You need to sign in or sign up before continuing.
- 15 4月, 2010 1 次提交
-
-
由 Jim Meyering 提交于
* src/xen/xend_internal.c (xend_parse_sexp_desc_char): Add three uses of sa_assert, each preceding a strchr(value,... to assure clang that "value" is non-NULL.
-
- 06 4月, 2010 1 次提交
-
-
由 Matthias Bolte 提交于
-
- 01 4月, 2010 2 次提交
-
-
由 Matthias Bolte 提交于
Parsing is stricter now and doesn't accept trailing characters after the actual value anymore.
-
由 Matthias Bolte 提交于
This also fixes a bug in xenXMDomainConfigParse where uninitialized memory would be used as MAC address if sscanf fails.
-
- 27 3月, 2010 1 次提交
-
-
由 David Allan 提交于
* Add types to switch; the switch is only exectuted for known types because of a preceding conditional, so this fix is merely to placate the compiler.
-
- 26 3月, 2010 1 次提交
-
-
由 Daniel P. Berrange 提交于
To allow the new virDomainUpdateDeviceFlags() API to be universally used with all drivers, this patch adds an impl to all the current drivers which support CDROM or Floppy disk media change via the current virDomainAttachDeviceFlags API * src/qemu/qemu_driver.c, src/vbox/vbox_tmpl.c, src/xen/proxy_internal.c, src/xen/xen_driver.c, src/xen/xend_internal.c: Implement media change via the virDomainUpdateDeviceFlags API * src/xen/xen_driver.h, src/xen/xen_hypervisor.c, src/xen/xen_inotify.c, src/xen/xm_internal.c, src/xen/xs_internal.c: Stubs for Xen driver entry points
-
- 10 3月, 2010 1 次提交
-
-
由 Eric Blake 提交于
* global: patch created by running: for f in $(git ls-files '*.[ch]') ; do cppi $f > $f.t && mv $f.t $f done
-
- 09 3月, 2010 1 次提交
-
-
由 Laine Stump 提交于
A few more non-literal format strings in error log messages have crept in. Fix them in the standard way - turn the format string into "%s" with the original string as the arg.
-
- 08 3月, 2010 1 次提交
-
-
由 Eric Blake 提交于
Prior to this patch, there was an inconsistent mix between GNU and C99. For consistency, and potential portability to other compilers, stick with the C99 vararg macro syntax. * src/conf/cpu_conf.c (virCPUReportError): Use C99 rather than GNU vararg macro syntax. * src/conf/domain_conf.c (virDomainReportError): Likewise. * src/conf/domain_event.c (eventReportError): Likewise. * src/conf/interface_conf.c (virInterfaceReportError): Likewise. * src/conf/network_conf.c (virNetworkReportError): Likewise. * src/conf/node_device_conf.h (virNodeDeviceReportError): Likewise. * src/conf/secret_conf.h (virSecretReportError): Likewise. * src/conf/storage_conf.h (virStorageReportError): Likewise. * src/esx/esx_device_monitor.c (ESX_ERROR): Use C99 rather than GNU vararg macro syntax. * src/esx/esx_driver.c (ESX_ERROR): Likewise. * src/esx/esx_interface_driver.c (ESX_ERROR): Likewise. * src/esx/esx_network_driver.c (ESX_ERROR): Likewise. * src/esx/esx_secret_driver.c (ESX_ERROR): Likewise. * src/esx/esx_storage_driver.c (ESX_ERROR): Likewise. * src/esx/esx_util.c (ESX_ERROR): Likewise. * src/esx/esx_vi.c (ESX_VI_ERROR): Likewise. * src/esx/esx_vi_methods.c (ESX_VI_ERROR): Likewise. * src/esx/esx_vi_types.c (ESX_VI_ERROR): Likewise. * src/esx/esx_vmx.c (ESX_ERROR): Likewise. * src/util/hostusb.c (usbReportError): Use C99 rather than GNU vararg macro syntax. * src/util/json.c (virJSONError): Likewise. * src/util/macvtap.c (ReportError): Likewise. * src/util/pci.c (pciReportError): Likewise. * src/util/stats_linux.c (virStatsError): Likewise. * src/util/util.c (virUtilError): Likewise. * src/util/xml.c (virXMLError): Likewise. * src/xen/proxy_internal.c (virProxyError): Use C99 rather than GNU vararg macro syntax. * src/xen/sexpr.c (virSexprError): Likewise. * src/xen/xen_driver.c (xenUnifiedError): Likewise. * src/xen/xen_hypervisor.c (virXenError): Likewise. * src/xen/xen_inotify.c (virXenInotifyError): Likewise. * src/xen/xend_internal.c (virXendError): Likewise. * src/xen/xm_internal.c (xenXMError): Likewise. * src/xen/xs_internal.c (virXenStoreError): Likewise. * src/cpu/cpu.h (virCPUReportError): Use C99 rather than GNU vararg macro syntax. * src/datatypes.c (virLibConnError): Likewise. * src/interface/netcf_driver.c (interfaceReportError): Likewise. * src/libvirt.c (virLibStreamError): Likewise. * src/lxc/lxc_conf.h (lxcError): Likewise. * src/network/bridge_driver.c (networkReportError): Likewise. * src/nodeinfo.c (nodeReportError): Likewise. * src/opennebula/one_conf.h (oneError): Likewise. * src/openvz/openvz_conf.h (openvzError): Likewise. * src/phyp/phyp_driver.c (PHYP_ERROR): Likewise. * src/qemu/qemu_conf.h (qemuReportError): Likewise. * src/remote/remote_driver.c (errorf): Likewise. * src/security/security_driver.h (virSecurityReportError): Likewise. * src/test/test_driver.c (testError): Likewise. * src/uml/uml_conf.h (umlReportError): Likewise. * src/vbox/vbox_driver.c (vboxError): Likewise. * src/vbox/vbox_tmpl.c (vboxError): Likewise.
