So far this function was not kept in sync with changing
virDomainDiskDef. Fill in all the missing checks and reorganize
their order so it's easier to track which items are not being
checked for.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

I always felt like this function is qemu specific rather than
libvirt-wide. Other drivers may act differently on virDomainDef
change and in fact may require talking to underlying hypervisor
even if something else's than disk->src has changed.  I know that
the function is still incomplete, but lets break that into two
commits that are easier to review. This one is pure code
movement.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Firstly, our coding guidelines suggest using 'cleanup' label
instead of 'end'. Then, @ret should be set to value representing
success as the last statement before the 'cleanup' label.
And while I am at this function, lets enumerate all the possible
enum items (virDomainDiskDevice) and avoid using 'default' in
switch(). Pooh. Also, nothing bad happens if we look up the disk
to change in the domain upfront. In fact, it's going to be
helpful later when we want to keep some old values for performing
a rollback.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

This new private API should return true iff sources of two disks
differs in sense that qemu should be instructed to change the
disk backend. For instance, ejecting a CDROM is such case, or
pointing disk into a different ISO location, and so on.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

While we currently only allow changing a media in a disk, this is
going to change in a while, so the function name would be
invalid. Moreover, the old name does not match the pattern laid
out by other update functions.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

https://bugzilla.redhat.com/show_bug.cgi?id=1159219

So, in 11e058ca I've tried to make UpdateDevice update
startupPolicy too. And it worked well until somebody came around
and pushed d0dc6c03 which accidentally removed my
contribution. Redo my commit.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

When persistently migrating a domain to a destination host where the
same domain already exists (i.e., it is persistent and shutdown at the
destination), we would happily throw away the original persistent
definition without properly freeing it. And when updating the definition
fails for some reason we don't properly revert to the original state
leaving the domain broken.

In addition to fixing these issues, the patch also makes sure the domain
definition parsed from a migration cookie is either used or freed.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

For quite a long time we don't need to postpone queueing events until
the end of the function since we no longer have the big driver lock.
Let's make the code of qemuMigrationFinish simpler by queuing events at
the time we generate them.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

Every single call to qemuDomainEventQueue() uses the following pattern:

    if (event)
        qemuDomainEventQueue(driver, event);

Let's move the check for valid event to qemuDomainEventQueue and
simplify all callers.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

Finish is the final state in v2 of our migration protocol. If something
fails, we have no option to abort the migration and resume the original
domain. Non fatal errors (such as failure to start guest CPUs or make
the domain persistent) has to be treated as success. Keeping the domain
running while reporting the failure was just asking for trouble.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

Whenever something fails during incoming migration in Finish phase
before we started guest CPUs, we need to kill the domain in addition to
reporting the failure.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

When we save status XML at the point during migration where we have
already started the domain on destination, we can't really go back and
abort migration. Thus the only thing we can do is to log a warning and
report success.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

Offline migration is quite special because we don't really need to do
anything but make the domain persistent. Let's do it separately from
normal migration to avoid cluttering the code with
!(flags & VIR_MIGRATE_OFFLINE).
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

Separate code which makes incoming domain persistent into
qemuMigrationPersist.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

Commit id 'f1f68ca3' added code to remove the directory paths for
auto-generated sockets, but that code could be called before the
paths were created resulting in generating error messages from
virFileDeleteTree indicating that the file doesn't exist.

Rather than "enforce" all callers to make the non-NULL and existence
checks, modify the virFileDeleteTree API to silently ignore NULL on
input and non-existent directory trees.

When looking for a QEMU binary suitable for running ppc64le guests
we have to take into account the fact that we use the QEMU target
as key for the hash, so direct comparison is not good enough.

