This unbreaks emulators that don't support this command such as
qemu-system-mips*.

Reference: http://bugs.debian.org/854125

Due to the extra architecture-specific logic, it's already
necessary for users to call virQEMUCapsHasPCIMultiBus(),
so the capability itself is just a pointless distraction.

The old data was generated from not released QEMU.
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

Qemu 2.8.0+ changes arguments structure for blockdev-add in the effort
to make it finally stable. Since libvirt recently added the detection of
gluster debug support relying on the old syntax we need to add the new
as well.

Qemu decided to change a parameter name in rc-state which was not
captured by the 2.8.0 data. Bump it to current version.

Add the capability to detect if the qemu binary can support the feature
to use throttling.group.

QEMU 2.8.0 adds support for unavailable-features in
query-cpu-definitions reply. The unavailable-features array lists CPU
features which prevent a corresponding CPU model from being usable on
current host. It can only be used when all the unavailable features are
disabled. Empty array means the CPU model can be used without
modifications.

We can use unavailable-features for providing CPU model usability info
in domain capabilities XML:

    <domainCapabilities>
      ...
      <cpu>
        <mode name='host-passthrough' supported='yes'/>
        <mode name='host-model' supported='yes'>
          <model fallback='allow'>Skylake-Client</model>
          ...
        </mode>
        <mode name='custom' supported='yes'>
          <model usable='yes'>qemu64</model>
          <model usable='yes'>qemu32</model>
          <model usable='no'>phenom</model>
          <model usable='yes'>pentium3</model>
          <model usable='yes'>pentium2</model>
          <model usable='yes'>pentium</model>
          <model usable='yes'>n270</model>
          <model usable='yes'>kvm64</model>
          <model usable='yes'>kvm32</model>
          <model usable='yes'>coreduo</model>
          <model usable='yes'>core2duo</model>
          <model usable='no'>athlon</model>
          <model usable='yes'>Westmere</model>
          <model usable='yes'>Skylake-Client</model>
          ...
        </mode>
      </cpu>
      ...
    </domainCapabilities>
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

CPU models (and especially some additional details which we will start
probing for later) differ depending on the accelerator. Thus we need to
call query-cpu-definitions in both KVM and TCG mode to get all data we
want.

Tests in tests/domaincapstest.c are temporarily switched to TCG to avoid
having to squash even more stuff into this single patch. They will all
be switched back later in separate commits.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

Do all the stuff for the vhost-scsi capability in QEMU,
so it's in place for our checks later.
Signed-off-by: NEric Farman <farman@linux.vnet.ibm.com>
Reviewed-by: NBoris Fiuczynski <fiuczy@linux.vnet.ibm.com>

Teach qemu driver to detect whether qemu supports specifying debug level
for gluster volumes.
Signed-off-by: NPrasanna Kumar Kalever <prasanna.kalever@redhat.com>
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>

Allow detecting capabilities according to the qemu QMP schema. This is
necessary as sometimes the availability of certain options depends on
the presence of a field in the schema.

This patch adds support for loading the QMP schema when detecting qemu
capabilities and adds a very simple query language to allow traversing
the schema and selecting a certain element from it.

The infrastructure in this patch uses a query path to set a specific
capability flag according to the availability of the given element in
the schema.

Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Add the capability to detect if the qemu binary can support the feature
to use bps-max-length and friends.

Commit 21373feb added support for primary virtio-vga device but it was
checking for virtio-gpu.  Let's check for existence of virtio-vga if we
want to use it.

Virtio video device is currently represented by three different models
*virtio-gpu-device*, *virtio-gpu-pci* and *virtio-vga*.  The first two
models are tied together and if virtio video devices is compiled in they
both exist.  However, the *virtio-vga* model doesn't have to exist on
some architectures even if the first two models exist.  So we cannot
group all three together.
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

If QEMU in question supports QMP, this capability is set if
QEMU_CAPS_DEVICE_QXL was set based on existence of "-device qxl". If
libvirt needs to parse *help*, because there is no QMP support, it
checks for existence of "-vga qxl", but it also parses output of
"-device ?" and sets QEMU_CAPS_DEVICE_QXL too.