-
- 02 3月, 2010 2 次提交
-
-
由 Daniel P. Berrange 提交于
This extends the XML to allow for <clock offset='timezone' timezone='Europe/Paris'/> This is useful if the admin has not configured any timezone on the host OS, but still wants to synchronize a guest to a specific one. * src/conf/domain_conf.h, src/conf/domain_conf.c: Support extra 'timezone' attribute on clock configuration * docs/schemas/domain.rng: Add 'timezone' attribute * src/xen/xend_internal.c, src/xen/xm_internal.c: Reject configs with a configurable timezone
-
由 Daniel P. Berrange 提交于
The XML will soon be extended to allow more than just a simple localtime/utc boolean flag. This change replaces the plain 'int localtime' with a separate struct to prepare for future extension * src/conf/domain_conf.c, src/conf/domain_conf.h: Add a new virDomainClockDef structure * src/libvirt_private.syms: Export virDomainClockOffsetTypeToString and virDomainClockOffsetTypeFromString * src/qemu/qemu_conf.c, src/vbox/vbox_tmpl.c, src/xen/xend_internal.c, src/xen/xm_internal.c: Updated to use new structure for localtime
-
- 20 2月, 2010 1 次提交
-
-
由 Jim Meyering 提交于
* src/xen/xend_internal.c (xenDaemonDomainSetAutostart): Avoid a NULL dereference upon non-SEXPR_VALUE'd on_xend_start. This bug was introduced by commit 37ce5600.
-
- 19 2月, 2010 1 次提交
-
-
由 Jim Meyering 提交于
* src/xen/xend_internal.c (xenDaemonDomainSetAutostart): Rewrite to avoid dereferencing the result of sexpr_lookup. While in this particular case, it was guaranteed never to be NULL, due to the preceding "if sexpr_node(...)" guard, it's cleaner to skip the sexpr_node call altogether, and also saves a lookup.
-
- 10 2月, 2010 1 次提交
-
-
由 Daniel P. Berrange 提交于
-
- 09 2月, 2010 3 次提交
-
-
由 Matthias Bolte 提交于
-
由 Matthias Bolte 提交于
-
由 Jim Fehlig 提交于
Implementation of domain{Attach,Detach}DeviceFlags handlers in the drivers.
-
- 15 1月, 2010 1 次提交
-
-
由 Jim Meyering 提交于
* src/xen/xend_internal.c (wr_sync): Correct the diagnostic.
-
- 13 1月, 2010 1 次提交
-
-
由 Jim Fehlig 提交于
Upstream xen has changed parameters to the migration operation several times over the past 18 months. Changeset 17553 removed the resouce parameter, Changesets 17709, 17753, and 20326 added ssl, node, and change_home_server parameters respectively. Fortunately, testing has revealed that xend will fail the operation if a parameter is missing but happily honor it if unknown parameters are provided. Thus all currently supported parameters can be provided, satisfying current xend but not regressing older versions.
-
- 07 1月, 2010 1 次提交
-
-
由 Jim Meyering 提交于
* src/xen/xend_internal.c (xenDaemonOpen_unix): Do not dereference a NULL "conn". Move first deref to follow the "conn == NULL" test.
