The API can be used outside the libvirt to get the launch security
information. When SEV is enabled, the API can be used to get the
measurement of the launch process.
Signed-off-by: NBrijesh Singh <brijesh.singh@amd.com>
Reviewed-by: NErik Skultety <eskultet@redhat.com>

When detaching a device it can be uniquely identified by its
alias. Instead of misusing virDomainDetachDeviceFlags which has
the same signature introduce new function.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Whenever we declare a new object the first member of the struct
has to be virObject (or any other member of that family). Now, up
until now we did not care about the name of the struct member.
But lets unify it so that we can do some checks at compile time
later.

The unified name is 'parent'.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NErik Skultety <eskultet@redhat.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>

introduce VIR_DOMAIN_INTERFACE_ADDRESSES_SRC_ARP to get ip address
of VM from the message of netlink RTM_GETNEIGH
Signed-off-by: NChen Hanxiao <chenhanxiao@gmail.com>
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

There is one limitation for using this API, when the guest is started
with all actions set to "destroy" we put "-no-reboot" on the QEMU
command line.  That cannot be changed while QEMU is running and
the QEMU process is always terminated no matter what is configured
for any action.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1460677Reviewed-by: NJohn Ferlan <jferlan@redhat.com>
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

Reviewed-by: NJohn Ferlan <jferlan@redhat.com>
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

https://bugzilla.redhat.com/show_bug.cgi?id=1497396

The other APIs accept both, ifname and MAC address. There's no
reason virDomainInterfaceStats can't do the same.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Interestingly enough, we don't document the point of view of the
interface statistics. Therefore it's unknown to users if for
instance rx_packets is the number of packets received by domain or
received by host (from domain). Document this explicitly.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Seeing a log message saying 'flags=93' is ambiguous & confusing unless
you happen to know that libvirt always prints flags as hex.  Change our
debug messages so that they always add a '0x' prefix when printing flags,
and '0' prefix when printing mode. A few other misc places gain a '0x'
prefix in error messages too.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Similar to domainSaveImageDefineXML this commit adds domainManagedSaveDefineXML
API which allows to edit domain's managed save state xml configuration.
Signed-off-by: NKothapally Madhu Pavan <kmp@linux.vnet.ibm.com>

Similar to domainSaveImageGetXMLDesc this commit adds domainManagedSaveGetXMLDesc
API which allows to get the xml of managed save state domain.
Signed-off-by: NKothapally Madhu Pavan <kmp@linux.vnet.ibm.com>

Add virDomainMigrateGetMaxDowntime to support querying maximum allowable
downtime during live migration.

The API docs for the various vir$OBJECTGetConnect functions
contain a warning

  WARNING: When writing libvirt bindings in other languages, do
  not use this function.  Instead, store the connection and
  the domain object together.

There is no reason why language bindings should not use this
method, and indeed the Perl, Python, and Go bindings all use
these methods.

This warning was originally added back in

  commit 3edb4bc9
  Author: Daniel Veillard <veillard@redhat.com>
  Date:   Tue Jul 24 15:32:55 2007 +0000

    * libvirt.spec.in NEWS docs/* po/*: preparing release 0.3.1
    * src/libvirt.c python/generator.py: some cleanup and warnings
      from Richard W.M. Jones

IIUC, the rational was that these APIs do not need to be
directly exposed to the non-C language, as the language
can expose the same concept itself by storing the original
virConnectPtr object alongside the virDomainPtr.  There's
no reason to mandate such an approach though - it is valid
for languages to expose this directly if that suits their
needs better.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

It's obvious that unsigned long long is 64 bit and also our web page
generator would misplace the comment after the return value due to the
way it's parsing them.

Use ATTRIBUTE_FALLTHROUGH, introduced by commit
5d84f596, instead of comments to
indicate that the fall through is an intentional behavior.
Signed-off-by: NMarc Hartmayer <mhartmay@linux.vnet.ibm.com>
Reviewed-by: NBoris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Reviewed-by: NBjoern Walk <bwalk@linux.vnet.ibm.com>

Allow starting the block-copy job for a persistent domain if a user
declares by using a flag that the job will not be recovered if the VM is
switched off while the job is active.

This allows to use the block-copy job with persistent VMs under the same
conditions as would apply to transient domains.

qemu requires that the topology equals to the maximum vcpu count.
Document this along with the API to set maximum vcpu count and the XML
element.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1426220

https://bugzilla.redhat.com/show_bug.cgi?id=1389313Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

Management tools may want to check whether the threshold is still set if
they missed an event. Add the data to the bulk stats API where they can
also query the current backing size at the same time.

The new API can be used to configure the threshold when
VIR_DOMAIN_EVENT_ID_BLOCK_THRESHOLD should be fired.

This patch adds support and documentation
for the emulation_faults perf event.
Signed-off-by: NNitesh Konkar <nitkon12@linux.vnet.ibm.com>

This patch adds support and documentation
for the alignment_faults perf event.
Signed-off-by: NNitesh Konkar <nitkon12@linux.vnet.ibm.com>

This patch adds support and documentation
for the page_faults_maj perf event.
Signed-off-by: NNitesh Konkar <nitkon12@linux.vnet.ibm.com>

This patch adds support and documentation
for the page_faults_min perf event.
Signed-off-by: NNitesh Konkar <nitkon12@linux.vnet.ibm.com>

This patch adds support and documentation
for the cpu_migrations perf event.
Signed-off-by: NNitesh Konkar <nitkon12@linux.vnet.ibm.com>

This patch adds support and documentation
for the context_switches perf event.
Signed-off-by: NNitesh Konkar <nitkon12@linux.vnet.ibm.com>

This patch adds support and documentation
for the page_faults perf event.
Signed-off-by: NNitesh Konkar <nitkon12@linux.vnet.ibm.com>

This patch adds support and documentation for
the task_clock perf event.
Signed-off-by: NNitesh Konkar <nitkon12@linux.vnet.ibm.com>

This patch adds support and documentation for
the cpu_clock perf event.
Signed-off-by: NNitesh Konkar <nitkon12@linux.vnet.ibm.com>

Similarly to domainSetGuestVcpus this commit adds API which allows to
modify state of individual vcpus rather than just setting the count.

This allows to enable CPUs in specific guest NUMA nodes to achieve any
necessary configuration.

This reverts commit ae16c95f.

This patch adds support and documentation for
a generalized hardware cache event called cache_l1d
perf event.
Signed-off-by: NNitesh Konkar <nitkon12@linux.vnet.ibm.com>

This patch adds support and documentation for
the ref_cpu_cycles perf event.
Signed-off-by: NNitesh Konkar <nitkon12@linux.vnet.ibm.com>

This patch adds support and documentation for
the stalled_cycles_backend perf event.
Signed-off-by: NNitesh Konkar <nitkon12@linux.vnet.ibm.com>

This patch adds support and documentation
for the stalled_cycles_frontend perf event.
Signed-off-by: NNitesh Konkar <nitkon12@linux.vnet.ibm.com>

This patch adds support and documentation
for the bus_cycles perf event.
Signed-off-by: NNitesh Konkar <nitkon12@linux.vnet.ibm.com>

The virDomainSendProcessSignal method says the flags values
come from virDomainProcessSignalFlag, but this enum has
never existed. No flags are needed for this method.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

This patch adds support and documentation
for the branch_misses perf event.
Signed-off-by: NNitesh Konkar <nitkon12@linux.vnet.ibm.com>

Lost during merge of commit id '8546adf8' and '585ad00b'