Factor out the logic from virQEMUCapsFindBinaryForArch() to a new
virQEMUCapsFindTarget() function and use that both when looking
for QEMU binaries available on the system and when looking up
QEMU capabilities later.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1260753

Fixes the following error when attempting to add a disk with bus='virtio'
to a machine which actually supports virtio-mmio (caught with ARM virt):

virtio disk cannot have an address of type 'virtio-mmio'

The problem has been likely introduced by
e8d55172. Before that
qemuAssignDevicePCISlots() was never called for ARM "virt" machine.
Signed-off-by: NPavel Fedin <p.fedin@samsung.com>

We may want to do some decisions in drivers based on fact if we
are running as privileged user or not. Propagate this info there.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Commit 8125113c added code that should remove the disk backend if the
fronted hotplug failed for any reason. The code had a bug though as it
used the disk string for unplug rather than the backend alias. Fix the
code by pre-creating an alias string and using it instead of the disk
string. In cases where qemu does not support QEMU_CAPS_DEVICE, we ignore
the unplug of the backend since we can't really create an alias in that
case.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1262399

There's a couple reports of things failing in this area (bug 1259070),
but it's tough to tell what's going wrong without stderr from
qemu-bridge-helper. So let's report stderr in the error message

Couple new examples:

virbr0 is inactive:
internal error: /usr/libexec/qemu-bridge-helper --use-vnet --br=virbr0 --fd=21: failed to communicate with bridge helper: Transport endpoint is not connected
stderr=failed to get mtu of bridge `virbr0': No such device

bridge isn't on the ACL:
internal error: /usr/libexec/qemu-bridge-helper --use-vnet --br=br0 --fd=21: failed to communicate with bridge helper: Transport endpoint is not connected
stderr=access denied by acl file

Up until now, the default has been rtl8139, but no check was in
place to make sure that device was actually available.

Now we try rtl8139, e1000 and virtio-net in turn, checking for
availability before using any of them: this means we have a much
better chance for the guest to be able to boot.

This capability can be used to detect whether or not the QEMU
binary supports the virtio-net-* network device.

This capability can be used to detect whether or not the QEMU
binary supports the e1000 network device.

This capability can be used to detect whether or not the QEMU
binary supports the rtl8139 network device.

Commit f1f68ca3 did not report an error if virFileMakePath()
returned -1.  Well, who would've guessed function with name starting
with 'vir' sets an errno instead of reporting an error the libvirt way.
Anyway, let's fix it, so the output changes from:

  $ virsh start arm
  error: Failed to start domain arm
  error: An error occurred, but the cause is unknown

to:

  $ virsh start arm
  error: Failed to start domain arm
  error: Cannot create directory '/var/lib/libvirt/qemu/domain-arm': Not
  a directory

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1146886Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

If the current live definition does not have memory hotplug enabled, but
the persistent one does libvirt would reject migration if the
destination does not support memory hotplug even if the user didn't want
to persist the VM at the destination and thus the XML containing the
memory hotplug definition would not be used. To fix this corner case the
code will check for memory hotplug in the newDef only if
VIR_MIGRATE_PERSIST_DEST was used.

Commit id '2e7cea24' added a check for an error from Finish instead
of 'unexpected error'; however, if for some reason there wasn't an
error, then virGetLastError could return NULL resulting in the
NULL pointer deref to err->domain.

https://bugzilla.redhat.com/show_bug.cgi?id=1258361

When attaching a disk, controller, or rng using an address type ccw
or s390, we need to ensure the support is provided by both the machine.os
and the emulator capabilities (corollary to unconditional setting when
address was not provided for the correct machine.os and emulator.

For an inactive guest, an addition followed by a start would cause the
startup to fail after qemu_command builds the command line and attempts
to start the guest. For an active guest, libvirtd would crash.

Rather than have different usages of STR function in order to determine
whether the domain is s390-ccw or s390-ccw-virtio, make a single API
which will check the machine.os prefix. Then use the function.

Adds a new interface type using UDP sockets, this seems only applicable
to QEMU but have edited tree-wide to support the new interface type.

The interface type required the addition of a "localaddr" (local
address), this then maps into the following xml and qemu call.

