- 17 2月, 2017 1 次提交
-
-
由 Marc-André Lureau 提交于
Add new <devnode> top-level <device> element, that list the associated /dev files. Distinguish the main /dev name from symlinks with a 'type' attribute of value 'dev' or 'symlink'. Update a test to check XML schema, and actually add it to the test list since it was missing. Signed-off-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
-
- 18 1月, 2017 1 次提交
-
-
由 Boris Fiuczynski 提交于
fabric_name is one of many fc_host attributes in Linux that is optional and left to the low-level driver to decide if it is implemented. The zfcp device driver does not provide a fabric name for an fcp host. This patch removes the requirement for a fabric name by making it optional. Signed-off-by: NBoris Fiuczynski <fiuczy@linux.vnet.ibm.com>
-
- 19 3月, 2016 1 次提交
-
-
由 Martin Kletzander 提交于
If we expose this information, which is one byte in every PCI config file, we let all mgmt apps know whether the device itself is an endpoint or not so it's easier for them to decide whether such device can be passed through into a VM (endpoint) or not (*-bridge). Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1317531Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>
-
- 25 11月, 2015 1 次提交
-
-
由 Laine Stump 提交于
Report the maximum possible number of VFs for an SRIOV PF, like this: <capability type='virtual_functions' maxCount='7'> ... </capability> I've just discovered that the virtual_functions and physical_functions capabilities are not supported in the virNodeDeviceParse functions, only in virNodeDeviceFormat (I suppose because they are only reported, not set from XML). This should probably be remedied, but is less immediately useful than the current patch.
-
- 21 7月, 2015 1 次提交
-
-
由 Moshe Levi 提交于
Adding functionality to libvirt that will allow it query the interface for the availability of RDMA and tx-udp_tnl-segmentation Offloading NIC capabilities Here is an example of the feature XML definition: <device> <name>net_eth4_90_e2_ba_5e_a5_45</name> <path>/sys/devices/pci0000:00/0000:00:03.0/0000:08:00.1/net/eth4</path> <parent>pci_0000_08_00_1</parent> <capability type='net'> <interface>eth4</interface> <address>90:e2:ba:5e:a5:45</address> <link speed='10000' state='up'/> <feature name='rx'/> <feature name='tx'/> <feature name='sg'/> <feature name='tso'/> <feature name='gso'/> <feature name='gro'/> <feature name='rxvlan'/> <feature name='txvlan'/> <feature name='rxhash'/> <feature name='rdma'/> <feature name='txudptnl'/> <capability type='80203'/> </capability> </device>
-
- 04 6月, 2015 1 次提交
-
-
由 Ján Tomko 提交于
-
- 05 3月, 2015 1 次提交
-
-
由 James Chapman 提交于
Adding functionality to libvirt that will allow it query the ethtool interface for the availability of certain NIC HW offload features Here is an example of the feature XML definition: <device> <name>net_eth4_90_e2_ba_5e_a5_45</name> <path>/sys/devices/pci0000:00/0000:00:03.0/0000:08:00.1/net/eth4</path> <parent>pci_0000_08_00_1</parent> <capability type='net'> <interface>eth4</interface> <address>90:e2:ba:5e:a5:45</address> <link speed='10000' state='up'/> <feature name='rx'/> <feature name='tx'/> <feature name='sg'/> <feature name='tso'/> <feature name='gso'/> <feature name='gro'/> <feature name='rxvlan'/> <feature name='txvlan'/> <feature name='rxhash'/> <capability type='80203'/> </capability> </device> Signed-off-by: NJán Tomko <jtomko@redhat.com>
-
- 22 7月, 2014 1 次提交
-
-
由 John Ferlan 提交于
Add an optional unique_id parameter to nodedev. Allows for easier lookup and display of the unique_id value in order to document for use with scsi_host code.