-
- 22 12月, 2009 1 次提交
-
-
由 Chris Lalancette 提交于
The Xen code for making HVM VT-d PCI passthrough attach and detach wasn't working properly: 1) In xenDaemonAttachDevice(), we were always trying to reconfigure a PCI passthrough device, even the first time we added it. This was because the code in virDomainXMLDevID() was not checking xenstore for the existence of the device, and always returning 0 (meaning that the device already existed). 2) In xenDaemonDetachDevice(), we were trying to use "device_destroy" to detach a PCI device. While you would think that is the right method to call, it's actually wrong for PCI devices. In particular, in upstream Xen (and soon in RHEL-5 Xen), device_configure is actually used to destroy a PCI device. To fix the attach problem I add a lookup into xenstore to see if the device we are trying to attach already exists. To fix the detach problem I change it so that for PCI detach (only), we use device_configure with the appropriate sxpr to do the detachment. * src/xen/xend_internal.c: don't use device_destroy for PCI devices and fix the other issues. * src/xen/xs_internal.c src/xen/xs_internal.h: add xenStoreDomainGetPCIID()
-
- 14 12月, 2009 2 次提交
-
-
由 Paolo Bonzini 提交于
This is trivial for QEMU since you just have to not stop the vm before starting the dump. And for Xen, you just pass the flag down to xend. * include/libvirt/libvirt.h.in (virDomainCoreDumpFlags): Add VIR_DUMP_LIVE. * src/qemu/qemu_driver.c (qemudDomainCoreDump): Support live dumping. * src/xen/xend_internal.c (xenDaemonDomainCoreDump): Support live dumping. * tools/virsh.c (opts_dump): Add --live. (cmdDump): Map it to VIR_DUMP_LIVE.
-
由 Paolo Bonzini 提交于
This patch adds the --crash option (already present in "xm dump-core") to "virsh dump". virDomainCoreDump already has a flags argument, so the API/ABI is untouched. * include/libvirt/libvirt.h.in (virDomainCoreDumpFlags): New flag for CoreDump * src/test/test_driver.c (testDomainCoreDump): Do not crash after dump unless VIR_DUMP_CRASH is given. * src/qemu/qemu_driver.c (qemudDomainCoreDump): Shutdown the domain instead of restarting it if --crash is passed. * src/xen/xend_internal.c (xenDaemonDomainCoreDump): Support --crash. * tools/virsh.c (opts_dump): Add --crash. (cmdDump): Map it to flags for virDomainCoreDump and pass them.
-
- 11 12月, 2009 1 次提交
-
-
由 Paolo Bonzini 提交于
This patch fixes the bug where paused/running state is not transmitted during migration. As a result, in the QEMU driver for example the machine was always started on the destination end. In order to do so, just read the state and if it is appropriate and set the VIR_MIGRATE_PAUSED flag. * src/libvirt.c (virDomainMigrateVersion1, virDomainMigrateVersion2): Automatically add VIR_MIGRATE_PAUSED when appropriate. * src/xen/xend_internal.c (xenDaemonDomainMigratePerform): Give a nicer error message when migration of paused domains is attempted.
-
- 10 12月, 2009 1 次提交
-
-
由 Matthias Bolte 提交于
Replace free(virBufferContentAndReset()) with virBufferFreeAndReset(). Update documentation and replace all remaining calls to free() with calls to VIR_FREE(). Also add missing calls to virBufferFreeAndReset() and virReportOOMError() in OOM error cases.
-
- 09 12月, 2009 1 次提交
-
-
由 Jim Fehlig 提交于
xen-unstable changesets 20321 and 20521 added support for description in xend domain config. This patch extends that support in xend backend. * src/xen/xend_internal.c: add parse and output of domain description
-
- 04 12月, 2009 1 次提交
-
-
由 Jiri Denemark 提交于
Xen HVM guests with PV drivers end up with two network interfaces for each configured interface. One of them being emulated by qemu and the other one paravirtual. As this might not be desirable, the attached patch provides a way for users to specify that only paravirtual network interface should be presented to the guest. The configuration was inspired by qemu/kvm driver, for which users can specify model='virtio' to use paravirtual network interface. The patch adds support for model='netfront' which results in type=netfront instead of type=ioemu (or nothing for newer xen versions) in guests native configuration. Xen's qemu ignores interfaces with type != ioemu and only paravirtual network device will be seen in the guest. Four possible configuration scenarios follow: - no model specified in domain's XML - libvirt will behave like before this change; it will set type=ioemu for HVM guests on xen host which is not newer than XEND_CONFIG_MAX_VERS_NET_TYPE_IOEMU - covered by existing tests - PV guest, any model - no functional change, model is passed as is (and ignored by the hypervisor) - covered by existing tests (e.g., *-net-e1000.*) - HVM guest, model=netfront - type is set to "netfront", model is not specified - covered by new *-net-netfront.* tests - HVM guest, model != netfront - type is set to "ioemu", model is passed as is - covered by new *-net-ioemu.* tests The fourth scenario feels like a regression for xen newer than XEND_CONFIG_MAX_VERS_NET_TYPE_IOEMU as users who had a model specified in their guest's configuration won't see a paravirtual interface in their guests any more. On the other hand, the reason for specifying a model is most likely the fact that they want to use such model which implies emulated interface. Users of older xen won't be affected at all as their xen provides paravirtual interface regardless of the type used. - src/xen/xend_internal.c: add netfront support for the xend backend - src/xen/xm_internal.c: add netfront support for the XM serialization too
-
- 30 11月, 2009 1 次提交
-
-
由 Paolo Bonzini 提交于
* src/xen/xend_internal.c (xend_op): Add ATTRIBUTE_SENTINEL.