Now that libvirt supports only QEMU that has "-device" implemented it's
safe to drop this capability and stop using it.
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

This patch simplifies QEMU capabilities for QXL video device.  QEMU
exposes this device as *qxl-vga* and *qxl* and they are both the same
device with the same set of parameters, the only difference is that
*qxl-vga* includes VGA compatibility.

Based on QEMU code they are tied together so it's safe to check only for
presence of only one of them.

This patch also removes an invalid test case "video-qxl-sec-nodevice"
where there is only *qxl-vga* device and *qxl* device is not present.
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

QEMU reports whether 'query-hotpluggable-cpus' is supported for a given
machine type. Extract and cache the information using the capability
cache.

When copying the capabilities for a new start of qemu, mask out the
presence of QEMU_CAPS_QUERY_HOTPLUGGABLE_CPUS if the machine type
doesn't support hotpluggable cpus.

Check whether the disable-legacy property is present on the following
devices:
  virtio-balloon-pci
  virtio-blk-pci
  virtio-scsi-pci
  virtio-serial-pci
  virtio-9p-pci
  virtio-net-pci
  virtio-rng-pci
  virtio-gpu-pci
  virtio-input-host-pci
  virtio-keyboard-pci
  virtio-mouse-pci
  virtio-tablet-pci

Assuming that if QEMU knows other virtio devices where this property
is applicable, it will have at least one of these devices.

Added in QEMU by:
commit e266d421490e0ae83044bbebb209b2d3650c0ba6
    virtio-pci: add flags to enable/disable legacy/modern

As of (v2.7.0-rc1-52-g42e0d60)

Since its release of 2.4.0 qemu is able to enable System
Management Module in the firmware, or disable it. We should
expose this capability in the XML. Unfortunately, there's no good
way to determine whether the binary we are talking to supports
it. I mean, if qemu's run with real machine type, the smm
attribute can be seen in 'qom-list /machine' output. But it's not
there when qemu's run with -M none. Therefore we're stuck with
version based check.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Check whether QEMU supports -device intel-iommu

Note that the presence of this option does not mean that it's
usable because of a bug in earlier QEMU versions, but it's
better than nothing.

https://bugzilla.redhat.com/show_bug.cgi?id=1235580

Support for SMP topology was added by qemu commit dc6b1c09849484fbbc50
prior to 0.12.0, our minimum supported qemu version.

$ git describe --tags dc6b1c09849484fbbc50803307e4c7a3d81eab62
v0.11.0-rc0-449-gdc6b1c0
$ git describe --tags --contains dc6b1c09849484fbbc50803307e4c7a3d81eab
v0.12.0-rc0~1477

Add a new capability for the -display command line option, which has
been present since QEMU 1.0.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Add the capability flag and checks for the qemu object 'tls-creds-x509'
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Add a new capability to detect support of unix sockets for spice
graphics.
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

Add capabilities for both qxl and qxl-vga devices.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

We support qemu version 0.12.0+, which has it.

We have been assuming its support if qemu supports -device,
which all the supported versions do.

The only QEMU versions that don't have such capability are <0.11,
which we no longer support anyway

The only QEMU versions that don't have such capability are <0.11,
which we no longer support anyway

The only QEMU versions that don't have such capability are <0.12,
which we no longer support anyway.

Additionally, this solves the issue of some QEMU binaries being
reported as not having such capability just because they lacked
the {kvm-}pci-assign QMP object.

-name guest= is the explicit parameter for passing a VM name. Using
it is required to allow a VM with an '=' in the name

https://bugzilla.redhat.com/show_bug.cgi?id=1276485

Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

Signed-off-by: NJiri Denemark <jdenemar@redhat.com>