-
- 16 6月, 2014 1 次提交
-
-
由 Michal Privoznik 提交于
This new element is there to represent PCI-Express capabilities of a PCI devices, like link speed, number of lanes, etc. Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
- 11 6月, 2014 1 次提交
-
-
由 Michal Privoznik 提交于
While exposing the info under <interface/> in previous patch works, it may work only in cases where interface is configured on the host. However, orchestrating application may want to know the link state and speed even in that case. That's why we ought to expose this in nodedev XML too: virsh # nodedev-dumpxml net_eth0_f0_de_f1_2b_1b_f3 <device> <name>net_eth0_f0_de_f1_2b_1b_f3</name> <path>/sys/devices/pci0000:00/0000:00:19.0/net/eth0</path> <parent>pci_0000_00_19_0</parent> <capability type='net'> <interface>eth0</interface> <address>f0:de:f1:2b:1b:f3</address> <link speed='1000' state='up'/> <capability type='80203'/> </capability> </device> Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
- 06 6月, 2014 1 次提交
-
-
由 Michal Privoznik 提交于
A PCI device can be associated with a specific NUMA node. Later, when a guest is pinned to one NUMA node the PCI device can be assigned on different NUMA node. This makes DMA transfers travel across nodes and thus results in suboptimal performance. We should expose the NUMA node locality for PCI devices so management applications can make better decisions. Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
- 15 8月, 2013 1 次提交
-
-
由 Xuesong Zhang 提交于
-
- 29 6月, 2013 1 次提交
-
-
由 Philipp Hahn 提交于
aae0fc2a removed the #elementsUSB anchor but did not update the links to point to the new section #elementsHostDev. Signed-off-by: NPhilipp Hahn <hahn@univention.de>
-
- 27 6月, 2013 1 次提交
-
-
由 Laine Stump 提交于
This includes adding it to the nodedev parser and formatter, docs, and test. An example of the new iommuGroup element that is a part of the output from "virsh nodedev-dumpxml" (virNodeDeviceGetXMLDesc()): <device> <name>pci_0000_02_00_1</name> <capability type='pci'> ... <iommuGroup number='12'> <address domain='0x0000' bus='0x02' slot='0x00' function='0x0'/> <address domain='0x0000' bus='0x02' slot='0x00' function='0x1'/> </iommuGroup> </capability> </device>
-
- 03 5月, 2013 1 次提交
-
-
由 Daniel P. Berrange 提交于
The rule generating the HTML docs passing the --html flag to xsltproc. This makes it use the legacy HTML parser, which either ignores or tries to fix all sorts of broken XML tags. There's no reason why we should be writing broken XML in the first place, so removing --html and adding the XHTML doctype to all files forces us to create good XML. This adds the XHTML doc type and fixes many, many XML tag problems it exposes. Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
- 25 3月, 2013 1 次提交
-
-
由 Osier Yang 提交于
This enrichs HBA's xml by dumping the number of max vports and vports in use. Format is like: <capability type='vport_ops'> <max_vports>164</max_vports> <vports>5</vports> </capability> * docs/formatnode.html.in: (Document the new XML) * docs/schemas/nodedev.rng: (Add the schema) * src/conf/node_device_conf.h: (New member for data.scsi_host) * src/node_device/node_device_linux_sysfs.c: (Collect the value of max_vports and vports)
-
- 23 8月, 2012 1 次提交
-
-
由 Yuri Chornoivan 提交于
-
- 07 12月, 2011 1 次提交
-
-
由 Osier Yang 提交于
This patch is to expose the fabric_name of fc_host class, which might be useful for users who wants to known which fabric the (v)HBA connects to. The patch also adds the missed capabilities' XML schema of scsi_host, (of course, with fabric_wwn added), and update the documents (docs/formatnode.html.in)
-
- 28 9月, 2011 1 次提交
-
-
由 Eric Blake 提交于
Coupled with the recent virsh nodedev-* doc patch, this should now give a better picture of libvirt node device handling. * docs/formatnode.html.in: Fill in page.
-
- 24 4月, 2008 1 次提交
-
-
由 Daniel P. Berrange 提交于
-