-
- 26 11月, 2009 1 次提交
-
-
由 Matthias Bolte 提交于
Commit 790f0b30 causes the contents of the names array to be freed even on success, resulting in no listing of defined but inactive Xen domains. Spotted by Jim Fehlig
-
- 23 11月, 2009 1 次提交
-
-
由 Daniel P. Berrange 提交于
Introduce a new type="dir" mode for <disks> that allows use of QEMU's virtual FAT block device driver. eg <disk type='dir' device='floppy'> <source dir='/tmp/test'/> <target dev='fda' bus='fdc'/> <readonly/> </disk> gets turned into -drive file=fat:floppy:/tmp/test,if=floppy,index=0 Only read-only disks are supported with virtual FAT mode * src/conf/domain_conf.c, src/conf/domain_conf.h: Add type="dir" * docs/schemas/domain.rng: Document new disk type * src/xen/xend_internal.c, src/xen/xm_internal.c: Raise error for unsupported disk types * tests/qemuxml2argvdata/qemuxml2argv-disk-cdrom-empty.args: Fix empty disk file handling * tests/qemuxml2argvdata/qemuxml2argv-disk-drive-fat.args, tests/qemuxml2argvdata/qemuxml2argv-disk-drive-fat.xml, tests/qemuxml2argvdata/qemuxml2argv-floppy-drive-fat.args, tests/qemuxml2argvdata/qemuxml2argv-floppy-drive-fat.xml tests/qemuxml2argvtest.c: Test QEMU vitual FAT driver * src/qemu/qemu_conf.c: Support generating fat:/some/dir type disk args * src/security/security_selinux.c: Temporarily skip labelling of directory based disks
-
- 12 11月, 2009 2 次提交
-
-
由 Maximilian Wilhelm 提交于
* src/xen/xen_driver.c: Add support for VIR_MIGRATE_PERSIST_DEST flag * src/xen/xend_internal.c: Add support for VIR_MIGRATE_UNDEFINE_SOURCE flag * include/libvirt/virterror.h, src/util/virterror.c: Add new errorcode VIR_ERR_MIGRATE_PERSIST_FAILED
-
由 Jonas Eriksson 提交于
The xenUnifiedNumOfDomains and xenUnifiedListDomains methods work together as a pair, so it is critical they both apply the same logic. With the current mis-matched logic it is possible to sometimes get into a state when you miss certain active guests. * src/xen/xen_driver.c: Change xenUnifiedNumOfDomains ordering to match xenUnifiedListDomains.
-
- 11 11月, 2009 1 次提交
-
-
由 Daniel Veillard 提交于
* src/libvirt.c src/lxc/lxc_conf.c src/lxc/lxc_container.c src/lxc/lxc_controller.c src/node_device/node_device_hal.c src/openvz/openvz_conf.c src/qemu/qemu_driver.c src/qemu/qemu_monitor_text.c src/remote/remote_driver.c src/storage/storage_backend_disk.c src/storage/storage_driver.c src/util/logging.c src/xen/sexpr.c src/xen/xend_internal.c src/xen/xm_internal.c: Steve Grubb <sgrubb@redhat.com> sent a code review and those are the fixes correcting the problems
-
- 10 11月, 2009 1 次提交
-
-
由 Matthias Bolte 提交于
-
- 05 11月, 2009 1 次提交
-
-
由 Matthew Booth 提交于
A character device's target (it's interface in the guest) had only a single property: port. This patch is in preparation for adding targets which require other properties. Since this changes the conf type for character devices this affects a number of drivers: * src/conf/domain_conf.[ch] src/esx/esx_vmx.c src/qemu/qemu_conf.c src/qemu/qemu_driver.c src/uml/uml_conf.c src/uml/uml_driver.c src/vbox/vbox_tmpl.c src/xen/xend_internal.c src/xen/xm_internal.c: target properties are moved into a union in virDomainChrDef, and a targetType field is added to identify which union member should be used. All current code which touches a virDomainChrDef is updated both to use the new union field, and to populate targetType if necessary.
