBitmapCopy() without allocating the destination bitmap first.

Solve the issue by using virBitmapNewCopy() instead.
Reported-by: NJohn Ferlan <jferlan@redhat.com>
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NErik Skultety <eskultet@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

The flag causes undefine to fail if trying to remove a non-RBD disk. Add
a warning about that.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NFabiano Fidêncio <fidencio@redhat.com>
ACKed-by: NEric Blake <eblake@redhat.com>

The old flag name confused some users into thinking it's the correct way
to undefine a VM with libvirt (not storage volume) snapshots.

The correct flag in that case is way less obvious: --snapshots-metadata.

Rename the flag (by adding an alias) to something which will promote
looking up the actual purpose of the flag.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NFabiano Fidêncio <fidencio@redhat.com>
ACKed-by: NEric Blake <eblake@redhat.com>

Reword the end of the help string to make it more obvious that the VM
must be inactive.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NFabiano Fidêncio <fidencio@redhat.com>
ACKed-by: NEric Blake <eblake@redhat.com>

Due to this bug the following command would fail on any host where TSC
frequency can be probed:

    $ virsh capabilities | virsh cpu-baseline /dev/stdin
    error: unsupported configuration: Invalid TSC frequency

https://bugzilla.redhat.com/show_bug.cgi?id=1641702Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

It's a premature optimization. It's perfectly acceptable for
'error' label to deal with @vm == NULL case.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NNikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1717090Signed-off-by: NErik Skultety <eskultet@redhat.com>

We're using VIR_AUTOPTR() for everything now, plus the
cleanup section was not doing anything useful anyway.
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

In two out of three scenarios we are cleaning up properly after
ourselves, but commit 5f2212c0 has changed the remaining one
in a way that caused it to start leaking cpumapToSet.

Refactor the logic so that cpumapToSet is always a freshly
allocated bitmap that gets cleaned up automatically thanks to
VIR_AUTOPTR(); this also allows us to remove the hostcpumap
variable.
Reported-by: NJohn Ferlan <jferlan@redhat.com>
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Right now, if numad fails, we raise an error but return an
empty string to the caller instead of a NULL pointer, which
means processing will continue and the user will see

  # virsh start guest
  error: Failed to start domain guest
  error: invalid argument: Failed to parse bitmap ''

instead of a more reasonable

  # virsh start guest
  error: Failed to start domain guest
  error: operation failed: Failed to query numad for the advisory nodeset

Make sure the user gets a better error message.

https://bugzilla.redhat.com/show_bug.cgi?id=1716387Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NDaniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Ever since the feature was introduced with commit 0f8e7ae3,
it has contained a logic error in that it attempted to use a NUMA
node map where a CPU map was expected.

Because of that, guests using <numatune> might fail to start:

  # virsh start guest
  error: Failed to start domain guest
  error: cannot set CPU affinity on process 40055: Invalid argument

This was particularly easy to trigger on POWER 8 machines, where
secondary threads always show up as offline in the host: having

  <numatune>
    <memory mode='strict' placement='static' nodeset='1'/>
  </numatune>

in the guest configuration, for example, would result in libvirt
trying to set the process affinity so that it would prefer
running on CPU 1, but since that's a secondary thread and thus
shows up as offline, the operation would fail, and so would
starting the guest.

Use the newly introduced virNumaNodesetToCPUset() to convert the
NUMA node map to a CPU map, which in the example above would be
48,56,64,72,80,88 - a valid input for virProcessSetAffinity().

https://bugzilla.redhat.com/show_bug.cgi?id=1703661Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

This helper converts a set of NUMA node to the set of CPUs
they contain.
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

This argument wasn't validated anywhere, neither in the generic
implementation nor in the individual drivers. As a result a call to this
function with a large enough codeset value prior to this change causes
libvirtd to crash.

This happens because all drivers call virKeycodeValueTranslate which
uses codeset as an index to the virKeymapValues array, causing an
out-of-bounds error.
Signed-off-by: NIlias Stamatis <stamatis.iliass@gmail.com>
Reviewed-by: NErik Skultety <eskultet@redhat.com>

Always return "domain_name" + "host".
Signed-off-by: NIlias Stamatis <stamatis.iliass@gmail.com>
Reviewed-by: NErik Skultety <eskultet@redhat.com>

Signed-off-by: NAndrea Bolognani <abologna@redhat.com>