<interface type='udp'>
  <mac address='52:54:00:5c:67:56'/>
  <source address='127.0.0.1' port='11112'>
    <local address='127.0.0.1' port='22222'/>
  </source>
  <model type='virtio'/>
  <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x0'/>
</interface>

QEMU call:
	-net socket,udp=127.0.0.1:11112,localaddr=127.0.0.1:22222

Notice the xml "local" entry becomes the "localaddr" for the qemu call.

reference:
http://lists.gnu.org/archive/html/qemu-devel/2011-11/msg00629.htmlSigned-off-by: NJonathan Toppins <jtoppins@cumulusnetworks.com>
Signed-off-by: NJán Tomko <jtomko@redhat.com>

This reverts commit 1ce7c1d2,
which introduced a significant semantic change to the
virDomainGetInfo() API. Additionally, the change was only
made to 2 of the 15 virt drivers.

Conflicts:
	src/qemu/qemu_driver.c
Signed-off-by: NJim Fehlig <jfehlig@suse.com>

https://bugzilla.redhat.com/show_bug.cgi?id=1226234#c3

If the qemu monitor fails to remove the memory from the guest for
any reason, the auditlog message will incorrectly use the current
actual memory (via virDomainDefGetMemoryActual) instead of the
value we were attempting to reduce to. The result is the 'new-mem'
and 'old-mem' values for the auditlog message would be identical.

This patch creates a local 'newmem' which accounts for the current
memory size minus the memory which is being removed. NB, for the
success case this results in the same value that would be returned
by virDomainDefGetMemoryActual without the need to do the math. This
follows the existing code which would subtract the size for cur_balloon.
Signed-off-by: NLuyao Huang <lhuang@redhat.com>

https://bugzilla.redhat.com/show_bug.cgi?id=1226234#c3

Prior to this patch, after successfully hot plugging memory
the audit log indicated that the update failed, e.g.:

type=VIRT_RESOURCE ... old-mem=1024000 new-mem=1548288 \
exe="/usr/sbin/libvirtd" hostname=? addr=? terminal=pts/2 res=failed

This patch will adjust where virDomainAuditMemory is called to
ensure the proper 'ret' value is used based on success or failure.

Additionally, the audit message should include the size of the
memory we were attempting to change to rather than the current
actual size. On failure to add, the message showed the same value
for old-mem and new-mem.

In order to do this, introduce a 'newmem' local which will compute
the new size based on the oldmem size plus the size of memory we
are about to add. NB: This would be the same as calling the
virDomainDefGetMemoryActual again on success, but avoids the
overhead of recalculating. Plus cur_balloon is already adjusted
by the same value, so this follows that.
Signed-off-by: NLuyao Huang <lhuang@redhat.com>

Commit f1f68ca3 overused mdir_name()
event though it was not needed in the latest version, hence labelling
directory one level up in the tree and not the one it should.

If anyone with SElinux managed to try run a domain with guest agent set
up, it's highly possible that they will need to run 'restorecon -F
/var/lib/libvirt/qemu/channel/target' to fix what was done.
Reported-by: NLuyao Huang <lhuang@redhat.com>
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

https://bugzilla.redhat.com/show_bug.cgi?id=1253107

Make a call virCgroupGetBlkioWeight to re-read blkio.weight right
after it is set in order to keep internal data up-to-date.
Signed-off-by: NLuyao Huang <lhuang@redhat.com>

Commit aa2cc7 modified a previously unnecessary but innocuous check
for interface IP address during interface update incorrectly, causing
all attempted updates (e.g. changing link state) to interfaces of
type='ethernet' for QEMU to fail.

This patch fixes the issue by completely removing the check for IP
address, which is pointless since QEMU doesn't support setting
interface IP addresses from the domain interface XML anyway.
Signed-off-by: NVasiliy Tolstov <v.tolstov@selfip.ru>
Signed-off-by: NLaine Stump <laine@laine.org>

We will try to set the node to cpuset.mems without check if
it is available, since we already have helper to check this.
Call virNumaNodesetIsAvailable to check if node is available,
then try to change it in the cgroup.
Signed-off-by: NLuyao Huang <lhuang@redhat.com>

We are automatically generating some socket paths for domains, but all
those paths end up in a directory that's the same for multiple domains.
The problem is that multiple domains can each run with different
seclabels (users, selinux contexts, etc.).  The idea here is to create a
per-domain directory labelled in a way that each domain can access its
own unix sockets.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1146886Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>