-
- 04 11月, 2009 1 次提交
-
-
由 Cole Robinson 提交于
All drivers have copy + pasted inadequate error reporting which wraps util.c:virGetHostname. Move all error reporting to this function, and improve what we report. Changes from v1: Drop the driver wrappers around virGetHostname. This means we still need to keep the new conn argument to virGetHostname, but I think it's worth it.
-
- 26 10月, 2009 1 次提交
-
-
由 Chris Lalancette 提交于
-
- 09 10月, 2009 1 次提交
-
-
由 Daniel P. Berrange 提交于
Introduces several new public API options for migration - VIR_MIGRATE_PEER2PEER: With this flag the client only invokes the virDomainMigratePerform method, expecting the source host driver to do whatever is required to complete the entire migration process. - VIR_MIGRATE_TUNNELLED: With this flag the actual data for migration will be tunnelled over the libvirtd RPC channel. This requires that VIR_MIGRATE_PEER2PEER is also set. - virDomainMigrateToURI: This is variant of the existing virDomainMigrate method which does not require any virConnectPtr for the destination host. Given suitable driver support, this allows for all the same modes as virDomainMigrate() The URI for VIR_MIGRATE_PEER2PEER must be a valid libvirt URI. For non-p2p migration a hypervisor specific migration URI is used. virDomainMigrateToURI without a PEER2PEER flag is only support for Xen currently, and it involves XenD talking directly to XenD, no libvirtd involved at all. * include/libvirt/libvirt.h.in: Add VIR_MIGRATE_PEER2PEER flag for migration * src/libvirt_internal.h: Add feature flags for peer to peer migration (VIR_FEATURE_MIGRATE_P2P) and direct migration (VIR_MIGRATE_PEER2PEER mode) * src/libvirt.c: Implement support for VIR_MIGRATE_PEER2PEER and virDomainMigrateToURI APIs. * src/xen/xen_driver.c: Advertise support for DIRECT migration * src/xen/xend_internal.c: Add TODO item for p2p migration * src/libvirt_public.syms: Export virDomainMigrateToURI method * src/qemu/qemu_driver.c: Add support for PEER2PEER and migration, and adapt TUNNELLED migration. * tools/virsh.c: Add --p2p and --direct args and use the new virDomainMigrateToURI method where possible.
-
- 23 9月, 2009 1 次提交
-
-
由 Chris Lalancette 提交于
Add the virStrncpy function, which takes a dst string, source string, the number of bytes to copy and the number of bytes available in the dest string. If the source string is too large to fit into the destination string, including the \0 byte, then no data is copied and the function returns NULL. Otherwise, this function copies n bytes from source into dst, including the \0, and returns a pointer to the dst string. This function is intended to replace all unsafe uses of strncpy in the code base, since strncpy does *not* guarantee that the buffer terminates with a \0. Signed-off-by: NChris Lalancette <clalance@redhat.com>
-
- 21 9月, 2009 1 次提交
-
-
由 Daniel P. Berrange 提交于
* src/Makefile.am, src/proxy_internal.c, src/proxy_internal.h src/sexpr.c, src/sexpr.h, src/xen_unified.c, src/xen_unified.h, src/xen_internal.c, src/xen_internal.h, src/xen_inotify.c, src/xen_inotify.h, src/xend_internal.c, src/xend_internal.h, src/xm_internal.c, src/xm_internal.h, src/xs_internal.c, src/xs_internal.h: Move to src/xen/ directory * proxy/Makefile.am, proxy/libvirt_proxy.c, src/Makefile.am, src/libvirt.c, tests/sexpr2xmltest.c, tests/statstest.c, tests/xencapstest.c, tests/xmconfigtest.c, tests/xml2sexprtest.c: Adapt to changed xen location * src/stats_linux.h, src/stats_linux.c: Remove xen specific block stats APIs * src/qemu_driver.c, src/uml_driver.c: Add missing sys/un.h include uncovered after change to stats_linux.h * src/xen/block_stats.h, src/xen/block_stats.c: Add xen specific block stats APIs
-